Tuttle

Hello 1 the dsdt this is for the two units or for the new one 2 I have tried it in the new one and nothing changes, 3 what I detect is that in this unit the BCM94360NG card does not work and in the first unit it works should load without problems?

Thanks there you have it with the same folder as the first team, with a new SMBIOS 2_Send me iMac-Pro https://we.tl/t-uKEMnh0Zm2 I have detected that when I turn on the equipment with a single monitor via hdmi, the hdmi audio is not detected, I disconnect the cable and reconnect it and it is recognized, is it normal? with both monitors it does not happen

the same model yes the difference between them is: the first one has more ram and faster and two 500gb ssd units and another type m2 and also 500gb the second has less ram 8gb and a single 128gb m2 disk WiFi changed to a bcm94360ng

https://we.tl/t-T0rI9LLeCE

good afternoon I have bought another identical mini pc, and I take the opportunity to change the Wi-Fi cards for BCM94360NG in both units in the first one you helped me with the DSDT and the kexts, I had to remove the wifi and bluetooth kext to make it work, now the airdrop works correctly, but in the second unit, the new one, they DO NOT work well, with the same DSDT and Kexts , from the first and it seems not. someone who sheds light on what is happening thanks Send me iMac-Pro https://we.tl/t-ciLpdUjdMn

airdrop?? from the computer I see my phone, but no matter how hard I try, I can't send anything and from the phone I don't see the computer any ideas Thank you

I thought it was just the kexts in the folder ?‍♂️ Thanks now SD works for me

sorry just add the two kexts to the folder. What entries do I have to add and in what order?

negative EFI-OC-KEXTS

YES REALTEK RTS5179 KBC87H1 GK47CC. RTS5179_KBC87H1_GK47CC.jpg.zip Do I need to enable cropping support? on the NVEM drive where I have Windows is enabled and the SSD OSX drive is disabled

https://we.tl/t-0Wfip4A1bZ

Hello at the end I wanted to check what chip I was mounting and in fact it is an attached photo es8336, I understand that there is no support for this. I tried a usb with microphone input and audio output and it recognizes it perfectly, it would be a solution until a clear solution is found, it's a shame. well apart from the audio, I have the card reader dead, it is possible that if I change the model, since I have a miniMac 8.1 to another, this device works correctly? If so, which one do you recommend? and i tried the airdrop and it doesn't work either note: the hdmi audio only in one of the screens, it was due to the fact that I had an hdmi to dvi cable and that is why the audio did not pass, I changed it to hdmi hdmi and both give me audio output Thanks CHIP ES8336_RB150031.zip

Thanks for your support, I took a break with the audio and looked at the second monitor, I replicated your opencore settings by adding the following three lines framebuffer-con2-busid = 01000000 framebuffer-con2-enable = 01000000 framebuffer-con2-type = 00080000 The following happens, I see the screen and suddenly I lose it with interference, I thought it was the cable and I verified that no, I was also changing the type of connector in the configuration, trying the 00020000 and 04000000 for "framebuffer-con2-type" Without any result I already think I managed to fix it He was the framebuffer-con1-busid = 01000000 framebuffer-con2-busid = 01000000 I changed it to framebuffer-con1-busid = 01000000 framebuffer-con2-busid = 02000000 now if the two monitor models appear before two identical ones appeared ? fantastic now at least I have hdm audio, in only one of the monitors that both have speakers, I'm going to get my strength, tomorrow will be another day

hi in Hacking Tool nothing comes out in sound and now that I added the second screen, only hdmi audio appears Intel (0x8086) Intel Kabylake HDMI (0x280B)

I have not found any information about the audio codec and opted for brute force, Well I've been 20 reboots, trying different values for alcid = X without result and I see that up to 553 can be tested Can this lead to satisfactory results? Is there any other way? ?

can be this Device Properties: Driver Description ESAuDriver Device Driver Date 20/01/2021 Driver Version 13.59.38.240 Driver Provider Everest Semiconductor Co. INF File oem2.inf Hardware ID ACPI\VEN_ESSX&DEV_8336

in the first post I sent you a file "Report Primux iox Mini X41.htm" generated with the engineer aida64 Can that information be worth it?

Ok How do I check the audio codec? now they work the wifi the bluetooth the audio does not work, neither the screen 2 hdmi2, nor the card reader but very happy with the progress you are a crack You mean this? [ Controlador de audio de la tecnología Intel(R) Smart Sound [8086-02C8] [NoDB] ] Device Properties: Device Description Controlador de audio de la tecnología Intel(R) Smart Sound [8086-02C8] [NoDB] Bus / Device / Function 0 / 31 / 3 Device ID 8086-02C8 Subsystem ID 10EC-119E Revision 00 [ Realtek USB 2.0 Card Reader ] Device Properties: Device Description Realtek USB 2.0 Card Reader Device ID 0BDA-0129 Device Class FF / FF Device Protocol FF Supported USB Version 2.00 Current Speed High (USB 2.0)

hecho https://www.transfernow.net/dl/20220103G7aKN0Ei checked this is missing: audio devices and also by hdmi the hdmi 2. does not work either wifi and bluetooth and the card reader neither Thank you

Tested much better now Do you have a solution to the question of audio, wifi and bluetooth? what would you recommend me

thanks Send me Mac-mini.7z.001.zip Send me Mac-mini.7z.002.zip

Hi all with your files I have managed to start this toy now comes the hard part, could you give me a hand? Graphics acceleration, audio, wifi and bluetooth fail as usual. Thanks macOS Monterey and OpenCore ACPI.zip pictures.zip Report Primux iox Mini X41.htm.zip