Monterey 12.6 on HP ProDesk 600 G6

[JeVr0oz]

Hello everyone, I installed Monterey 12.6 on HP ProDesk 600 G6 ?
(And update on Ventura without issues)

For informations : 

CPU : i5 10500T Comet Lake-S
Motherboad chipset : Comet Point-H Q470
GPU: Intel UHD Graphics 630
Sound : Realtek ALC987
RAM : 32GB 2666Mhz
Ethernet : Intel I219-LM
WiFi/BT : Intel AX201 Intel AX200 WiFi 6 / BT 5
SSD : Nvme KIOXIA 512GB + Nvme KIOXIA 256Go (has data and EFI backup)
All USB ports works (6 USB 3.0 + 1 USB type-C 3.2)

All working without errors. I'm very happy  
Computer is small, quiet and super fast.
Dortania method with OpenCore 0.8.5 and .kext form Olarila (Thanks again to @MaLd0n) for perfect EFI folder ❤️ 

 

macOS Ventura update works, just update the kext to alpha or beta and it's works.
For AX201, remove it and find a AX200 to replace. It's working perfectly with airportitlwm.kext 2.2.0 alpha version  
 

BIOS Settings : 

Security : 
TPM Embedded, TPM Device : Enabled
BIOS Sure Start : All disabled, just "Dynamic Runtime Scanning of Boot Block" checked
Secure Boot : All disabled
Intel Software Guard : Disabled

Advanced :
Boot options : Startup Delay : 0 Enabled : Fast boot; USB Storage Boot, Audio Alerts during boot, UEFI Boot Order : 1) OpenCore
HP Sure Recover : All disabled
System Options : Enabled : Turbo-Boost, Hyperthreading, VTx
Built-IN Devices : Enabled : Embedded LAN Controller, Audio Device, Internal Speakers, M2 USB/Bluetooth, Video Memory Size: 256Mb



Want to find a Intel Core i7 10700T for replace the i5.

[idle4you]

Good afternoon!
Could you provide your EFI folder for download?

[JeVr0oz]

59 minutes ago, idle4you said:

Good afternoon!
Could you provide your EFI folder for download?

Of course yes, it's this link : https://drive.google.com/drive/folders/16XgI1G5GKGJusCpwPwbP6kwZXSyMtCyI?usp=sharing

[smdc19812011]

can you share your bios settings to make this work?

[siamcolo]

Big thanks for EFI

#wait efi for ventura?

On 11/30/2022 at 7:22 AM, smdc19812011 said:

can you share your bios settings to make this work?

Secure Boot #off

[JeVr0oz]

1 hour ago, siamcolo said:

Big thanks for EFI

#wait efi for ventura?

Secure Boot #off

I've made Ventura upgrade.
Just make update kext  
I've changed the WIFI card, just put an AX200 and remove the stock AX201, mine works like a charm.
Update the kext and it's working good  

[siamcolo]

On 12/1/2022 at 6:46 PM, JeVr0oz said:

I've made Ventura upgrade.
Just make update kext  
I've changed the WIFI card, just put an AX200 and remove the stock AX201, mine works like a charm.
Update the kext and it's working good  

?Thanks , I Will Buy AX200 ?

 

[smdc19812011]

On 12/1/2022 at 7:46 PM, JeVr0oz said:

I've made Ventura upgrade.
Just make update kext  
I've changed the WIFI card, just put an AX200 and remove the stock AX201, mine works like a charm.
Update the kext and it's working good  

do you have an updated EFI for ventura?

[Cimafranca, Bracil G.]

Hello. Does Airdrop, handoff, sidecar airplay, continuity and other wireless features of macOS works on the AX200 card?

[JeVr0oz]

Yes, it's works  
Sidecar I don't use it I don't know if it's works

[Cimafranca, Bracil G.]

Thank you. Just the info i needed to purchase one. Thank you for the response. 

[smdc19812011]

anyone tried dual monitors? my prodesk has 2 dport monitors and only 1 is detected after successful install. hope anyone can help

BTW this rocks! just followed the dortiana and used this EFI and boom!

Edited January 16, 2023 by smdc19812011

[smdc19812011]

On 1/17/2023 at 4:43 AM, smdc19812011 said:

anyone tried dual monitors? my prodesk has 2 dport monitors and only 1 is detected after successful install. hope anyone can help

BTW this rocks! just followed the dortiana and used this EFI and boom!

Already resolved my issue. Dual monitor working

[CloverLeaf]

On 1/19/2023 at 2:22 AM, smdc19812011 said:

Already resolved my issue. Dual monitor working

 

Hey buddy, can you share how you solve the problem ?

[smdc19812011]

On 1/21/2023 at 6:13 AM, CloverLeaf said:

 

Hey buddy, can you share how you solve the problem ?

Used 2 DP to VGA and it works. Tried 2 DP to HDMI or 1 dp to HDMI and 1 DP to VGA and the vga out is the only one that works. In terms of resolution its able to output 1080 to my 1080 monitors.

[Thun Fischente]

hi, thank you so much for your sharing EFI, everything works perfectly, but when I use sleep, the machine just at lock screen status because the light of mouse is still active, do you meet the same issue with me?

[micnad]

Hello.
The link for the EFI does not work anymore.
Can you upload it again?
What changes did you make in the bios?
Can you provide a copy of the settings of this one.
Thank you.

