HACKINTOSH bigsur Z390M GAMING, I7 9TH COFFELAKE + AMD RADEON HD5450 (ERRO)

Q: What is a Hackintosh?

A non-Apple computer configured to run macOS using compatible PC hardware combined with a custom bootloader and configuration files to emulate a real Mac environment.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA). It is generally not illegal for personal experimentation but not permitted for commercial use.

Q: What hardware is best for a Hackintosh?

The best hardware closely matches real Apple systems, with Intel CPUs (6th Gen to Core Ultra), AMD Radeon GPUs, compatible chipsets, and Intel-based Wi-Fi cards offering higher success rates.

Q: Can I build a Hackintosh with an AMD CPU?

Yes, macOS can run on AMD Ryzen CPUs using kernel patches, but Intel CPUs provide better native compatibility.

Q: What is OpenCore?

OpenCore is a modern Hackintosh bootloader that provides near-native macOS behavior and is the recommended bootloader for new installations.

Q: Is Clover still supported?

Yes, Clover is still supported but less recommended compared to OpenCore for modern systems.

Q: Which macOS versions support Hackintosh?

Hackintosh systems support macOS versions from Leopard up to recent releases, depending on hardware compatibility.

Q: Do NVIDIA graphics cards work on Hackintosh?

Only older NVIDIA GPUs work on older macOS versions; modern NVIDIA GPUs are incompatible with current macOS releases due to lack of driver support.

Q: What is an EFI folder?

The EFI folder contains the bootloader, drivers, kexts, and configuration files required to boot macOS on a Hackintosh.

Q: What are kexts?

Kexts (kernel extensions) are drivers that enable hardware functionality such as audio, Ethernet, USB, and graphics.

guilherme migliorelli · September 20, 2021

Fala pessoal, estou enfrentando algumas dificuldades para estar instalalando meu hackintosh.

Depois de baixar a imagem e criar o pendriver bootavel > quando termino de configurar a bios para receber o pendrive e salvar as configs e reiniciar

quando ele reinicializa ele volta chuviscando e só volta ao normal se eu resetar a bios tirando a pilha(bateria).

já configurei a bios de 3 formas diferentes e nenhum sucesso... será alguma incompatibilidade do hardware ?

CPU - Z390 M GAMING
CHIPSET - I7 9TH COFFELAKE
GPU - AMD RADEON HD5450
PLACA DE REDE INTEL

-----

Type: iMac19,1
Serial: C02DT0V0JV3Q
Board Serial: C020501084NLNV9JC
SmUUID: 39846A2A-1F9D-4B0B-9B28-20E7BB8C1E62
Apple ROM: 6C40085C3190

mais tarde posto as fotos e atualizo se tiver sucesso ?

MaLd0n · September 20, 2021

última versão de bios/uefi

bios/uefi em default e desativa apenas o csm

altere somente o necessário

essa sua placa de vídeo perdeu suporte. vc vai ter de fazer uma gambiarra se quiser usar os sistemas mais recentes

guilherme migliorelli · September 20, 2021

resetei a bios novamente > load optmized defaults > disable CSM > save and reboot

mas ligou chuviscando dnv

qual placa você indicaria custo beneficio e que rodaria bem com minhas configs ? pretendo rodar o BIG SUR e futuramente o monterey

MaLd0n · September 20, 2021

RX560 powercolor

guilherme migliorelli · September 20, 2021

Eu preciso encontrar essa placa de video na ponta entrega aqui, pq estou viajando essa seman e já vou levar a máquina pronta montada pra utilizar nos serviços que vou fazer de audio e video...

tem mais alguma placa indicada pro i7 coffelake ? a linha rx 500 ? mais alguma outra ?

