titoon

hello MalDon, always error , this is my files 00:000 00:000 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:312 00:312 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:621 00:308 AAPL: #[EB|H:IS] 0 00:931 00:310 AAPL: #[EB|LOG:INIT] 2024-01-17T13:59:47 01:086 00:155 AAPL: #[EB|VERSION] <"bootbase.efi 540.120.3~22 (Official), built 2022-08-09T02:59:17-0700"> 01:138 00:051 AAPL: #[EB|BUILD] <"BUILD-INFO[308]:{"DisplayName":"bootbase.efi","DisplayVersion":"540.120.3~22","RecordUuid":"F0E4536D-66BD-4683-8B36-C38D7CA34143","BuildTime":"2022-08-09T02:59:17-0700","ProjectName":"efiboot","ProductName":"bootbase.efi","SourceVersion":"540.120.3","BuildVersion":"22","BuildConfiguration":"Release","BuildType":"Official"}"> 01:190 00:051 AAPL: #[EB.CFG.DEV|!] Err(0xE) <- RT.GV booter-strict-xmlparser 7C436110-AB2A-4BBB-A880-FE41995C9F82 01:241 00:051 AAPL: #[EB|CFG:DEV] r5 0x0 0x0 01:293 00:051 AAPL: #[EB|H:IS] 0 01:345 00:051 AAPL: #[EB|WL:MODE] 0 01:398 00:052 AAPL: #[EB|CFG:ARG] boot-save-log 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) default 01:450 00:051 AAPL: #[EB|CFG:ARG] wake-save-log 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) default 01:501 00:051 AAPL: #[EB|CFG:ARG] console 0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) default 01:552 00:051 AAPL: #[EB|CFG:ARG] serial 0x0000000000000001 (0x0000000000000001 < 0x0000000000000000) default 01:603 00:051 AAPL: #[EB|CFG:ARG] preoslog 0x0000000000000001 (0x0000000000000001 < 0xFFFFFFFFFFFFFFFF) default 01:655 00:051 AAPL: #[EB|CFG:ARG] timestamps 0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) default 01:706 00:051 AAPL: #[EB|CFG:ARG] log-level 0x0000000000000001 (0x0000000000000001 & 0x0000000000000021) default 01:758 00:051 AAPL: #[EB|CFG:ARG] breakpoint 0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) default 01:810 00:052 AAPL: #[EB|CFG:ARG] kc-read-size 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) default 01:862 00:052 AAPL: #[EB|H:IS] 0 01:914 00:051 AAPL: #[EB|WL] 0 0 0x01 0x01 0 0x00 01:965 00:051 AAPL: #[EB|BRD:NV] Mac-27AD2F918AE68F61 02:017 00:051 AAPL: #[EB|B:VAw] 02:069 00:051 AAPL: #[EB|B:IAw] 02:121 00:051 AAPL: #[EB|WL] 0 0 0x01 0x01 2 0x00 02:173 00:052 AAPL: #[EB.BST.IDT|+] 02:225 00:052 AAPL: #[EB.BST.IDT|-] 02:278 00:052 AAPL: #[EB|WL] 0 0 0x01 0x01 3 0x00 02:330 00:052 AAPL: #[EB|WL] 0 0 0x01 0x01 4 0x00 02:384 00:053 AAPL: #[EB|BRD:NV] Mac-27AD2F918AE68F61 02:436 00:052 AAPL: #[EB|WL] 0 0 0x01 0x01 5 0x00 02:488 00:052 AAPL: #[EB.H.CHK|BM] 0x0000000000000000 02:541 00:052 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:593 00:052 AAPL: #[EB|WL] 0 0 0x01 0x01 23 0x0E 02:646 00:052 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:698 00:052 AAPL: #[EB|WL] 0 0 0x01 0x01 24 0x0E 02:750 00:052 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:803 00:052 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:855 00:052 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:908 00:052 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82 02:961 00:052 AAPL: #[EB|H:NOT] 03:013 00:052 AAPL: #[EB|SB:P] 0x0 03:067 00:054 AAPL: #[EB|LIMG:DP] Acpi(PNP0A03,0)/Pci(1D|0)/Usb(0, 0)/Usb(5, 0)/HD(Part2,SigBC250D8A-2694-47FB-820B-3D2300FB3997) 03:119 00:052 AAPL: #[EB|LIMG:FP] \System\Library\CoreServices\boot.efi 03:172 00:052 AAPL: #[EB|LIMG:OPT] 