[JeVr0oz]

On 4/13/2023 at 5:08 PM, micnad said:

Hello.
The link for the EFI does not work anymore.
Can you upload it again?
What changes did you make in the bios?
Can you provide a copy of the settings of this one.
Thank you.

EFI link works for me.
I will write the BIOS settings in somes hours. I lost my Hackintosh after update of OpenCore and no EFI backup, I will make a new installation 

[JeVr0oz]

On 4/13/2023 at 5:08 PM, micnad said:

Hello.
The link for the EFI does not work anymore.
Can you upload it again?
What changes did you make in the bios?
Can you provide a copy of the settings of this one.
Thank you.

First post edited for BIOS settings

[billyj]

On 1/23/2023 at 4:48 PM, smdc19812011 said:

Used 2 DP to VGA and it works. Tried 2 DP to HDMI or 1 dp to HDMI and 1 DP to VGA and the vga out is the only one that works. In terms of resolution its able to output 1080 to my 1080 monitors.

Hi, great to know you were able to enable both DP; I have a question - did you make any changes to the EFI or was it plug and play.. because I have an HP Pro Desk 600 G2 using DP to HDMI adapters but can't seem to get the second monitor working. Your assistance will be highly appreciated.

[Bruno Santana]

On 10/18/2022 at 8:17 PM, JeVr0oz said:

Hello everyone, I installed Monterey 12.6 on HP ProDesk 600 G6 ?
(And update on Ventura without issues)

For informations : 

CPU : i5 10500T Comet Lake-S
Motherboad chipset : Comet Point-H Q470
GPU: Intel UHD Graphics 630
Sound : Realtek ALC987
RAM : 32GB 2666Mhz
Ethernet : Intel I219-LM
WiFi/BT : Intel AX201 Intel AX200 WiFi 6 / BT 5
SSD : Nvme KIOXIA 512GB + Nvme KIOXIA 256Go (has data and EFI backup)
All USB ports works (6 USB 3.0 + 1 USB type-C 3.2)

All working without errors. I'm very happy  
Computer is small, quiet and super fast.
Dortania method with OpenCore 0.8.5 and .kext form Olarila (Thanks again to @MaLd0n) for perfect EFI folder ❤️ 

 

macOS Ventura update works, just update the kext to alpha or beta and it's works.
For AX201, remove it and find a AX200 to replace. It's working perfectly with airportitlwm.kext 2.2.0 alpha version  
 

BIOS Settings : 

Security : 
TPM Embedded, TPM Device : Enabled
BIOS Sure Start : All disabled, just "Dynamic Runtime Scanning of Boot Block" checked
Secure Boot : All disabled
Intel Software Guard : Disabled

Advanced :
Boot options : Startup Delay : 0 Enabled : Fast boot; USB Storage Boot, Audio Alerts during boot, UEFI Boot Order : 1) OpenCore
HP Sure Recover : All disabled
System Options : Enabled : Turbo-Boost, Hyperthreading, VTx
Built-IN Devices : Enabled : Embedded LAN Controller, Audio Device, Internal Speakers, M2 USB/Bluetooth, Video Memory Size: 256Mb



Want to find a Intel Core i7 10700T for replace the i5.

Hey there.

First of all, great job on running BigSur on this.

I have recently purchased one too, but with an i7 10700T processor included.

I was planning on getting Ventura or even Sonoma.

 

Given our processor variant, is there anything that would I need to change from your EFI to make it work with my i7 variant?

 

Apart from that, I believe Ventura requires some specific changes from BigSur, but I can't remember which ones (I have already made them on two other devices I own [SP4 and Acer NITRO 5] and no longer have the BigSur EFIs.

 

Would you be willing to shed some light on this issue?

 

Thank you in advance.

 

Best regards,

Bruno.

[JeVr0oz]

On 9/8/2023 at 12:13 PM, Bruno Santana said:

Hey there.

First of all, great job on running BigSur on this.

I have recently purchased one too, but with an i7 10700T processor included.

I was planning on getting Ventura or even Sonoma.

 

Given our processor variant, is there anything that would I need to change from your EFI to make it work with my i7 variant?

 

Apart from that, I believe Ventura requires some specific changes from BigSur, but I can't remember which ones (I have already made them on two other devices I own [SP4 and Acer NITRO 5] and no longer have the BigSur EFIs.

 

Would you be willing to shed some light on this issue?

 

Thank you in advance.

 

Best regards,

Bruno.

Hello, 

 

no changes required for your CPU
Ventura don't needs any change, just use the EFI and update de kext.

For now, I test it with Sonoma, all works for now. Just the WiFi is disabled and I don't find anything about it on Sonoma.

[Erik Carlin]

When you say update kext, what do you mean? I see that folder in the efi file I downloaded but not sure what I do with Kext, ty! 

[MaLd0n]

https://www.olarila.com/topic/38117-how-to-update-opencore-and-kexts-easy-way-with-ocat/

[Exnos]

On 10/18/2022 at 2:17 PM, JeVr0oz said:

 

 

Hey I tried this and it's not working. All I get is a blank screen. I used your EFI from your Google drives EFI.zip. I extracted it then placed it in the EFI partition and it boots. When I select Install Monterey it starts to load and then it goes black. It's booting and even goes to sleep so it on. The screen is just black. I am using a Display port to HDMI adaptor because this machine only has Display ports so the EFI should already be configured for this. How did you get it working?