MaLd0n · September 20, 2021

pra edição de vídeo não

rx560+

guilherme migliorelli · September 20, 2021

devolvi a placa que tinha comprado, vou tentar fazer o hackintosh com placa integrada onboard até comprar a rx570 ou 580...

prossegui aqui a instalação baixei a imagem, criei o pendrive bootavel pelo balena, fiz as configs na bios salvei e reiniciei

começa o procedimento os códigos começam a ser executados mas no meio do processo o código parece dar algum conflito e fica com um simbolo de bloqueio no meio

MaLd0n · September 20, 2021

use uma porta usb 2

https://www.olarila.com/topic/15040-opencore-vanilla-guide-2021-folder-for-chipsets-monterey-ready-desktop-and-notebook/

guilherme migliorelli · September 21, 2021

O cliente me pediu o hackintosh mojave, já preparei o pendrive

estou fazendo gpu onboard msm, não sei se configurei o config.plist errado, da erro depois do verbose boot

aparece o logo da maça carrega a barrinha e fica na tela preta

4 hours ago, MaLd0n said:

use uma porta usb 2

https://www.olarila.com/topic/15040-opencore-vanilla-guide-2021-folder-for-chipsets-monterey-ready-desktop-and-notebook/

já baixei as kexts tudo certinho, acho que o problema é na NVRAM > quirk > bootargs

guilherme migliorelli · September 21, 2021

11 hours ago, guilherme migliorelli said:

O cliente me pediu o hackintosh mojave, já preparei o pendrive

estou fazendo gpu onboard msm, não sei se configurei o config.plist errado, da erro depois do verbose boot

aparece o logo da maça carrega a barrinha e fica na tela preta

já baixei as kexts tudo certinho, acho que o problema é na NVRAM > quirk > bootargs

Já corrigi o bootargs na aba de NVRAM, porém ainda constam alguns erros no sanity checker

como n tinha a opção pra versão 0,7,3 no sanity checker usei a 0,6,6

no relatório da config.plist diz que está faltando os drivers openruntime.exe e Hfsplus.exe

mas estão sim na pasta de drivers...

OpenCore v0.6.6 Intel Coffee Lake Sanity Check

https://non-vanilla-way.github.io/OpenCore-Install-Guide/config.plist/coffee-lake.html

# BASE EFI INTEL 9th - COFFEE LAKE REFRESH - RELEASE Version this shouldn't be here
# BY: https://luchina.com.br this shouldn't be here

ACPI

Add

SSDT-AWAC.aml Make sure this file is in your OC/ACPI directory
SSDT-EC-USBX-DESKTOP.aml Make sure this file is in your OC/ACPI directory
SSDT-PLUG-DRTNIA.aml Make sure this file is in your OC/ACPI directory
SSDT-PMC.aml Make sure this file is in your OC/ACPI directory

Delete

Patch

Quirks

FadtEnableReset = No
NormalizeHeaders = No
RebaseRegions = No
ResetHwSig = No
ResetLogoStatus = Yes

Booter

MmioWhitelist

Patch

Quirks

AllowRelocationBlock = No
AvoidRuntimeDefrag = Yes
DevirtualiseMmio = Yes
DisableSingleUser = No
DisableVariableWrite = No
DiscardHibernateMap = No
EnableSafeModeSlide = Yes
EnableWriteUnprotector = No
ForceExitBootServices = No
ProtectMemoryRegions = No
ProtectSecureBoot = No
ProtectUefiServices = Yes
ProvideCustomSlide = Yes
ProvideMaxSlide = 0
RebuildAppleMemoryMap = Yes
SetupVirtualMap = Yes
SignalAppleOS = No
SyncRuntimePermissions = Yes

DeviceProperties

Add

AAPL,ig-platform-id = 07009b3e iGPU set correctly

Delete

Kernel

Add

Lilu.kext make sure this Kext is in your OC/Kexts directory and the first kext listed here
AirportItlwm.kext make sure this Kext is in your OC/Kexts directory
IntelBluetoothFirmware.kext make sure this Kext is in your OC/Kexts directory
IntelMausi.kext make sure this Kext is in your OC/Kexts directory
NVMeFix.kext make sure this Kext is in your OC/Kexts directory
VirtualSMC.kext make sure this Kext is in your OC/Kexts directory
WhateverGreen.kext make sure this Kext is in your OC/Kexts directory
AppleALC.kext make sure this Kext is in your OC/Kexts directory
SMCProcessor.kext make sure this Kext is in your OC/Kexts directory
SMCSuperIO.kext make sure this Kext is in your OC/Kexts directory

