MSI Z690 pro wifi DDR4 - I9-12900K - fenvi - RX580 - RX3080ti - NVME

[titoon]

good morning all

i return to the forum for my new hackintosh on which i block fir its installation of Ventura and this is also my first time using opencore. My configuration of my machine is planned with 2 graphics cards so that i can also run under UNRAID OS. i use each card output in displayport with the 2 identical monitors.When i boot on the Ventura OSX, the display goes to the output of the RX3080ti off i would like it to come out only on the RX580 for its compatibility with OSX.

For MaLdOn : i tested your patched DSDT but i can'tget to the installation os Ventura , it block at the ACPI level.  ( SSDT-OLARILA600.aml )

when i look at opencore it speaks that ACPI absolutely must have : SSDT-Plug-ALt.aml. and SSDT-AWAC-disable.aml. and SSDT-DMAC.aml. and SSDT-EC.aml. 

My config,Plist  is MACPRO7.1 with GenSMBIOS.

 

Motherboard.  MSI Z690-A PRO Wifi DDR4. ( MS-7D25 )  bios ver  E7D25IMS.192

Cpu : Intel I9-12900K

Ram  2 X corsair  DDR4. 3200. 16- 20-20-38 1,350v

Graphique 1  on PCIE1 Gen5  RX3080TI

graphique 2 on PciE2 Gen4  RX580 pulse 

NVME 1. : Windows 11

NVME2 : planned to install OSX

NVME3 : reserved Unraid cache

NVME4 : reserved Unraid VM - docker - data 

PCIE-5 : Fenvi card wifi/bluetooth   ( Wifi on board desactived )

thanks for your help , Phil 

 

 

[MaLd0n]

https://www.olarila.com/topic/20908-easy-fast-and-perfect-vanilla-hackintosh-clover-and-opencore-windows-linux-or-macos/

[titoon]

hi MaldOn,

I have no problem wanting to donate , but I would like to have answers to my questions and so to move forward together if possible, because I already did this in the past but I did not receive any results.my config is certainly not imple but I do not believe that it remains impossible to achieve.I would like to be able to install MacOs (Monterey or Ventura) on this configuration which obviously has 2 graphics cards installed in this machine.

I obviously tried a lot of EFI to guide me but unfortunately none of them have this hardware installed like me, so would you be able to guide me and be able to install MacOSX on it without having to remove this RTX3080i? After many tries, I'm stuck at this.

best regards ,Phil

 

[MaLd0n]

1- update bios to last version

2- use bios in full default

3- use olarila efi folder for alder lake

4- use usb2 port for easy installation

5- we need disable this nvidia via acpi or device properties

[titoon]

9 hours ago, MaLd0n said:

1- update bios to last version

2- use bios in full default

3- use olarila efi folder for alder lake

4- use usb2 port for easy installation

5- we need disable this nvidia via acpi or device properties

1 Bios : it's laste.  : 7D25V192. 2022-10-17

2 : I'm going to set it back to default and put this:

VT-D  enable ,  CFG  disable , Wifi and bluetooth on board  disable  , TB  disable , intel speed test  enable , TPM disable.

3 : I am using your file right now with your SSDT-olarila-600.aml. and I also tested with your DSDT.aml from the forum you        made , I redo a new usb stick with ventura and I only place your EFI on it with only the SSDT-olarila-600.aml.

4: i use only this port , no use USB3.0.

5 : I don't know how I can achieve this, here is the photo of the motherboard where I placed my elements on it.

[titoon]

hi, 

here, I redid everything from points 1 to 5 and I arrive at this

url=https://zupimages.net/viewer.php?id=22/46/enkm.jpg][/url]

 

[titoon]

hi MaLdON,

I went back to Windows to recover my ACPI extract my DSDT.AML file and I took the opportunity to look at the properties of my 2 graphics cards:

RTX3080ti

PCIROOT (0) PCI(0100) PCI (0000)

ACPI (_sb_) ACPI (pc00) ACPI (PEG1) ACPI ( PEGP)

SB PC00 PEG1 PEGP

 

RX580 

PCIROOT (0) PCI(1C04) PCI (0000)

ACPI (_sb_) ACPI (pc00) ACPI (RP05) ACPI ( PXSX)

SB PC00 RP05 PXSX

I modified the SSDT-GPU-DISABLE file with my values for the RTX3080,attached files are my DSDT.aml and SSDT-GPU-disable-rtx3080.

when I start, I am blocked on APPLEkeystoretest.  

ACPI.zip

[titoon]

hi, MaLdOn,

I am finally on the installation of Monterey, after 40 hours of work en test.

 to place my 2 monitors on the Rx580 board, for the moment it turns, it is with this one that I write 

 

url=https://zupimages.net/viewer.php?id=22/46/kyb4.png][/url]

Edited November 20, 2022 by titoon