fabiobh

Consegui restaurar, usei um pendrive com instação do Mac Sonoma que tinha aqui e deu boot por ele. Deu certo

I have an Intel 9400f with RX 560. I was using it normally, after install some softwares in my Hackintosh, it was become very slow and I restart it. But when it start again, after the initial post boot messages, instead of show the desktop, it appears to lose connection with the monitor. The screen turns off. Any ideas of what is happening withmy Hackintosh ? I try to reset nvram, but it did not work.

Hi @MaLd0n I was able now to install now a new MacOS version, Sonoma. But I need to install from scratch. I try to use the same EFI that you send me for Ventura, but it didn't work even after I update all kexts using OCAT. Can you generate an EFI folder with a DSDT patch using the files from RunMe.app files below?Send me FabioCunhas-Mac-Pro.zip

Hi @MaLd0n can you help me generate a DSDT for me, please?

Hi @MaLd0n I was able to install Mac Somoa 14.6.1 on my Desktop. Can you generate the DSDT patch for me , please? Send me FabioCunhas-Mac-Pro.zip

Foi no link que você postou que eu peguei a EFI do Desktop CoffeeLake Download essa é a EFI correta pro 9400f? Criei um pequeno video mostrando o erro

fui na BIOS e desativei o CSM, mesmo assim não alterou em nada, continua dando "sem sinal" no monitor depois de um tempo que o verbose(as letrinhas brancas) ficam rodando

Criei um pendrive de boot como sempre faço ao tentar instalar no nova grande versão do MacOS, nesse caso de Ventura para Sonoma. Tenho um Intel 9400f e uma AMD RX 560 que funcionam muito bem com o Ventura. Criei um pendrive com a imagem 14.5 do Sonoma, coloquei no pendrive com o Balena Etcher e depois peguei o link abaixo para pegar a EFI do Comet Lake, pois pelo que pesquisei o 9400f é um processador Comet Lake Desktop CoffeeLake Download https://olarila.com/files/OPENCORE.MOD1/EFI.Opencore.Desktop.CoffeeLake.MOD.zip Peguei a EFI acima e coloquei no pendrive tbm. Ao tentar dar o boot, o processo inicia, porém um tempo depois as letras que vão aparecendo, simplesmente somem e o monitor mostra "sem sinal". Não sei como devo proceder neste caso. Alguma ideia do que pode ser?

I check config.plist file in OpenCore and the LauncherOption is already set to full

When I turn on my Lenovo S145, the boot always fails, for an unknown reason the laptop selects the "OpenCore" boot option. To start the laptop properly on MacOS, I need to press F12 and select "EFI Hard Drive (KINGSTON...)", otherwise, the laptop choose "OpenCore" option and the boot didn't work and the laptop is restarted. I try to put a new files on the EFI folder on mu NVME, but the behaviour presists. How can I remove the "OpenCore" option from boot?

I am already use Ventura 13.4. I try to change the smbios, but it didn't work. I download the Ventura 13.6.3 and install and it didn't start using my EFI. But I use the kabylake EFI e it works for me. Just need some corrections, but at least in Ventura 13.6.3 I was able to use the last Xcode version. I will continue using this way until Xcode requires a higher version of MacOS. Thank you for the help.

I have a Ideapad S145 with 8130u processor and I can't access boot screen with Sonoma Installer I download the Sonoma 14.2.1 image and put it on my 32gb USB drive using Balena Etcher. After that I get the Kaby Lake EFI folder from the link below: First, I download the EFI from Kaby Lake and put it on my USB drive. This is the error that I got: After that I download the EFI folder of CoffeLake and I got this as a result: My last try was to download the EFI folder from CoffeeLake Plus, it works for some time at least when I try to run: but after some time it just restarts Which is the correct EFI folder to use with Lenovo S145 with 8130u processor?

Hi, just revive this old topic to ask another question. What is the correct way to update a MacOS version. I ask that because when I try to update a MacOS version, I always get a black screen after the update. I will try to update from Ventura to Sonoma. What is the correct procedures to update a MacOS version using Hackintosh ?

gtx 760 is NOT compatible with MacOS, you will need an AMD gpu

Vi este video no Youtube e me supreendi com a noticia que APUs de Ryzen agora estão sendo compatíveis com Hackintosh Vi este notebook no MercadoLivre https://produto.mercadolivre.com.br/MLB-3443855213-notebook-lenovo-ideapad-3-ryzen-5-5500u-2-meses-de-uso-_JM#polycard_client=bookmarks Alguém já efetivamente conseguiu usar um Hackintosh com APU ? Se sim, esse notebook seria compatível com Hackintosh usando o NootedRed ?

Eu tenho um Ideapad S145 de oitava geração com dois nucleos(cores) e funciona bem. Porém estava querendo comprar um melhor. Vi este modelo e achei interessante https://www.lenovo.com/br/pt/laptops/ideapad/serie-300/IdeaPad-3-15ITL6/p/82MDS00500 Porém descobri que o GPU integrada Xe Iris não tem suporte no MacOS. Portanto procurei outro modelo e achei esse: https://www.magazineluiza.com.br/notebook-lenovo-ideapad-3i-i3-1115g4-4gb-128gb-ssd-intel-uhd-graphics-windows-11-15-6-82md000fbr/p/fd68bg3hb3/in/note/ Ele é 11 geração, porém ele usa GPU integrada Intel Graphics em vez de usar Xe Iris. É possível fazer um Hackintosh neste notebook? Caso não seja, possível, teria alguma recomendação de notebook para fazer Hackintosh?

When I try to turn off my Hackintosh, It works now. Thank you so much for your help.

Send me iMac 9400f placa mãe WorldPC generica.zip I attach the "Send me" file here. I was able to install MacOS Ventura. I suppose the video is working properly thanks to RX 560 that contains native support. Just want to generate an DSDT. The only problem now is when I try to turn off the PC, the screen goes black, but the Hackintosh didn't turn off. I suppose creating the DSDT can fix this problem.

I was able to find the internal webcam on Hackintool. I didn't know that the internal webcam is connected to the computer using a USB port. I was able to kill the USB port, thank you very much @MaLd0n

I was able to install everything in my Lenovo Ideapad S145 with 8130u. But the webcam didn't work, but the camera is detect by the system. I use Firefox and access some web sites that requires a webcam, but when the site try to access mu webcam, it didnt work. Is it possible to deactivate the webcam that is not working properly?

When I power on my Ideapad S145, it finds my NVME with OpenCore and Ventura installed on it look at boot disk. I receive 2 options to boot, if I choose the first option. the boot fails, if I choose the second option, it works properly. but the problem is when I restart the computer, the Ideapad always choose the first option. Everytime I need to press F12 at boot and choose the second option. Is it possible to delete the first option from the boot ?

Do you have any tip of how to do that in a legacy way?

I create a bootable USB Stick using Monterey Olarila Image. I try to boot my PC (Monterey on i3 3240 with Intel DH67BL) but UEFI is not available. IIt shows an error that says that is not possible to find a boot device. I use this USB Stick on my laptop and the laptop was able to find the USB Stick boot device.(This laptop has UEFI boot available). Is it possible to boot OpenCore using Legacy Boot instead of UEFI ?

@MaLd0n tem algum tutorial que mostra isso?

Is there something like that app for Big Sur?