Block

Emulate

DummyPowerManagement = No

Force

Patch

Quirks

AppleCpuPmCfgLock = No
AppleXcpmCfgLock = Yes You should disable CFG-Lock in your bios instead of using this
AppleXcpmExtraMsrs = No
AppleXcpmForceBoost = No
CustomSMBIOSGuid = No If you have a Dell or VIAO motherboard, please enable this
DisableIoMapper = Yes
DisableRtcChecksum = No
ExtendBTFeatureFlags = No
LegacyCommpage = No
ExternalDiskIcons = No
ForceSecureBootScheme = No
IncreasePciBarSize = No
LapicKernelPanic = No If you have an HP laptop, please enable this
PanicNoKextDump = Yes
PowerTimeoutKernelPanic = Yes
SetApfsTrimTimeout = -1
ThirdPartyDrives = No
XhciPortLimit = Yes turn off after USB port mapping

Scheme

Misc

BlessOverride

Boot

ConsoleAttributes = 0
PollAppleHotKeys = No
ShowPicker = Yes
TakeoffDelay = 0
HibernateMode = None
LauncherOption = Disabled LauncherOption set correctly
LauncherPath = Default
PickerMode = Builtin
HideAuxiliary = No
PickerAttributes = 17
PickerAudioAssist = No
Timeout = 5
PickerVariant = Auto

Debug

AppleDebug = Yes
ApplePanic = Yes
DisableWatchDog = Yes
Target = 67
DisplayLevel see Debugging Docs for more info debug display levels
DisplayDelay = 0

Entries

Security

AllowNvramReset = Yes
AllowSetDefault = Yes
ApECID = 0
AuthRestart = No
BlacklistAppleUpdate = Yes
DmgLoading = Signed
EnablePassword = No
Vault = Optional
SecureBootModel = Default SecureBootModel set correctly
HaltLevel = 2147483648
ExposeSensitiveData = 15
ScanPolicy = 0

Tools

You removed the tool EFIs

NVRAM

LegacyEnable = No
LegacyOverwrite = No
WriteFlash = Yes

Add

UIScale = 01
DefaultBackgroundColor = 00000000
boot-args = alcid=1 -wegnoegpu
run-efi-updater = No
csr-active-config = 00000000
prev-lang:kbd = pt-BR:128 (pt-BR:128)
SystemAudioVolume = 46

Delete

LegacySchema

PlatformInfo

Automatic = Yes
UpdateDataHub = Yes
UpdateNVRAM = Yes
UpdateSMBIOS = Yes
UpdateSMBIOSMode = Create If you have a Dell or VIAO motherboard, please set this to Custom

CustomMemory

Generic

SpoofVendor = Yes
AdviseWindows is missing. Normally set to No
ProcessorType = 0
SystemMemoryStatus = Auto
MaxBIOSVersion = No
SystemProductName = iMac19,1
MLB is set
ROM is set
SystemSerialNumber is set
SystemUUID is set

UseRawUuidEncoding

UEFI

ConnectDrivers = Yes

Drivers

Need either VBoxHfs.efi, OpenHfsPlus.efi or HfsPlus.efi here
OpenRuntime.efi is missing
Array
Array
Array
Array
Array
Array
Array

APFS

EnableJumpstart = Yes
GlobalConnect = No If you have an HP motherboard and can't see APFS drives in OpenCore, please enable this
HideVerbose = Yes
JumpstartHotPlug = No
MinDate = -1 but should normally be 0
MinVersion = -1 but should normally be 0

