jake99x3

@MaLd0n I added the SSDT file to my EFI and took a new snapshot with propertree to add the SSDT to my config.plist but I still am unable to reach the boot picker for some reason. I have attached my bootlog files and the EFI I am using If I could please get you to take a look. I am desperate. Bootlog AND EFI folder- https://file.io/IVFJqBjqRziC sorry I have 2 accounts. I am the OP. Same specs. Ryzen 5800x gigabyte b550m aorus elite ax + 16gb ram and 6650XT

I have built a new ryzen hackintosh and installed Monterey on it using Olarila vanilla images for monterey. I had a custom SSDT .aml file for RX 6650 XT and added it to my EFI from this thread here: https://www.olarila.com/topic/31182-upgraded-rx-5500-xt-to-6650-xt-no-hardware-acceleration-10mb-graphics/. I added this SSDT file and installed Monterey but my graphics had no acceleration and only displayed 10mb in about this mac so I switched Whatevergreen for NootRX.kext which fixed acceleration. The problem is I get random freezing whenever I open programs, move the mouse or click it. It just displays the spinning beach ball. What could cause this @MaLd0n ? I have uploaded my EFI here since it is larger than the file size limit: https://github.com/jake99x3/ryzentosh/blob/main/EFI.zip Specs: Mobo: Gigabyte b550m aorus elite ax CPU: Ryzen 5800x GPU: 6650 XT 8GB 16gb ram

I have this same problem xD

I was able to resolve this issue with my Monterey install by using the Device Properties listed in the image I have linked along with the boot arguments "igfxonln=1 agdpmod=vit9696" as suggested by @MaLd0n. Posting here for anybody else that runs into this issue with UHD 630 on i5 8500 Device Properties: https://ibb.co/d2F8HZY

Indeed. I replaced -igfxvesa with igfxonin=1

Does this look correct? https://ibb.co/PgfqD3q Edit: I just booted the EFI with the patch applied, Reset NVRAM, booted back to my Monterey install with the EFI with new patch and it's still very laggy ?

Is there a guide for creating this video patch? I tried following one off YouTube but it did not work, only caused the EFI to no longer work. Fortunately I made backups and had another copy on USB. I followed your guide here for installation

I have installed monterey 12.2 on my Gigabyte z390 I Aorus Pro Wifi with i5 8500 using integrated graphics and 16gb of ram. I used the Desktop Coffee Lake Folder from MaLd0ns Intel Opencore guide and added the boot argument "-igfxvesa". The machine boots to desktop fine but it's a bit laggy and when I click about this Mac the graphics section only shows 7mb. What should I do? Do I need to donate? @MaLd0n

Indeed. I have reset bios to defaults, set sata mode to AHCI, disabled fast boot and set boot mode to UEFI. I am trying again just to see what happens but the error persists ? I've generated new platform info using OCAT Update: The PC has rebooted and I am now in the 2nd half of the install Cheers! ? after rebooting to the apple logo with "about 18 minutes remaining" etc it gives me this error: https://ibb.co/vmM9TNF Any suggestions?

It is just a regular Western Digital SSD. No nvme

It still gives me the same error ? I downloaded Olarila Monterey and OC Mod EFI for Desktop Coffeelake and added -igfxvesa to my boot args

Will do. I will update back tomorrow. Thank you

I am trying to boot EFI Opencore Desktop CoffeeLake for install of macOS Catalina. The installer boots and gets all the way to 2 minutes remaining when it fails with the errors I have uploaded a picture of below. The Desktop is connected through ethernet during install and I have run the date command from terminal. Still the issue continues, Any help really appreciated. Specs: MSI z390-A Pro. 16GB DDR4, UHD 630 i5 8500 https://pasteboard.co/3xHCEkrqvwXn.png https://pasteboard.co/lbUKHlH0tfSf.png

I have added the properties/values to Device Properties within config.plist for 8th Gen UHD from My Hackintosh still boots Catalina after applying the patch but there is still no accelerated graphics and it displays as 7mb in About This Mac. I am attaching my config.plist in a zip file config.zip

Yes I have set bios settings to default settings but the error persists. I am using the Clover Chipset Series 30, 40 EFI from your tutorial thread. I have added the boot argument "-igfxversa" because I am using UHD 630. I am also using the Olarila Monterey Image

I have set bios settings based on the Dortania Intel Guide. It is also connected to ethernet during the install process?

I am using a sandisk 480gb SSD, no nvme. I have tried the clover and OC EFI.

Hardware: CPU- i5 8500 using integrated graphics MOBO- MSI z390-a Pro 16gb ddr4 I downloaded the Olarila Monterey Image for chipset series 300,400 and 500 from Mounted EFI and added "-igfxvesa" to my boot arguments as I am using UHD 630. After booting to installer I am able to format my disk and the installer goes to about 15 minutes remaining when it gives me the error "An error occurred loading the update" and I am not able to proceed further. Here is an image of my error: https://imgur.com/a/Qpb19oG

Thx for all the documentation on this site ?

I switched the EFI folder to the Olarila Coffee Lake Desktop EFI and it goes through the boot without hanging and then black screens... Edit: I have now resolved this issue by adding my Bus-ID values to Device Properties within the Olarila Coffee Lake Desktop EFI

MSI z390-A pro 16gb Ram i5 8500 using integrated graphics Created my installer using my existing Gigabyte z390 Hackintosh. Generated the EFI folder using OCGen-X tool and I am unable to boot into installer to do a fresh install. Here is a picture of where it hangs on boot when booting an existing install: https://ibb.co/Bcr6mkg. Any help would be really appreciated... Maybe I should try a different EFI? I have uploaded my existing EFi with SMBIOS removed here: https://easyupload.io/dc1wak