Rampage III Extreme Wake issue

[lucke77]

Hello, guys!

My system:

Mac OS X 10.8.2

Asus Rampage III Extreme

i7 950 3.07 Ghz

2x nVidia GTX 470 (SLI in Win7)

ALC 889 - multishit

DSDT (patched with DSDT Editor - no errors, no warnings)

only kexts installed: AACPIPlatform Rollback, FakeSMC, patched 10.7.4 AppleHDA.kext

Everything is OK and works, except sleep:

I removed the prw method of usb in dsdt, now the usb wake ok.

System wake up to 99% ...

The system goes into auto-sleep only: darkwake=0.

HWMonitor bar shows 12% cpu speedstep ...

The mouse moves, keyboard ok, but Pointer remains rainbow wheel ...?

I do not know if it is an issue with cpu (speedstep) or a missing patch in dsdt ...

Attached my DSDT.aml below

DSDT.aml.zip

I would appreciate some advice ...

Thanks!

[pmdsp]

I removed the prw method of usb in dsdt, now the usb wake ok.

System wake up to 99% ...

The system goes into auto-sleep only: darkwake=0.

HWMonitor bar shows 12% cpu speedstep ...

The mouse moves, keyboard ok, but Pointer remains rainbow wheel

 

I don't understand that part. Refer to this link http://Olarila.com/forum/viewtopic.php?f=19&t=634

No powermanagement = no sleep. Attach the untouched DSDT.

[lucke77]

Sorry, probably my bad english.

System goes to sleep well with Stop in apple menù, and auto sleep working properly with darkwake=no in org.chameleon.

The principal problem is wake. Because monitor, usb (keyboard, mouse, etc..) and sata disk turns on, but The system freezing. I have to restart by pressing reset.

For powermanagement, in console i have:

kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1112

kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete

kernel[0]: AppleIntelCPUPowerManagementClient: ready

In dsdt i removed _PRW method from: UHC & EHCI, and now usb wake on, but I have this in console:

[0xffffff801990f400] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0x1a000000)

[0xffffff801990f400] The IOUSBFamily was not able to enumerate a device.

For wake reason:

kernel[0]: Wake reason =

kernel[0]: USB (EHCI):Port 2 on bus 0xfa connected or disconnected: portSC(0x101803)

kernel[0]: An Unknown USB Device (Port 2 of Hub at 0x1a000000), may have caused a wake by being connected

The link you posted...

I tried to follow yet...

My untouched DSDT:

Rampage III Extreme.dsl.zip

 

Thanks in advance pmdsp!

[lucke77]

I discovered that the freeze after wake (main problem) are related precisely to wake up the sata disks... USB and LAN wake up properly...

DSDT patch?