AppleInput

Audio

AudioSupport = No
AudioDevice = PciRoot(0x0)/Pci(0x1b,0x0)
AudioCodec = 0
AudioOut = 0
MinimumVolume = 20
PlayChime = Auto
VolumeAmplifier = 0
SetupDelay = 0

Input

KeyFiltering = No
KeyForgetThreshold = 5
KeyMergeThreshold is missing. Normally set to 2
KeySupport = Yes
KeySupportMode = Auto
KeySwap = No
PointerSupport = No
PointerSupportMode = ASUS
TimerResolution = 50000

Output

You should have exactly 12 settings in the UEFI/Output section
TextRenderer = BuiltinGraphics
ConsoleMode = -blank-
Resolution = Max
ForceResolution = No
ClearScreenOnModeSwitch = No
IgnoreTextInGraphics = No
ProvideConsoleGop = Yes
DirectGopRendering = No
ReconnectOnResChange = No
ReplaceTabWithSpace = No
SanitiseClearScreen = No
UgaPassThrough = No

ProtocolOverrides

You should have exactly 18 settings in the UEFI/ProtocolOverrides section
AppleAudio = No
AppleBootPolicy = No
AppleDebugLog = No
AppleEvent is missing. Normally set to No
AppleFramebufferInfo = No
AppleImageConversion = No
AppleImg4Verification = No
AppleKeyMap = No
AppleRtcRam = No
AppleSecureBoot = No
AppleSmcIo = No
AppleUserInterfaceTheme = No
DataHub = No
DeviceProperties = No
FirmwareVolume = Yes This is only required if you plan to use FileVault
HashServices = No If you plan to use FileVault2, please enable this
OSInfo = No
UnicodeCollation = No

Quirks

DisableSecurityPolicy = No If you have a Microsoft Surface device, please enable this
ExitBootServicesDelay = 0
IgnoreInvalidFlexRatio = No
ReleaseUsbOwnership = No
RequestBootVarRouting = Yes
TscSyncTimeout = 0
UnblockFsConnect = No If you have an HP system, please enable this

ReservedMemory

MaLd0n · September 21, 2021

use a nossa pasta efi e altere o smbios e aplique patch de vídeo

guilherme migliorelli · September 24, 2021

On 9/21/2021 at 1:52 PM, MaLd0n said:

use a nossa pasta efi e altere o smbios e aplique patch de vídeo

certo, eu estou baixando a imagem do mac pelo macrecovery pelo cmd

Já fiz varias versões para tentar bootar uma deu certo no opencore 0.6.6

mas no opencore 0.7.3 ele reconhece no computador abre o menu do opencore só que quando seleciono mojave.dmg

carrega e barrinha da apple e da tela preta já alterei as config.plist e nd, mas no opencore 0.6.6 ele da boot > instala mas dps que finaliza a instalação eu seleciono macinstaller pelo ssd carrega tudo mas sempre volta pro menu inicial de instalação

pra reinstallar o macos, ou disk utility e mais 2 opções

eu formatei o ssd que iria receber o macOS, renomeei para macOS > AFPS - GUID

Sign In

HACKINTOSH bigsur Z390M GAMING, I7 9TH COFFELAKE + AMD RADEON HD5450 (ERRO)

Recommended Posts

OpenCore v0.6.6 Intel Coffee Lake Sanity Check

ACPI

Add

Delete

Patch

Quirks

Booter

MmioWhitelist

Patch

Quirks

DeviceProperties

Add

Delete

Kernel

Add

Block

Emulate

Force

Patch

Quirks

Scheme

Misc

BlessOverride

Boot

Debug

Entries

Security

Tools

NVRAM

Add

Delete

LegacySchema

PlatformInfo

CustomMemory

Generic

UseRawUuidEncoding

UEFI

Drivers

APFS

AppleInput

Audio

Input

Output

ProtocolOverrides

Quirks

ReservedMemory

Create an account or sign in to comment

Create an account

Sign in