onemanosx

[ref]nikhilrathore_1999[/ref], No idea. I don't have Asus laptop to test.

I have no idea if you had applied RH's debug patch and used debug kext in order to achieve the ec method in console. However, assuming you had done correctly and no EC method were found, then you might have more luck with this solution. https://github.com/hieplpvip/AsusSMC

[ref]m0ustafamahm0ud[/ref], Remove VoodooI2CHID and use VoodooI2CELAN. Check if trackpad preference appears.

[ref]aryaone[/ref], Check if works. If not, extract new sendme. DSDT.aml.zip

Extract new sendme

[ref]aryaone[/ref], You did not implement windows emulation patch in your DSDT.

[ref]aryaone[/ref], Upload new sendme with Elan kext. Also, upload origin folder.

[ref]m0ustafamahm0ud[/ref], 1. Remove SSDT-XOSI 2. Remove OSI to XOSI rename in clover 3. Remove SSDT-ALS0 4. Remove SSDT-PNLF 5. Remove SSDT - PNLFCFL 6. Remove SSDT-XCPM Replace DSDT. Reboot. Extract new sendme. DSDT.aml.zip

[ref]aryaone[/ref], Use VoodooI2C + VoodooI2CELAN kexts. You are correct, APIC PIN less than or equals to 47 requires no manual pinning.

[ref]m0ustafamahm0ud[/ref], Battery consumption is generally worst in hackintosh than in Windows. You simply cannot compare.

[ref]nikhilrathore_1999[/ref], You are expected to find the EC method. This is something only you can provide. I advise you to read and follow the step by step guide again.

Wrong answer. Read the guide again.

What is your EC method?

[ref]nikhilrathore_1999[/ref], Obviously you did not read the guide. Else, you will understand the term EC method which was mentioned specifically in the guide. That guide requires you to do the necessary for a working hotkey remapping. Each laptops are different. Good Luck.

What is your EC method?

1. Brightness hotkeys - Read guide in USEFUL LINKS 2. AppleALC Audio - Read guide in USEFUL LINKS. You need to find the correct id for your laptop. Test 1 id at a time after each reboot. 3. Using latest macOS will always be slow on a spindle hard drive. Change to SSD.

Your BT and wifi card is not supported in any MacOS. Use AppleALC + Lilu kext + correct layout ID. Make sure you have native AppleHDA kext (not modded). Read guide in USEFUL LINKS I think you have 3rd party kexts in SLE. Remove them. Your config is pretty much the same as before. You did not remove SSDT or Kexts at all. Many errors in your logs causing slow boot. You need to troubleshoot yourself.

Yes. No idea. You did not upload your new debug files.

1.You need to remove unwanted kexts and SSDTs first. 2.Optimise your clover by removing unwanted patches.

[ref]nikhilrathore_1999[/ref], No idea. You need to troubleshoot. Try removing H_EC to EC rename. In clover.

[ref]nikhilrathore_1999[/ref], Remove SSDTs. The errors were there since the beginning even before using my DSDT.

[ref]nikhilrathore_1999[/ref], kernel: considerRebuildOfPrelinkedKernel com.alexandred.VoodooI2CServices triggered rebuild 1. Rebuild permissions and kextcache required. If you had installed kexts in L/E or S/L/E, this is the time to remove them. 2. Replace DSDT and config.plist. https://drive.google.com/file/d/1SxZFRCtSan5QDbuZI6rfSswC4l71-m-j/view?usp=sharing 3. Reboot. 4. Extract new sendme

You need to be more descriptive. What SSDT did you remove? Where does it stuck? What is the verbose message? What kexts did you remove? You are only required to remove VoodooI2CHID kext. This is what you should do: 1. Use my DSDT with config.plist 2. Remove VoodooI2CHID kext 3. Reboot. 4. Extract sendme.

[ref]nikhilrathore_1999[/ref], You only need to boot with my DSDT. SSDT are not required. You are also expected to remove VoodooI2CHID kext. Thereafter, I need a new sendme once reboot.