luckbacknow

Unfortunately it is not supported, only 620 and up. Despite not bringing any differences between them, I think the problem is restricted to the device ID.

MaLd0n, the pach informed in it suits? <key> PciRoot (0x0) / Pci (0x2,0x0) </key> <dict> <key> AAPL, GfxYTile </key> <data> AQAAAA == </data> <key> AAPL, ig-platform- id </key> <dados> CQClPg == </data> <key> id do dispositivo </key> <data> pT4AAA == </data> <key> framebuffer-fbmem </key> <data> AACQAA = = </data> <key> framebuffer-patch-enable </key> <data> AQAAAA == </data> <key> framebuffer-stolenmem </key> <data> AAAwAQ == </data> <key> hda-gfx </key> <string> onboard-1 </string> </dict>

After successful installation of Catalina, I can't get a graphics acceleration with the UHD 610 from intel. Appears in the Hardware information but only displays 5 Mb of VRam Set-up Motherboard Asus H310 gaming plus br Processador intel G5400 Fonte corsair 500w 12 Gb ram ddr4 3200 balistix Nvme 256 Gb kingspec Hd Samsung 1Tb

MaLd0n I installed the voodooHDA kext and was successful with Audio, thanks Thanks!

Hello MaLd0n, passing a feedback here, I added the NullCPUPowerManagement.kext drive in the other folder and I was not successful, so I took a position, I took the config.plist and DSDT.aml from the clover folder you sent me and put it in my old clover folder, I also kept the SSDT-EC.aml file in the folder pached. Another point, I added in the config.plist that you sent me the command line below <dict> <key> Comment </key> <string> Fix 300-series RTC Bug </string> <key> Disabled </key> <false /> <key> Find </key> <data> oAqTU1RBUwE = </data> <key> Replace </key> <data> oAqRCv8L // 8 = </data> </dict> Installation successful! I thank you for your attention Now I find only problems with audio that doesn't work, could you help me with that?

MaLd0n Replace the clover folder in EFI, and now does not boot the installation

Also follows the decompiled file in IASL DSDT decompilado.zip

I did extracting by F4 Clover and generated these files that I sent you. I found it strange that when opening them with text file they are all encoded.

MaLd0n forgiveness, I forgot to send, follow the file. DSDT.zip

Hi MaLd0n Samuel e Mayconliborio, from the hakintosh Brazil domain, gave me a lot of support here and gave me a direction in which I was able to advance in the installation with the files SSDT-EC.aml e config.plist files. They reported to a discussion in https://www.tonycrapx86.com/threads/solved-stuck-at-debug.292201/post-2092037. Therefore, I was able to start the installation that always stopped with 2 minutes left for completion. I discovered that I needed to manually restart to proceed with the process, I also discovered that the partition table needs to be APFS and not journaling. From there I came to the following screens. I chose this option I get to here and freezes, then restart again and I have the screens below. I have a doubt which one to start with and the most I got was until now My project consists of a trial boot Windows, Ubuntu and Macos. Windows is installed in an NVME that I removed to avoid errors, and will be inserted after finishing the installation of the Mac, while Macos and Ubuntu, share the same HDD with partitions in Ext4 for Ubuntu 250Gb and APFS 250Gb considering that using Journalig did not advance for me. Help me please! config.plist.zip

I did it for diskimage without success, same mistake.

MaLd0n, I recorded the image with Etcher, does this have any positive impact? or better to do with the transmac?

Ok MaLd0n, how should I proceed? guide me please!

Hello! Stuck in the installation of Catalina in a Hakingtosh. set-up Asus Tuf gaming plus H310 Processor:Intel G5400 Memory: ddr4 12Gb Balistix Ssd Nvme m.2: Kingspec 256 Gb Hdd Sony 1Tb FonteÇ Corsair:500w Trying to boot the installation with the following settings: fakecpu Id:0x0306a0 Igpu 0x59168086 0x59120000 Startup instructions: The same ones loaded in the plist in the Catalina 10.15.4 image obtained in Olaria. Please help me! Also follow the error images envio.rar

Hello MaLd0n, sorry to be bothering you with this subject yet, but I'm confused with this problem, getting me sleepy. about radeon 7950, I managed to advance in some aspects, after a lot of grating, editing of dsdt, modifications to the plist of kexts amd7000controler, amdradeonx4000 with insertions of ID of my card and extraction of vbios (with dcpimanager) and patch via clover, I have now full HD resolution. my frustration is not to get VRAM above 5m, even inserting into the clover. Can you tell me which kext does this control? and some modification to change that condition? Adicionado a 8 minutos 5 segundos: follows some files for appreciation Adicionado a 1 minuto 57 segundos: another Adicionado a 2 minutos 29 segundos: another dsdt and kext.zip IONDRVSupport 1.kext.zip config.plist.zip

Hello MaLd0n! on the subject of Radeon 7950, found a Russian site https://www.applelife.ru/threads/pereproshivka-i-ustanovka-amd-radeon-hd-7950-7970-dlja-macpro.41965/ with a very good topic . They reported on the need to extract and inject the ROM from the video card into the mac. Because the topic is old, the link to download the required files is broken. I have already extracted the rom from my 7950.rom card bios and I particularly found the very complex applied method using java 7 to perform the command "/makerom.sh --efifile 7950mac.efi --romfile = = = efiromheader.rom --originalrom card_name rom --devid = 679a "... Do you know of any more efficient method of injecting the bios via rom? via DSTD or even clover? Thank you in advance for your patience!

MaLd0n, after a lot of head banging, made a change in the clover by injecting ATIcard with fake id 0x679a and changing FB from Futomaki to Hamachi which made the system go up. now I do not have vram acceleration only 3mb do you think it has solution?

MaLd0n, I took a look at the link that sent me and there they talk about some boot commands to which I added in the boot argument without success. video crashes when initializing. I have installed the kext's of WhateverGreen and lilu but I can not move forward. Would you have any more information about it? for example you need some fake id for correction

Hello MaLd0n, please help me! I'm having a radeon 7950 video card that I can not boot into my hakingtosh, could you help me? I tried to inject by the clover without success, when it loads the video gives black screen what should I do? on windows, working perfectly. I also noticed that when I run gpuz on windows it brings me the attached info

Hi MaLd0n, is the Radeon R9 290 video card compatible with mojave hakingtosh?

MaLd0n, Good morning, I'm in trouble with the crab I can not make it work, it returns me the message "sorry you can repeat what you said", in the settings does not appear the option to change the source of the microphone as in the High Sierra. microphone works perfectly and is picking up normal in other programs. Can you give me a light?

Olá bom dia a todos tenho aq um problema com a Siri, não reconhece a voz e não permite configuração da entrada do microfone em preferencias, Microfone funcionando perfeitamente para utilitário de voz (acessibilidade) más não com a siri, alguém poderia me ajudar?

Hi, the tp-link Nano USB WiFi model TL-WN725N running smooth on the Mojave os. thank you!

Ok!!

MaLdOn you are the best, very happy here all recognized and working, thank you. About HD 610 I saw someone posting on the insanymac something about it I will not give up, my guess is that it works to make the kexts of 615 or 620, already thank you for the attention! Added in 19 minutes 38 seconds: MaLdOn which WiFi wlan USB do you recommend for me to use Mojave and Windows compatible? Could you report some makes and models?