03:224 00:052 AAPL: #[EB|RPS] 0 0 0 03:277 00:052 AAPL: #[EB.OPT.LXF|F] <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> 03:329 00:052 AAPL: #[EB.LD.LF|IN] 0 1 <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> <"0"> 03:382 00:052 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> 03:434 00:052 AAPL: #[EB.OPT.LXF|LF!] Err(0xE) 03:486 00:052 AAPL: #[EB.OPT.LXF|F] <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> 03:538 00:052 AAPL: #[EB.LD.LF|IN] 0 1 <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> <"0"> 03:595 00:056 AAPL: #[EB|KF] <"root-dmg=file:///BaseSystem/BaseSystem.dmg"> 03:645 00:050 AAPL: #[EB|MBA:CL] <""> 03:697 00:052 AAPL: #[EB|MBA:NV] <"-v alcid=1 npci=0x2000 watchdog=0 dk.e1000=0 e1000=0"> 03:749 00:051 AAPL: #[EB|MBA:KF] <"root-dmg=file:///BaseSystem/BaseSystem.dmg"> 03:801 00:051 AAPL: #[EB|MBA:OUT] <"-v alcid=1 npci=0x2000 watchdog=0 dk.e1000=0 e1000=0 root-dmg=file:///BaseSystem/BaseSystem.dmg"> 03:853 00:052 AAPL: #[EB|LOG:VERBOSE] 2024-01-17T13:59:50 03:905 00:052 AAPL: #[EB|OPT:BM] 0x2 03:968 00:063 AAPL: #[EB.OPT.LXF|F] <"\\System\\Library\\CoreServices\\PlatformSupport.plist"> 04:020 00:051 AAPL: #[EB.LD.LF|IN] 0 1 <"\\System\\Library\\CoreServices\\PlatformSupport.plist"> <"0"> 04:075 00:055 AAPL: #[EB|P:CPR] N 04:125 00:049 AAPL: #[EB|P:MPI] N 04:177 00:051 AAPL: #[EB|P:BPI] N 04:229 00:052 AAPL: #[EB|KMR] 493727744 04:281 00:052 AAPL: #[EB.CS.CSKSD|+] 04:332 00:051 AAPL: #[EB.CS.CSKSD|!] Err(0xE) <- RT.GV boot-info-payload 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF 04:384 00:052 AAPL: #[EB.G.CS|-?] Ok(0) 04:445 00:060 AAPL: #[EB.LD.LF|IN] 0 1 <"<null string>"> <"1"> 04:520 00:074 AAPL: #[EB.B.SBS|SZ] 723512 04:580 00:059 AAPL: #[EB|B:SHA] <966d5e3bc8a58fe6f354f044a21095ae05081193> 04:637 00:057 AAPL: #[EB.WL.PWLFNV|!] Err(0xE) <- RT.GV wake-failure 7C436110-AB2A-4BBB-A880-FE41995C9F82 04:692 00:054 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFNV 04:746 00:053 AAPL: #[EB|WL:DT] 0xffffffff 04:804 00:057 AAPL: #[EB.LD.LKC|D] <"System\Library\KernelCollections\BootKernelExtensions.kc.development"> 04:863 00:058 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"System\\Library\\KernelCollections\\BootKernelExtensions.kc.development"> 04:919 00:056 AAPL: #[EB.LD.LKC|R.2] <"System\Library\KernelCollections\BootKernelExtensions.kc"> 07:308 02:389 AAPL: #[EB.LD.LKFS|-?] Ok(0) 11:198 03:889 AAPL: #[EB.LD.LKC|-?] Ok(0) 11:251 00:053 AAPL: #[EB|BST:REV1] 11:304 00:052 AAPL: #[EB|CSR:IN] 0x00000FEF 11:357 00:053 AAPL: #[EB|CSR:OUT] 0x00000FEF 11:413 00:055 AAPL: #[EB.BST.FBS|+] 11:465 00:051 AAPL: #[EB.BST.FBS|ADSZ] 0 11:518 00:052 AAPL: #[EB.BST.FBS|KSSZ] 0 11:571 00:053 AAPL: #[EB|SB:SBGMFNS] x86legacyap.im4m 11:626 00:054 AAPL: #[EB|RH:PF] usr\standalone\OS.dmg.root_hash 11:682 00:055 AAPL: #[EB|RH:MF] <"usr\\standalone\\OS.dmg.root_hash.x86legacyap.im4m"> 11:738 00:055 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash"> <"0"> 11:794 00:056 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"usr\\standalone\\OS.dmg.root_hash"> 11:848 00:054 AAPL: #[EB.RH.LRH|P!] Err(0xE) <- EB.LD.LF 11:902 00:054 AAPL: #[EB.BST.FBS|!] Err(0xE) <- EB.RH.LRH 11:956 00:053 AAPL: #[EB|LOG:DT] 2024-01-17T13:59:58 12:011 00:054 AAPL: #[EB|LOG:EXITBS:START] 2024-01-17T13:59:58 even on Dortania, I can’t find my mistake? Phil

