lukakeiton

Updated to beta 7 as normal.

All I can say, on my ryzen pc, sleep/wake works only on big sur! Apple is doing really good things.

- It is a future proyect. I am on others now. - Did you add -wegnoegpu in boot args? As @MaLd0n said, you need to patch it again. If you are going to use opencore, i suggest you use ssdt.

I took a look to your DSDT, it is not patched at all (DSDT is full solution unless bios update). So, you are using SSDTs or Clover config, but I don't use Clover for years. I suggest you if my configuration works for you, use it! Change serial number and add the kexts you need.

You need to extract it with OpenCore or windows, then you have to disassembly it. Then patch it and assembly again. For your specs, DSDT is not needed. If you are interested on Big Sur, take a look on this!

I generate my own DSDT, for me it works. Have you installed the modded bios? I use OpenCore. Your DSDT is not the same as mine.

Uploaded on OP.

I decided to give a second life to this laptop and successfully installed macOS Catalina 10.15.6 Specs - Intel Core i7-2630QM 2GHz - 8192MB DDR3 RAM - 500GB SATA SSD (MacOS Catalina) - 64GB SATA SSD (Windows 10) - DVD-RAM/±R/±RW - 17.3" TFT - AMD Radeon HD 6650M 2048MB and Intel HD 3000 512MB - Atheros Gigabit Ethernet - Webcam EFI Folder Download here Notes: - Laptop has a modded bios, with UEFI capabilities. - OpenCore Legacy installed (USB and SSD). - Use this to make Intel HD 3000 work with DSDT patch. - SMCBatteryManager works fine and shows percentage correctly. - SMCLightSensor works fine allowing bright control - Use this guide to remap fn keys allowing brightness control (_Q11 and _Q12). - I created my own patched DSDT (USBs, graphic card, battery). - Use 12 ALC layout (injected in DSDT). - Kexts used: Lilu, WEG, AppleALC, VoodooPS2, CPUFriend, VirtualSMC (remove SMCDellSensor), mXHCD and AtherosL1cEthernet. - HDMI and VGA output don't work and they will not. - At this moment, I am waiting for a Broadcom BCM94352HMB for bluetooth and wifi. - OpenCore doesn't support booting from legacy Windows, so to boot it press F12 (boot menu) while memory test. Installation Flash the modded bios in Windows. Download here. FLASHING YOUR BIOS ALWAYS IS RISKY. I AM NOT RESPONSIBLE OF NOTHING RELATED WITH FLASHING BIOS. Apply these bios settings: Create your USB installer no matter the method. Then, apply BootInstall.command to your USB. Copy. my EFI folder to EFI partition (USB), it will also have a boot file, do not remove it. Post-Installation Install MacOS as normal. Apply BootInstall.command to your HDD/SSD. Then, copy my EFI folder to EFI partition (HDD/SSD). Install intel HD 3000 patch provided. Reboot. Images

Enjoy!

Updated to Beta 6 as normal.

Updated to Beta 6 without problems. Still having sleep/wake working.

Not working for me. Trying this now. Edit: I have downloaded without any problem. Installing now. Edit 2: Installed without problems.

I am not a lucky guy...

FINAL UPDATE I get sleep/wake work, it takes 30 seconds to go to sleep. I have made next changes: - Remove bluetooth (4.0 version) from usb 2.0 connector. - Fix USB map, SSDT and kext. - Add Intel bluetooth kexts (5.0 version). Source from here Updated EFI on OP. Now, everything works like a real Mac Thank you very much to @MaLd0n for introducing me in the ACPI world and sending me the ACPI manual.

There is one SSDT wrong, when renaming _SB.PCI0.GPP0.D004 to ANS1, it is not a 4 (my big mistake), it is a 5. The correct path is _SB.PCI0.GPP0.D005. I upload the new SSDT: SSDT-X570-NVMe-ANS1-GPP0-noTB.aml I am going to create ethernet ssdt because I want to stay clean in OpenCore device properties.

Updated EFI with SSDTs, updated kexts and OpenCore 0.6.1 debug version. Now, both ethernets work. Changes: - Rename NVMe slot 1 to ANS1 and injected properties (SSDT) - Rename NVMe slot 2 to ANS2 and injected properties (SSDT) - Rename graphic card slot 1 to EGP0 and injected properties (SSDT) - Rename XHC0 to XHC2, XHC1 to XHCI, XHC0 (2) to XHC3 with all ports correctly mapped (SSDT) - Added HPET SSDT - Added DTGP SSDT (for graphic card SSDT) - SSDT-EC0 + oc patch Note: I have also created a SSDT to rename XHC0 to XHC2 and XHC1 to XHCI, at the same time. Not used in this config. Note 2: Sleep/wake still not working. PC enters to S3 state but immediately wakes up.

Updated to Beta 5. Updated to latest kexts. Switch back to Nvidia GT 710.

MAJOR UPDATE: I have created next SSDTs: 2xNVMe (Slot 1 and 2), graphic card (Slot 1 PCIe), HPET (SSDTTimer). Two ethernet ports are working, but 2.5Gb one at 1Gb. Added AGPMInjector kext for RX 590 With respect to sleep/wake, it enters to S3 state but immediately wakes up. @MaLd0n any advice? If you need any file (or the hole project), I will send it. I also extracted the ACPI table with OC and added the SSDT-*.aml files to OC. Is this necessary? Thank you in advance!

No, an update is not needed. But it is recommended.

If you are on beta 5, try to disable AMDRyzenCPUPowerManagement.kext

UPDATE: I have updated the USB map due to a better understanding of the ACPI table. Now, it works like a charm. READ THE NOTES. Also updated EFI folder. Thanks to @MaLd0n for sending me the ACPI manual. IORegsitryExplorer image: UPDATE 2: Sleep still no working, I am on it. UPDATE 3: As far as I red, people still have Preboot disk instead the name of the HDD, I think this is due to XHC0, with the new SSDT rename, I get MacOS Big Sur, which is how I name my HDD, when I boot. UPDATE 4: Increased RAM frequency to 3600 MHz with no problem.

Release 0.6.4 works in beta 5. Remember you have two kexts, SMCAMDProcessor and AMDRyzenCPUPowerManagement.kext but only first works. The second is just for all power management features. I am working on SSDTs now to make sleep work again, but this time manually.

UPDATE TO DEVELOPER BETA 5 Disable AMDRyzenCPUPowerManagement.kext in opencore. Update as normal.

Probably USB map solves your problem. In theory, you should't have any problem.

Sorry, I have no notifications on my email. I am using the same version. I upload my EFI to OP.