Post install

[artur-pt]

After installing OS X, you must take the following steps:

* - Install the boot loader (Clover or Chameleon)

Clover

http://Olarila.com/forum/viewtopic.php?f=28&t=3198

Chameleon (you can use the installer pkg or Chameleon Wizard)

Installer (pkg)

http://Olarila.com/forum/viewtopic.php?f=9&t=70

Chameleon Wizard

http://www.insanelymac.com/forum/topic/257464-chameleon-wizard-utility-for-chameleon/

Even if you install from pkg, you can still use the Wizard to configure boot options (org.chameleon.Boot) and SMBIOS.

Install FakeSMC.kext (mandatory) and NullCPUPowerManagement.kext (until you fix power management)

Use Kext Wizard to install kexts (/System/Library/Extensions)

http://www.insanelymac.com/forum/topic/253395-kext-wizard-easy-to-use-kext-installer-and-more/

or

http://www.insanelymac.com/forum/topic/140647-latest-kext-utility-mavericks-super-speed-edition/

* - Find the kexts needed for sound, lan, keyboard, mouse, trackpad

http://Olarila.com/forum/viewtopic.php?f=18&t=1694

http://Olarila.com/forum/viewtopic.php?f=18&t=454

http://Olarila.com/forum/viewtopic.php?f=28&t=3224

* - Video

ATI

http://Olarila.com/forum/viewtopic.php?f=18&t=736

nVidia

http://Olarila.com/forum/viewtopic.php?f=18&t=154

Intel

HD 3000 http://Olarila.com/forum/viewtopic.php?f=18&t=2193

HD 4000 http://Olarila.com/forum/viewtopic.php?f=28&t=3111

* - Advanced configurations

Power management

http://Olarila.com/forum/viewtopic.php?f=18&t=1703

DSDT

http://Olarila.com/forum/viewtopic.php?f=19&t=634

AppleHDA

http://Olarila.com/forum/viewtopic.php?f=28&t=2676

[ferroca]

sorry for my sily question how to get ''DSDT.aml' ''smbios.plist'' and third file. U have specified how to generate but where will this files be generated. sorry newbie here. kindly help.

[artur-pt]

hi

i don't understand u question ?

U have specified how to generate but where will this files be generated.

if u use chameleon wizard to generate the files, and is to save in Extra folder in the hd root /

forget dsdt.aml

if u don't know how to do the other 2 forget dsdt.aml

good hack

[ferroca]

hi

i don't understand u question ?

U have specified how to generate but where will this files be generated.

if u use chameleon wizard to generate the files, and is to save in Extra folder in the hd root /

forget dsdt.aml

if u don't know how to do the other 2 forget dsdt.aml

good hack

 

My question is I am not getting the org.chameleon.boot.plist and smbios.plist

How to generate it?

Any video tutorial to show this steps?

[artur-pt]

hi

see this that have extra folders

iMac9,1 / Core2Duo

Anexo:

Extra iMac9,1.zip [343.57 KiB]

Baixado 262 vezes

iMac11,1 / Core i 1156

Anexo:

Extra iMac11,1.zip [342.27 KiB]

Baixado 136 vezes

MacPro3,1 / Core2Quad

Anexo:

Extra MacPro3,1.zip [343.58 KiB]

Baixado 235 vezes

MacPro4,1 / Core i 1366

Anexo:

Extra MacPro4,1.zip [343.57 KiB]

Baixado 113 vezes

MacBook4,1 / Core2Duo Mobile

Anexo:

Extra MacBook4,1.zip [467.6 KiB]

Baixado 110 vezes

MacBookPro6,1 / Core i Mobile

Anexo:

Extra MacBookPro6,1.zip [466.95 KiB]

Baixado 188 vezes

http://Olarila.com/forum/viewtopic.php?f=3&t=108

good hack

[jeet92]

Hey,

After installation of OS X, I am having issues installing anything to manage my kexts. when i try installing kext manager, it tells me "Kext Wizard" cannot be opened because it is from an unidentified publisher. What do I do?

Figured it out. Sorry for the premature question.

