Easy, Fast and Perfect Vanilla Hackintosh

[José SkyMoon]

Vanilla Lion EFI Folder?

[MaLd0n]

9 hours ago, José SkyMoon said:

Vanilla Lion EFI Folder?

Same folder

[Eweol]

Hi there,

Thank you for this Forum.
I try since 3 weeks to bring up MacOs Ventura on my 13" Surface Book 3 with i7 with dGPU.
I tried a lot of different EFI's, also such ones from this forum, but anytime without success.

After I wrote the raw image on my USB2.0 Image and put for example the IceLake-Mod EFI from this Forum on the stick, I can start the Installation process without issues.
I can format the SSD (most times I need more than one tries to erase or create the partition / storage stuff because within the process, the SFB will power off and then on again and maybe the work wasn't finished!).

As far as the SSD is created on the right way in APFS I can choose it with the installer and continue.
Then the first installation step is running and will work until there are 12 minutes remaining.
Then the SFB normal shutdown and restart.
After the restart I get the "Install MacOs" entry in OC an can choose that.
The 2. Installation Process will start with something linke 29 minutes remaining and here I get the problem.
This step will break after different amount of time. Sometimes after 2 minutes, sometimes after 30 minutes and sometimes it count's down the minutes but show no progress in progressbar and then show forever "Less than a minute remaining".

What could it be I'm doing wrong?

[MaLd0n]

5 hours ago, Eweol said:

Hi there

What processor this notebook have?

[Eweol]

What processor this notebook have?

Hi,

It is an

10th Gen Intel[emoji2400] Core[emoji769] i7-1065G7 Ice Lake, 4 cores, 8 threads, 8MB SmartCache, 1.30 → 3.90 GHz Intel[emoji2400] Iris[emoji2400] Plus Graphics, 64 Execution Units, 300 → 1100 MHz


Gesendet von iPhone mit Tapatalk

[MaLd0n]

Post one photo on error screen with this efi folder

-NoteBook IceLake Download HERE

-Procedure-

-Bios/UEFI in full default settings(Just change settings if need)
-Use USB2 port for easy installation with no remap USB
-Users with IGPU can use -igfxvesa bootarg for easy installation
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

[Eweol]

1 hour ago, MaLd0n said:

Post one photo on error screen with this efi folder

-NoteBook IceLake Download HERE

-Procedure-

-Bios/UEFI in full default settings(Just change settings if need)
-Use USB2 port for easy installation with no remap USB
-Users with IGPU can use -igfxvesa bootarg for easy installation
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

Thanks for helping.

Without -igfxvesa I get this error Share
With -igfxvesa I can run the installer, format the SSD and Start first installing step.
At "12 minutes remaining" my SFB 3 crashes and restarts.
In OC is no entry "Install MacOs" only "Reset NVRAM" and "Install Ventura (external)"

I don't have USB2.0 Ports on my surface book so I used an 2.0 port on my ThunderBolt 4 Dock

[MaLd0n]

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md#intel-iris-plus-graphics-ice-lake-processors

[Eweol]

On 8/10/2023 at 6:02 PM, MaLd0n said:

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md#intel-iris-plus-graphics-ice-lake-processors

Sry if it sound a little bit dump but I don't know what to do with that link.

[Baby_gugugaga]

Hello, can I get a patch?

Send+me+iMac-Pro-11111.zip.zip

[IM_Maddy]

hi admin

 

here is my sendme dump zip file please share the patch for my laptop DELL G3 3579.

https://drive.google.com/file/d/1A95SjOYxYFgCAnsmnPEf_WJlXKQPhkSu/view?usp=share_link

Please add the .zip extension after downloading the file from GDrive.. it was not allowing me to upload as .zip file

Thank you

[maverikdj]

Hello i have Lenovo B590 with 8gb ram, ssd 256, intel vga x4000. i followed any step for make usb installer but nothing, screen is grey. same installer on desktop asus p8h67 with i5-3330 work perfectly. why?

Screenshot 2023-08-22 143204.rar

[MaLd0n]

https://www.olarila.com/topic/20908-easy-fast-and-perfect-vanilla-hackintosh/

-Procedure-

-Bios/UEFI in full default settings(Just change settings if need)
-Use USB2 port for easy installation with no remap USB
-Users with IGPU can use -igfxvesa bootarg for easy installation
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

-USB Remap https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2023/

[Nataraj M]

I have HP 17-BY Laptop. I have tried to install MOnterey and Ventura both, what happens is in Disk Utility SSD not shown when installing macos, the same ssd connected as external it shows. How to make it visible for macos MOnterey or Ventura  installation. Pls help me 

[GinoMac]

On 12/11/2021 at 4:10 PM, MaLd0n said:

 Easy, fast and perfect Vanilla Hackintosh with Clover and Opencore - Windows, Linux or macOS - How to - Step by Step - Guide - Tutorial

 

Support Olarila Vanilla Hackintosh by making a donation HERE

About Premium Users you can check HERE

Problems with Paypal HERE

 

Some Basic Information

-Bios/UEFI in full default settings(Just change settings if need)

-Use USB2 port for easy installation with no remap USB

-If you have only IGPU use -igfxvesa bootarg for easy installation

-Delete old EFI folder and paste new. Don't use merge files

-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead

-Reset NVRAM one time - OpenCore use entry "Reset Nvram" / Clover use F11 key on boot screen

 

Bios/UEFI Configuration

-Sata = AHCI mode

-Secure Boot = Disable if need

-CSM = Disable with AMD cards

 

