suren munoo

@MaLd0nThe Lan port has failed completely, does not light up when a cable is plugged, I tested the power on the port and it's dead. Because the board still has warranty, I am sending it back and getting the Z890 ProArt.

Hey @MaLd0n Can you share this specific EFI? I am looking to buy this board as my Z790 ProArt 10G Lan has failed and Froont usb C has failed. I will get the same i9 CPU as well.

With OCLP making the patch for BCM cards in Sonoma, will this work on the Asus Z790 ProArt Creator. I have added in those edits IOkexts but cannot boot again, only when I remove those edits then I can boot again. EFI 3.zip

Done and working only no wifi but bluetooth works.

I found that attached using google on ReditCan you give me the dev id? do I just add it in device properties? SSDT-6950XT-73A5-GPU-SPOOF.aml.zip

Hi, Is there anyway to get the RX6950XT working with Mackintosh. I tried it yesterday and it does not boot. No error but verbose mode just keeps running and does not stop.

Hi. I did as you said and did not change anything in your refi you supplied me via telegram. When I check Hackintool and IOReg my SS and SSP USB ports do not show up including the 10GB network port. Send me iMac-Pro.zip

What is the telegram contact details? Also can you do this on Friday evening. I am in New Zealand so there is a time difference.

Hi @MaLd0n I finally had some time to do this. I used the files you gave me but I could not boot with that DSDT you had there so I disabled it in the config.plist. Also the system was freezing when I had the network cable in the 10Gb network port, I moved it to the 2.5Gb network port and its not freezing up and rebooting anymore. Send me iMac-Pro.zip

Thanks, I will put this in a try again

Hi Mate. I downloaded another EFI for AlderLake. I added in the TB SSDT and 10GB SSDT as you said but also added in my custom SSDT.UIAC which I created using Hackintool. Without this in Hackintool I am not seeing any SS or SSP USB ports. Send me iMac-Pro.zip iMac Pro.zip

This is the EFI. EFI.zip

I am not sure why but that EFI is not letting me boot into Monterey again. It does the verbose and then the PC does a restart but does not show bios splash screen or anything. I have to shutdown and do a bios battery pull for it to go into bios again. I got the below using your normal Z690 EFI, not sure if it will work. Mac Pro.zip

Thanks, Find attached please. Send me iMac-Pro.zip Suren Mac Pro.zip

Hi @MaLd0n Since the last updated DSDT I got for the Gigabyte Z690 Aero D, I have been battling with Monterey taking a very long time to load and also to get my 10GB Aquantia ACC113 network card to work. I also tried to map my usb via Hackintool because the Fenvi T919 wifi and bluetooth were not working including the thunderbolt 4 ports SSP1 and SSP2 which now shows that is working when I remove the previous DSDT. In ACPI folder I have an SSDT for the 10GB network card, MapleRidge TB4 and my usb SSDT. I tried Ventura as well which has wifi and BT now working but no TB4 and no network works. Also my apple keyboard and mouse has to always be repaired to Mac when I log back in after a restart and sleep does not work. It shut down to sleep and 2 seconds later it all starts back again Send me Mac-Pro.zip

Thank you

Hi @MaLd0n I got a Gigabyte Z690 Aero D as well for DDR5, can I use the same DSDT for the Aero G board. Attached is the rune file from the Aero D. Send me Surens-Mac-Pro.zip

Can we use same EFI for Monterey and Install this, I have your latest efi

Thank You

Hi @MaLd0n Find attached runme file please for my new Z690 board. Send me Surens-iMac-Pro.zip

It does the same in Monterey. I put in a display monitor calble to HDMI and it now works. Strange that HDMI is only affecting MacOS and not Windows so that rules out any issues with the graphics card. I did a clean install of Big Sur and Monterey and was still the same.

Yes, CSM is disabled

I am using Powercolour RX6800XT since a year now And the MB is Gigabyte Z490 VD

Hi @MaLd0n I downloaded the latest EFI from the EFI Folders for Rocket Lake but i am gettting constant screen flashing on/off. See the video in the google link please. I went back to the old EFI but this remains the same with flashing. The screen works perfectly in Windows 11 but in Monterey and Big Sur it just flashes all the time. I tried to get the details using runme but i cant because of the constant turning off/on of the monitor. https://drive.google.com/file/d/1PwassijOko-ptycQtuTfPWFplHnfZbPK/view?usp=sharing

I generally do not use wifi much but when I try in Monterey, it does not work but works perfectly in Big Sur. Also in Monterey, the bluetooth will not connect to any of my iPhones or Macs but will connect to android. In Big Sur bluetooth connects to everything properly. The attached error is when I try to turn wifi on. Screen Shot 2021-11-29 at 8.12.59 PM.zip