[chart]

hai,

i want install hackintosh, lion 10.7.5

and i have issue on register, and into back to options keyboard layout

alwasy into back. simple i can't see my desktop mac....

http://www.freeimagehosting.net/n3ep4

http://www.freeimagehosting.net/rgvmw

i think issue, couse trouble in my gpu n monitor no good working

vga ati hd 5550 and monitor acer

so, i try add kext, but i add with transmac (running windows7) i replace it kext(drag n drop)

but i have new problem

http://www.freeimagehosting.net/9nziw

and i try erase kext, but still problem same as the picture above

question, can i use kext utility in running windows, or boot?

or u can help, for fix issue...

(dont have mac os running, just windows).

this installer http://Olarila.com/forum/viewtopic.php?f=17&t=2194

i use hadware...

mb ga-ep35-ds3p

prosesor intel core2duo

vga ati hd 5550

hdd 2x500gb seagat*

keybord n mouse wireless

monitor acer

[artur-pt]

hello

abou graphics..

have u try to boot with

-v GraphicsEnabler=No

if u try that and no way, only delete from installer ati5000controller.kext, and boot

-f -v GraphicsEnabler=No

and install the system

and use a mouse and keyboard usb , turn the install simple...

after install

http://Olarila.com/forum/viewtopic.php?f=18&t=736

http://Olarila.com/forum/viewtopic.php?f=27&t=1716

good hack

[chart]

i miss understand about chameleon wizard...

why i can't run chameleon wizard installer(in windows)?

can i do change chameleon wizard to image fdd for run in boot?

or

can u give installer recommended for my pc??

tired this issue..

_thank_

[chart]

hai

i need someone to help me.

i use any motode n any forum(use -v -f, graphics mode, any boot,,etc)

but still problem in nano second up time...

just moment i look my ide setting on bios has change to ch0m, normaly is scsi0 mode

what metode to back ?

_thank_

[artur-pt]

hello

remove from the installer ati5000controller.kext and boot

-f -v

posta photo of the boot

good hack

[zsolt.molnarrr]

Hello there!

My setup is: Acer 7750G, Intel Core i7(2Ghz), 4Gb DDR3 ram, Intel HD3000 + AMD Radeon HD 6650M(2Gb), Athereos WLan+Lan, Realtek Sound etc...

I'm stuck with the installation of Chameleon, please help me!

It's installed and I've already fixed boot0:error but my problem is that it skipps the boot GUI where I could choose boot partition and always boots Windows8.

I've tried to edit org.cham.bootplist with Chameleon Wizard, but it didn't had default boot partition enabled so I couldn't fix by just clicking on the checkbox. (GUI is enabled, timeout is disabled). So the only thing I can see is "boot0:done" and windows flag.

Any suggestions are appriciated!

Regards,

Zsolt

[artur-pt]

hello

the chameleon is wrong installed

try the option in chameleon wizard

boot0md

good hack

[zsolt.molnarrr]

Reinstalled Chameleon in that mode but it still does the same

(Hint: I had to install easybeast to have a org.chameleon.boot file, chameleon reinstallations also don`t replaced/modified that file, so the problem might be that it just doesnt use it. I hope this helps you to help me.

[zsolt.molnarrr]

Bump:(

[artur-pt]

hello

i don't know what u have use to install the system..

use one of our images .. and methods to install.. if u use other methods.. no support here

like the " beast thing " or other things.. it have they sites.. so seek help there

good hack

[zsolt.molnarrr]

I installed OSX from this guide: http://www.Olarila.com/forum/viewtopic.php?f=27&t=3101

Than I installed a Disk driver from easybeast to solve boot0:error (cause nothing else did help), but I didn't know that this might cause incompatibility. Shall I remove it somehow?

Do you know any other decent methods to handle boot0:error problem? (I have one HDD in my laptop with win8+shared_media+osx partitions.)

(Also I didn't know that installing stuff from other sites is forbidden/unsupported, sorry for that, as you can see I'm a noob.)

[artur-pt]

hello

http://Olarila.com/forum/viewtopic.php?f=28&t=1676

try to do it the right way again

good hack

[CosmoHack]

Hello,

I have just installed Mountain Lion 10.8.4 with the Olarila's USB image.