*If you used SSDT instead DSDT uncheck RebaseRegions in Acpi tab

*You can request one full ACPI solution HERE and Premium Users HERE

*After installation you need remove unnecessary files like unused Lan kexts

*If your GPU don't need agdpmod=pikera, remove this bootarg

*If your LAN card don't need dk.e1000=0 and e1000=0, remove these bootargs

*Users with IGPU need change SMBIOS (example: for Skylake Processor change smbios iMacPro1,1 to iMac17,1)

*Generate a good and valid serial for you

 

Step 1 - Downloading Olarila Vanilla Images or Create one Vanilla USB Installer

1a) Olarila Images (Windows, Mac or Linux)
https://www.olarila.com/topic/6278-hackintosh-and-macintosh-olarila-vanilla-images-macos/

1b) How to create USB Installer (Mac)
https://www.olarila.com/topic/6185-guide-how-to-create-personal-vanilla-macos-image-or-usb-installer/

 

Step 2 - Burning Olarila Images with Balena Etcher (Windows, Mac or Linux)

2a) Download Link https://www.balena.io/etcher/

 

Step 3 - Downloading correct EFI folder for your hardware (Clover or OpenCore)

3a) https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

 

Step 4 - Copying EFI folder to USB EFI partition (Mac or Windows)

4a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/

 

Step 5 - Formatting SSD on Installer

5a) On Disk Utility Change "View" options to "Show All Devices"

5b) Selecting and formatting SSD. Use GUID and APFS

 

Step 6 - Copying EFI folder to SSD EFI partition after Installation

6a) https://www.olarila.com/topic/12857-hackintosh-how-to-mount-efi-partition-on-macos-or-windows/

 

Step 7 - Starting a real fine tune with full ACPI solution

7a) Extracting full Dump with RunMe.app

https://www.olarila.com/topic/10301-hackintosh-olarila-runme-dumper-app/

7b) Posting full dump for one full ACPI solution

-Donators and Premium users have a personal room for that. Check link bellow.

https://www.olarila.com/forum/84-dsdt-patch-requests/

-Check link bellow about Premium and Donators users

https://www.olarila.com/topic/7717-important-premium-and-donators-users/

-DSDT patch requests (Post in this topic if you want FULL DSDT patched, please don't open a new topic, unless you are trying to learn how to do it yourself and need help.)

 

Step 8 - USB Port Mapping

8a) https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2021-mojave-catalina-bigsur-monterey/

 

Step 9 - Dual Boot with OpenCore and Full ACPI Solution

9a) With Official OpenCore

https://www.olarila.com/topic/13019-hackintosh-dual-boot-with-opencore-with-full-acpi-and-real-vanilla-solution/

9b) With MOD Opencore

https://www.olarila.com/topic/24542-opencore_no_acpi-opencore-with-additional-featureschanges-implemented/

 

Step 10 - How to update OpenCore bootloader

10a) https://www.olarila.com/topic/14268-how-to-update-opencore-bootloader-on-hackintosh-easy-and-fast-way/

 

Credits: 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

Guys I’m stuck on this screen

how can I resolve?

thanks

IMG_6983.zip

[MaLd0n]

https://www.olarila.com/topic/25111-hackintosh-efi-folders-with-opencore-mod/

[dhanushbuddha]

My laptop specs:

Dell lattitude 65420

bios version a08

with i7 proecessor

sandy bridge

with nividia nvs 400 and hd 3000 GPU 

Bios AHCI

Problem: USB stick not detected in boot menu  please help me fix this

(tried to install high sierra)

5 minutes ago, dhanushbuddha said:

My laptop specs:

Dell lattitude 65420

bios version a08

with i7 proecessor

sandy bridge

with nividia nvs 400 and hd 3000 GPU 

Bios AHCI

Problem: USB stick not detected in boot menu  please help me fix this

(tried to install high sierra)

 

[Hitesh Ahlawat]

Hello sir 

I have i3 2120 processor with legacy bios (no uefi)

so can you guide me how to install macos bigsur on this pc

I will be highly grateful to you

Thank you

Please help

[leoozaca]

Patch request for my Hackintosh i511400F + Gigabyte H510M-H + RX580 here's my file from RunmeApp https://www.icloud.com/iclouddrive/0c5VQaCqGFLjx9scZBfX8NgEg#Send_me_iMac-Pro-de-Leonardo

[oper_cat]

Hello, please help me I can’t install any mac os

Ryzen 7 1700x

MSI B450m Mortal max

Rx460 4 gb

[MaLd0n]

https://www.olarila.com/topic/25111-hackintosh-efi-folders-with-opencore-mod/

[ballslover77]

While I was trying to boot up. it showed this screen instead of the normal Apple logo. don't know how to fix it. couldn't find a tutorial on YouTube or anything. (yes I did go to apple.com that didn't help)

 

https://www.mediafire.com/file/7fex5xt2l1btu5a/Error.jpg/file

 

 

(sorry i dont know how to attach images i promise with my life its not a virus its just a mac os error)

Edited September 16, 2023 by ballslover77

[oper_cat]

12 hours ago, MaLd0n said:

https://www.olarila.com/topic/25111-hackintosh-efi-folders-with-opencore-mod/

I tried, unfortunately it doesn’t install

Just now, oper_cat said:

I tried, unfortunately it doesn’t install

Yes, I also wanted to say. I found an efi for my motherboard, but when loading, the Apple icon is visible; the loading goes halfway and that’s it.

[Hitesh Ahlawat]

Hello sir 

I have i3 2120 processor with legacy bios (no uefi)

so can you guide me how to install macos bigsur on this pc

I will be highly grateful to you

Thank you

Please help

[garwas89]

Hey,

 

I am able to get to the install screen now!  But, the screen goes out immediately.  

i5-7400

iGPU

 

I'm guessing there's an issue with the driver for the iGPU, but I can't seem to find the fix.  Sorry if I'm blind!