GA Z77-D3H cant boot from disk

[BizoDent]

Hi every one,

I am totally new to hackintoosh and Mac OS X (zero experience)

I managed to install Mountain Lion 10.8.3 from usb on my PC and all went good but when I tried to boot from the hard drive I failed. I can only reboot from the usb drive through Clover using the following settings;

-Tables dropping menu: SSDT [+]

- Graphics injection menu: Inject EDID

- Binaries patching menu: AppleIntelCPUPM patch [+]

Apple RTC patch [+]

- and then boot OS X in verbose mode (64-bit)

Any scenario other than this will crash, hang or restart the PC

Tried many combinations in multishit with no effect

Also tried Clover and Chameleon standalone bootloaders with no luck

My system specs:

CPU: i7-3770

MoBo: GA Z77-D3H

Graphics card: on board Intel HD 4000

Any help will be appreciated

Thank you

[artur-pt]

hello

no suport here to "beast" thing...

anyway

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

about u graphics in cpu , hd4000

http://Olarila.com/forum/viewtopic.php?f=18&t=3111

good hack

[BizoDent]

Thank you very much artur-pt. I followed your instructions and it worked like charm. It boots from the hard drive without any trouble

Now the only problem I have is making the sound work. I found a post here about the same motherboard I have but it is talking about F14 bios and mine is F18. Can anyone help with that???

[artur-pt]

hello

take a look here

http://www.osx86.net/view/3743-ga-z77-d3h_-_collection_of_dsdts.html

good hack

[BizoDent]

I tried both files with no luck

Thank you for your help though

[artur-pt]

hello

what is u sound ? is VIA ?

should work with voodoohda last versions

http://Olarila.com/forum/viewtopic.php?f=28&t=454

good hack

[BizoDent]

That was too hard for me. This is my first ever experience with OS X and Mac. Can't understand the codes and how to inject them or edit kexts and all this stuff

Finally I bought a usb sound card that is working flawlessly out of the box and cost me only about 1.5 $

But thank you very much sir for your help

[planetearth90]

That was too hard for me. This is my first ever experience with OS X and Mac. Can't understand the codes and how to inject them or edit kexts and all this stuff

Finally I bought a usb sound card that is working flawlessly out of the box and cost me only about 1.5 $

But thank you very much sir for your help

 

You need to just see what audio chip is on your motherboard, you can look at the specs on Gigabyte's website. I have the GA-Z77-DS3H rev1.1 and it has a Realtek ALC887. multishit 5.2.1 has numerous non DSDT audio codecs, If you click the right arrows it drops down to more choices you should be able to find the exact codec for it. Mine worked fine after using the current (newer) codec.