My goal is to have a dual boot including Windows 7 and Mac OS X, so I followed this tutorial to do so:

https://www.dropbox.com/s/djt18o0k8288yzp/Guide%20with%20Pictures.pdf

Essentially, what the tutorial says and what I have done is this:

1. Boot from USB to Mac OS X installer.

2. Go to Disk Utilities and set 2 partition scheme:

• Mac OS X (HFS+ Journaled)

• Windows 7 (MS FAT)

I also added a new MS FAT partition in order to store data, not another OS. So I selected a 3 partition scheme.

3. Turn off and install Windows 7 in the partition already created.

4. Install Windows 7 drivers (while I think that this is optional in this stage).

5. Turn off and boot the Mac OS X installer from the USB.

6. Install Mac OS X in the Mac OS X partition already created.

7. Run the already installed Mac OS X in the HD by using the bootloader that automatically starts with the USB thumb.

8. Download multishit and install all new drivers (but it doesn't install Chameleon from multishit).

In this point, the guide says that in the next reboot you won't need to boot from the USB, since Chameleon will run from the HD and you will be able to select which OS to boot.

To check it, I reboot my computer and Chameleon doesn't run, and when I say it doesn't run I don't mean it only appears for a little time: it just doesn't start. So the chain is: Turn On -> POST -> Windows 7, as Windows 7 loads just after the POST. Not Chameleon anywhere.

Then, I think that a manual installation would be good so I boot Mac OS X from the USB thumb, download the latest Chameleon and installed it (in a very Windowish way: "next-next-next..", as I have seen in some tutorials).

To check if it works, I reboot again and... no Chameleon at all: Turn On -> POST -> Windows 7 again.

The same thing ocurrs with other versions of Chameleon (including the multishit version), Chimera and Clover. Also tried to install Chameleon on Windows and, of course, didn't work.

I must say that, in the point 2 (partitions), the guide claims for a GUID scheme. I tried it with GUID and also from MBR, both from scratch, with the same results.

Any idea?

P.S: I post this here because artur_pt linked me here, I hope this is not wrong.

Thanks!

[koske]

I need a little help

Firstly, why when I reset OS X 10.8.5 reset and BIOS. Do we need a kekt?

Secondly, where can I find drivers for NVidia GeForce 9800 GT 1024MB. Or does anyone have.

Thank you.

[crusher]

I need a little help

Firstly, why when I reset OS X 10.8.5 reset and BIOS. Do we need a kekt?

Secondly, where can I find drivers for NVidia GeForce 9800 GT 1024MB. Or does anyone have.

Thank you.

 

No you do not need a kext,if you already have adequate.

From your graphic card use OSX86 Tool apps and use a strings from your card!

From this link:https://code.google.com/p/osx86tools/downloads/detail?name=OSX86Tools_1.0.150.zip&can=2&q=

[PimentelX86]

Hello

Only to fix some things.

Firstly, why when I reset OS X 10.8.5 reset and BIOS. Do we need a kekt?

You need patch your DSDT with Reset CMOS patch, will be fix this problem.

Secondly, where can I find drivers for NVidia GeForce 9800 GT 1024MB. Or does anyone have.

All kext are in OSX inside S/L/E folder.

You need active it. GraphicsEnabler=Yes in org.chameleon... manually or with Chameleon Wizard app.

[koske]

can you describe to me the process step by step.

15-20 times I installed and surely wrong somewhere in the bootloader, will not even boot when you remove the USB drive and let it boot from the HD. I have a 19'' monitor resolution is 1440x900, my current resolution is 1024x768, and I have the option to choose.

My spec is as follows

gaep45-DS4

8gb kingston

9800gt 1024mb ddr3

quad ćore2@2.4ghz

thanks in advance.

[PimentelX86]

Hello.

1st - You need install the bootloader in your HDD

To beginners i always recommend Chameleon.

Oficial donwload: http://www.insanelymac.com/forum/files/file/59-chameleon-22-svn/

2nd - You need adjust OSX to work 100% in your hardware.

All things that you need know, you can find here.

Read carefully and understand.

[labeebahmad32]

i have hp 1000 1140TU core i3 2.39 GHz. Intel HD 3000. I cannot manage grafics. After i install kext from Olarila's kexts, my installation get corrupted or i don't know what to say. I have to boot from usb again and install os x again. mavericks. I installed audio and ethernet kexts successfully but cannot install graphics kexts. display is 1366x768.