SemoB

Thanks for your reply. My kernel panic is below. My macOS installation is on a SATA SSD, not an NVME. I have Windows on my NVME - it is a Crucial CT1000P5PSSD8. Rest of my system: MSI B560M (Comet Lake), 10th Gen Core i5 10400, iGPU headless, MSI Radeon RX460 4GB, SMBIOS iMac 20,1, macOS Monterey 12.5 (21G72) Thank you.

I don't want to disable iGPU as I want to use Sidecar. Is there another way?

Can you please link the thread where this was resolved? I'm having a similar issue.

Hi, I've recently built a new iMac Hackintosh and everything seemed to work well for a while, but recently I've been having stability/freezing issues whilst using macOS (Monterey). It's quite random but I've picked up on one semi-regular pattern: When shutting down/restarting, more often than not macOS will close all applications then simply hang right before shutdown (the macOS desktop background) and will stay there forever until I kill it. Other times and at random points whilst using macOS the system will simply hang - nothing works, no mouse, no keyboard, and display is frozen. Then I need to kill it. The error report I get following reboot says the following: I don't know if this means anything, but I'd like to try troubleshooting this issue but I don't know where to start. Any pointers would be greatly appreciated. My system: MSI B560M (Comet Lake), 10th Gen Core i5 10400, iGPU headless, MSI Radeon RX460 4GB, SMBIOS iMac 20,1, macOS Monterey 12.5 (21G72) Thank you. Edit: changed system chipset to Comet Lake.

Hello, I've recently installed macOS Monterey on an MSI B560M with a Comet Lake i5-10400 CPU. I do not have a dedicated GPU. The iGPU will only output signal if I run in VESA mode, but when I inject WEG it won't output anything. I tried patching framebuffer as shown in this photo but it still doesn't work. I can't get my iGPU to work properly. Any help is greatly appreciated. Thank you. https://imgur.com/a/IyPrdBL

Hi all, I am currently dual-booting Windows 10 and macOS Catalina. My current WLAN/BT chip is an M.2 Atheros Killer which is great for gaming (on Windows 10) but of course doesn't work with macOS. I don't want to just swap it out for a Broadcom because the Killer is much better, but I do have a spare M.2 port inside my laptop. Can I get a Broadcom into that port and then keep Killer for Windows and activate Broadcom for Mac? I'd like to know if this is possible before buying. Thanks.

Thanks Yukon, but I want it to auto-boot into the last booted volume. It used to work OK in the past but I think a Clover update or maybe something I changed broke it. Any pointers?

Hi, in the past I used to be able to set up Clover to run a countdown before booting automatically to the selected drive. I did this by going to Clover Configurator, Boot, setting the Default Boot Volume to "Last Booted" and setting a timeout value (5 seconds). However, this doesn't seem to work any more after I updated Clover. I can't figure out why. Could someone please have a look at my config.plist and let me know what's causing the issue? Happy to share a link to EFI folder if needed. Thanks. config.plist.zip

I'm not using that computer any more. Have you gone through the process of copying your EFI from your USB to your hard disk's EFI partition?

Update: so, while using this kext fixes the trackpad issue, it also broke my brightness controls, which previously worked with VoodooPS2Controller. What can I do to fix this @MaLd0n? Thanks.

Thanks for this. If I remove VoodooPS2Controller my keyboard stops working. How do I make sure this doesn't happen? EDIT: I went on and removed VoodooPS2Controller and used your attached kexts on its own, and now I have gesture support and my keyboard works just fine. Thank you very much, Maldon!

It is Synaptics according to Lenovo.

Did you manage to get gestures working on your trackpad? If yes what kexts did you use? Thanks.

Can you provide some guidance on this please? How do I determine the correct PS2 Kext for my trackpad? What process do I need to follow? Thanks.

Thanks Maldon. Which Kext should I try?

Hi, I've just installed macOS Catalina on my Broadwell Lenovo B50-80. I managed to get everything working except for gesture support for the touchpad. The touchpad itself works (clicks and moves with one finger) but when I go to Preferences, Trackpad, it is not recognised there and so I can't use any multi-touch gestures like scrolling, zooming etc. I believe my touchpad is an ELAN (I had ELAN drivers in Windows). I've tried different Voodoo PS2 kexts but I haven't managed to get gestures to work at all. I've tried to attach my RunMe output file and my Clover folder to this post for further information, but it says the files are too large, so here's a link instead. https://drive.google.com/open?id=1BAIlKMrqm9vgXseluDgZNkwwyV8UYdg8 Please any help is appreciated. Thank you. Also I think my DSDT is OK but any help with DSDT/SSDT is appreciated.

[ref]MaLd0n[/ref], any ideas please?

Hi [ref]MaLd0n[/ref], thanks for the reply. My Clover version is 5070. AppleALC version is: 2019-11-17 23:45:08.717494 Some info for AppleALC.kext => Identifier: as.vit9696.AppleALC | Version: 1.4.2 AppleHDA version is: 2019-11-17 23:45:07.145137 Some info for AppleHDA.kext => Identifier: com.apple.driver.AppleHDA | Version: 283.14 | Other infos: AppleHDA 283.14, Copyright © 2000-2019 Apple Inc. All rights reserved. Inject Kexts is set to Yes.

Hi all, I'm on macOS Catalina and I have this issue where sometimes when I boot into macOS, the sound won't work, and the OS won't recognise my audio hardware (neither speakers nor mic, but then when I restart (sometimes need to restart twice), it recognises the hardware and everything is well. Can anyone shed light on why this is happening? I'm using AppleHDA and AppleALC kexts, and injecting Layout 29. Any help is appreciated. If you need any more info on my system please let me know. PS: this also happens with trackpad sometimes, although less frequently.

Thanks [ref]onemanosx[/ref], couldn't have done it without you.

Aha, that was it. I missed CYCN. Patched it and now it works! Thanks, [ref]onemanosx[/ref]. Is there anything else I need to do regarding power/battery management?

Hi [ref]onemanosx[/ref], I tried to follow this guide to patch up my DSDT. Unfortunately, I couldn't get it to work. I've attached both my original DSDT and the "patched" one. Could you please advise me on what went wrong? (I've also attached a RunMe extract if needed). Thanks. Send me Isams-MBP.lan.zip DSDT-Edited.zip DSDT-Original.aml.zip

Update: I've managed to get it to work and successfully install using the above DSDT. Turns out I hadn't chosen it from the Clover boot options before booting.thanks [ref]MaLd0n[/ref].

Hi, I have just installed macOS Catalina on my laptop. Many things still don't work (like audio, battery, PS2 trackpad, Bluetooth, etc (I'm still working on getting everything working). I have run the RunMe app and attached below my Send Me output. I would appreciate a tailored DSDT. I'm happy to provide any further info as needed. Thanks again. Send me Isams-MBP.lan.zip

[ref]MaLd0n[/ref], I tried the updated EFI and I still get a crash and reboot half-way through installation. Could you please help me with my issue? I appreciate you're busy but I've been waiting for a response for a couple of days now. Thanks. Edit: I managed to get it to work thanks.