Hi maldon i’m trying this efi folder but no install, i use openvariableruntime.efi and I boot on logo Apple with argument verbose ?? i think problem x99 no NVRAM, is it possible? This motherboard VKTECK x99. Is same motherboard machinist x99 p33 and HUANANZHI 4mt

Hello dangchui, while trying to find a bios for this card,I downloaded mi899, but it's not there , I came across different references and this card is the same as the : Huananzhi x99-4mt . I couldn't find anything on Github for a hackintosh, here it runs under Win10, but I would also like to run it in OSX. I have already spent 3 full days trying, but impossible, still blocked at startup, I think a KP, because I can not choose to start the OSX installation. I tried everything, even with the ACPI files simple start, these files obtained by ssdttimer, I remain stuck at the same point. this is not my first hackintosh, but my sixth 1 ASUS Z8na-d6 bi-xeon X5675 : RX580 , catalina 2 Z-77-PD3 xeon E3-1270 :rx580 Monterey 3 Acer aspire A315-51-39-CD, nvme + sata ssd monterey 4 fatality1 gaming , I5-6400 hd-530 , monterey 4 Huananzfi-tf E5-2666V3 in progress : RX580 5 MSI Z690 : https://github.com/phil-audio/Hackintosh-Msi-Z690-a-pro-wifi-DDR4 , Monterey but still needs to be updated. 6 Huananzhi x99-4mt or Angxun x99 v1.1 or other name: in progress with an RX580 . but i'm not an expert, i'm looking for and trying to understand, i'd like to be able to put a tutorial on each config, but i haven't had the time yet, i'll put it on the forum and on my github. i still need to try to understand ACPI, because i see that Maldon always does this in 1 single File and i'd like to understand it. but for the moment i'd like to finish my 2 hackintosh X99, but i'm stuck. Phil Hello Maldon, I tried for 3 days full different config , but no results: here is a photo of my start and also the log of the log opencore-2024-01-14-124121.txt.zip 418000664_382985744408034_4720655186551588045_n.jpg.zip

Hi Maldon, i am test this EFI desktop hed but is not possible to boot open core. Many error i havé use maciasl and many errors ? I take acpi and dsdt by Windows with ssdttime. it’s difficult card x99p3 with e5-2666v3

Bonjour, j'ai acheté sur ALi.. une carte X99 avec son CPOu E5-2666v3 car j'avais encore 32Gb DDR3 ECC en stock. J'ai placé une carte pulse Saphyre RX580 de 8 Go qui fonctionne et est reconnue sous Mac métal. J'ai fait une installation Windows sans problème. J'ai réalisé une clé USB avec sonoma et posé dessus un opencore avec la version Desktop HEDT Haswell-E X99 mais impossible de démarrer. J'ai essayé l'EFI du H81 qui est mon chipset et le B85 mais rien à faire. c'est ma carte ( https://fr.aliexpress.com/item/1005006012933668.html?spm=a2g0o.order_detail.order_detail_item.3.249a7d56WOUpDC&gatewayAdapt=glo2fra ) nom de la carte mère : VKtech x66 H81 mon processeur : E5-2666v3 Ram DDR3 2 x 16 Go : MT36KSF2G72PZ-1G4E1FF 16 Go PC-10600 1333 MHz enregistré ECC J'ai déjà fait 3 hackintosh sous différents types de processeur ainsi que sur nootbook et desktop, jamais bloqué à ce stade j'ai 4 clé usb disponible 16go avec Mojave ,Monterey , ventura , sonoma . un peu d'aide ou d'idée serait précieuse, cordialement Phil opencore-2023-12-07-182412.txt.zip

