Easy, Fast and Perfect Vanilla Hackintosh

[Bernat Fortuny]

Hi, I need some help.
I have installed macOS Monterey on my old HP laptop but I'm unable to make the network card run, I can't use ethernet or WIFI. I think I've tried all kext I've found cause I didn't remember the card model but none of them worked, I don't know what more to do, and I get this error when I try to run Heliport. I don't know if I'm doing something wrong when adding the kext, I mount the EFI from the drive, I add the kext to the kext folder and then I add it to the config.plist

Specs:
- Intel Core i5-6200U
- Memory 12GB DDR4
- HDD 1TB
- Motherboard: IDK, it's a laptop and I can't even find the exact model on Google

IMG_20230504_050910 (1).rar

[MaLd0n]

Use hackintool and check on pciE tab what hardware

[alb03]

HI, First Thanks for the guide. I use your tigerlake efi folder but still get error on my Asus Zepherus M16 GU603HM 2021.
i9 core 11900H.

This is the error
ACPI Error [_SB_.PC00.XHCI.RHUB.HS14] Name space lookup failure, Ae_NOT_FOUND

ACPI Error [_SB_.PR00] Name space lookup failure, Ae_NOT_FOUND

ACPI Error [_SB_.PC00.LPCB.EC0.HS14] Name space lookup failure, Ae_NOT_FOUND 
etc....

Can i get a fix ? Thank you. 

I try to use my own SSDT without success. I use SSDT TIME Master to dump and get  SSDT-USB-RESET.aml file.
This file is supposed to disable any RHUB. But Still get error. I created my own RHUB.aml file But still get error.

I also map my usb port with usbToolbox.

I will appreciate your help maybe an updated efi folder ?. Thanks.

Edited May 5, 2023 by alb03
Adding more information

[MaLd0n]

Bro

IGPU tiger lake dont have support on macos. Not good for this.

[alb03]

Thank you

[Guest]

GTX 1050 supported with Hackintosh? If yes, how can I enable it? Because hackintosh detects Intel HD Graphics 630 card instead of NVIDIA GeForce GTX 1050

[MaLd0n]

On 5/14/2023 at 1:37 AM, sam99eer said:

GTX 1050 supported with Hackintosh?

High Sierra only. After this version u need use OCLP.

[Guest]

20 hours ago, MaLd0n said:

High Sierra only. After this version u need use OCLP.

Thanks for reply @MaLd0n sir. Would you mind guiding me the steps to do or any guide link for this?

[Lysed-A]

Been trying to install Ventura on my Dell Optiplex 7070 SFF using opencore with no success.

Stops at COLLECTION UUID MATCHES WITH LOADED KCS

 

SPECS

Intel Core i5 - 9500

32GB DDR 4 RAM

512GB SSD

[MaLd0n]

28 minutes ago, Lysed-A said:

Been trying to install Ventura on my Dell Optiplex 7070 SFF using opencore with no success.

https://www.transfernow.net/dl/20230518vyDUiZ0a

[Guest]

Hi @MaLd0n Sir, I hope you are doing good. Sorry for disturbing you.
Here is the google drive link of dump file made by RunMe app
https://drive.google.com/file/d/1FHBEpjqFFE3WSvuPHIXTI0tOAxQAgogA/view?usp=sharing

Things not working -
Bluetooth
Trackpad (USB Mouse working but laptop trackpad not working)
Graphic Card (Intel card working but Nvidia GeForce GTX 1050 not working)
Wifi
Sound (Sound working but Dolby sound not working, voice is very low even on full volume)

It would be a great help for me if anything fix

And thank you so much for your efforts

Edited May 25, 2023 by sam99eer
Ethernet is working, tried with different cable

[Lysed-A]

On 5/18/2023 at 2:31 PM, MaLd0n said:

https://www.transfernow.net/dl/20230518vyDUiZ0a

Thanks so much for your help. This worked perfectly for installation. However I only get 7mb graphics memory.

Using UHD 630 iGPU. Please is there anything I can do to improve this?

Thanks in advance

[MaLd0n]

5 hours ago, Lysed-A said:

Thanks so much for your help. This worked perfectly for installation. However I only get 7mb graphics memory.

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md

[Lysed-A]

19 hours ago, MaLd0n said:

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md

Giving up on this. Have spent more than 15 hours trying to get it to work. Nothing seems to be working. Even used a fresh download of opencore, created the efi according to instructions but display does not work without -igfxvesa. When i use -igfxvesa, i only get 7mb

 

[vibhor.x]

i have two USB ports and both are USB 3.0. i disable secure boot and then i booted with my usb . i reseted nvram and then entered into mac recovery but nothing really happened . it showed deplaying text console in 10 seconds and then i come back to the same menu. btw i have HP Pavillion laptop . Hp laptop doesnt have much settings in BIOS to change just fyi. what to do.??

[lunatic71]

None of my internal drives are showing up when I try to install mac os to the laptop.

When im trying to install Mac OS Vetura in the macos installer my internal drives arent showing up

[Guest]

6 hours ago, lunatic71 said:

None of my internal drives are showing up when I try to install mac os to the laptop.

When im trying to install Mac OS Vetura in the macos installer my internal drives arent showing up

Select Disk Utility
Click on Icon with Dropdown present on left side of "Disk Utility" heading
Select "Show All Devices"
All the connected disks will be then visible

[De Wet]

Hey I think my ventura image is broken cuz I can't get installed, it starts copying to the drive at 13 to 12 mins and then the setup just closes

[MaLd0n]

U need a updated Lilu

Lilu.kext.zip

[De Wet]

I see, I got it fixed, can you please patch my dsdt, I'm not sure where to post it anymore because it has so many discussions on it, but my sound card isn't working, its a Realtek dell optiplex sound card, I'm using a optiplex 5060

here is the dsdt:  

https://drive.google.com/file/d/1jxtUMW17P5mZBIC-NpU9tpcUZU4999g6/view?usp=sharing

[Alcir]

I'm stuck.

https://photos.app.goo.gl/mYbc4pyRwccVqcZG8

[xxnguyeeneeen]

i can't connect to the WIFI...
hp 348 g7 with realtek rtl8822ce 802.11ac pcie ... i also have a usb wifi: tplink wn83n model but i can't find anything...

[Alcir]

On 6/5/2023 at 10:11 AM, Alcir said:

I'm stuck.

https://photos.app.goo.gl/mYbc4pyRwccVqcZG8

I think my UEFI may be incompatible.

[ru379]

Hi, I have a doubt about the usb mapping. When I mapped all the ports and they are working as expected, do I have to remap them again when I do a clean install of another version of macOS? For example if I'm using monterey with ports mapped but i do a clean install of ventura erasing the ssd.

[MaLd0n]

10 minutes ago, ru379 said:

Hi

Hi. No. Remap is same.