hi, MaLdOn, I am finally on the installation of Monterey, after 40 hours of work en test. to place my 2 monitors on the Rx580 board, for the moment it turns, it is with this one that I write url=https://zupimages.net/viewer.php?id=22/46/kyb4.png][/url]

hi MaLdON, I went back to Windows to recover my ACPI extract my DSDT.AML file and I took the opportunity to look at the properties of my 2 graphics cards: RTX3080ti PCIROOT (0) PCI(0100) PCI (0000) ACPI (_sb_) ACPI (pc00) ACPI (PEG1) ACPI ( PEGP) SB PC00 PEG1 PEGP RX580 PCIROOT (0) PCI(1C04) PCI (0000) ACPI (_sb_) ACPI (pc00) ACPI (RP05) ACPI ( PXSX) SB PC00 RP05 PXSX I modified the SSDT-GPU-DISABLE file with my values for the RTX3080,attached files are my DSDT.aml and SSDT-GPU-disable-rtx3080. when I start, I am blocked on APPLEkeystoretest. ACPI.zip

hi, here, I redid everything from points 1 to 5 and I arrive at this url=https://zupimages.net/viewer.php?id=22/46/enkm.jpg][/url]

1 Bios : it's laste. : 7D25V192. 2022-10-17 2 : I'm going to set it back to default and put this: VT-D enable , CFG disable , Wifi and bluetooth on board disable , TB disable , intel speed test enable , TPM disable. 3 : I am using your file right now with your SSDT-olarila-600.aml. and I also tested with your DSDT.aml from the forum you made , I redo a new usb stick with ventura and I only place your EFI on it with only the SSDT-olarila-600.aml. 4: i use only this port , no use USB3.0. 5 : I don't know how I can achieve this, here is the photo of the motherboard where I placed my elements on it.

hi MaldOn, I have no problem wanting to donate , but I would like to have answers to my questions and so to move forward together if possible, because I already did this in the past but I did not receive any results.my config is certainly not imple but I do not believe that it remains impossible to achieve.I would like to be able to install MacOs (Monterey or Ventura) on this configuration which obviously has 2 graphics cards installed in this machine. I obviously tried a lot of EFI to guide me but unfortunately none of them have this hardware installed like me, so would you be able to guide me and be able to install MacOSX on it without having to remove this RTX3080i? After many tries, I'm stuck at this. best regards ,Phil

good morning all i return to the forum for my new hackintosh on which i block fir its installation of Ventura and this is also my first time using opencore. My configuration of my machine is planned with 2 graphics cards so that i can also run under UNRAID OS. i use each card output in displayport with the 2 identical monitors.When i boot on the Ventura OSX, the display goes to the output of the RX3080ti off i would like it to come out only on the RX580 for its compatibility with OSX. For MaLdOn : i tested your patched DSDT but i can'tget to the installation os Ventura , it block at the ACPI level. ( SSDT-OLARILA600.aml ) when i look at opencore it speaks that ACPI absolutely must have : SSDT-Plug-ALt.aml. and SSDT-AWAC-disable.aml. and SSDT-DMAC.aml. and SSDT-EC.aml. My config,Plist is MACPRO7.1 with GenSMBIOS. Motherboard. MSI Z690-A PRO Wifi DDR4. ( MS-7D25 ) bios ver E7D25IMS.192 Cpu : Intel I9-12900K Ram 2 X corsair DDR4. 3200. 16- 20-20-38 1,350v Graphique 1 on PCIE1 Gen5 RX3080TI graphique 2 on PciE2 Gen4 RX580 pulse NVME 1. : Windows 11 NVME2 : planned to install OSX NVME3 : reserved Unraid cache NVME4 : reserved Unraid VM - docker - data PCIE-5 : Fenvi card wifi/bluetooth ( Wifi on board desactived ) thanks for your help , Phil

hi MaLdon , what I wonder is in the clover config? As I have a RX580 pulse sapphire, do I have to inject ATI keys? or others chosen? this may be the problem Thank's Phil

Hi , MalDon I did what you told me, but it did not change anything, always stuck in the same place. it looks like it comes from the memories, always the same message at the end of the script . thank's Phil

Hello Maldon, I downloaded image on the torrent because more access on googledrive, I tried to install, but I have this as a message on the start, sorry I do not hackintosh, it's my first thank's Phil

good evening, as I am really newbee, I do not understand what I have to do with this version, because the files are in PKG, and under Win10 I do not know how to use it. sorry not to know , moreover, I have to use google translation because I speak french Phil