Jump to content

Recommended Posts

Posted

0x0A, 0x26, 0x22, 0x06


8086 is intel .. nothing to do with ig-platform-id


u can try others like this one..


0x06, 0x00, 0x26, 0x0a


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Posted

Well, I've BIG problem.


I don't know what happened, but out of a sudden sleep refused to work again neither with clean dsdt, nor with the one that worked earlier.


The system prepare for sleep with screen off for 30-40 seconds. It powers down to a 'sleep-like' state then wakes up immediately but not to desktop, it reboots. It reboot and try to wake up from a hibernate and fail to boot.


This is from Console about sleep:

Sep 28 18:39:17 localhost kernel[0]: ACPI: sleep states S3 S4 S5
Sep 28 18:39:22 Lenovo-PC.local discoveryd[49]: Basic SleepProxy BSP Server Disabled. Metric = 3373
Sep 28 18:39:22 Lenovo-PC.local discoveryd[49]: Basic SleepProxy Could not get the primary interface
Sep 28 18:39:22 Lenovo-PC.local discoveryd[49]: Basic SleepProxy Sleep Proxy Server is not enabled
Sep 28 18:41:23 localhost kernel[0]: ACPI: sleep states S3 S4 S5
Sep 28 18:41:23 localhost kernel[0]: Sleep failure code 0x00000101 0x1f006700
Sep 28 18:41:29 Lenovo-PC.local discoveryd[49]: Basic SleepProxy BSP Server Disabled. Metric = 3373
Sep 28 18:41:29 Lenovo-PC.local discoveryd[49]: Basic SleepProxy Could not get the primary interface
Sep 28 18:41:29 Lenovo-PC.local discoveryd[49]: Basic SleepProxy Sleep Proxy Server is not enabled

 

This is from Console about wake:

Sep 28 18:39:21 localhost apsd[50]: Attempt to set push wake topics without dark wake enabled: ()
Sep 28 18:39:35 Lenovo-PC.local apsd[50]: Attempt to set push wake topics without dark wake enabled: ()
Sep 28 18:39:36 Lenovo-PC.local apsd[50]: Peer [pid=330] requested push wake but lacks APSPushWakeEntitlement
Sep 28 18:41:28 Lenovo-PC.local apsd[50]: Attempt to set push wake topics without dark wake enabled: ()
Sep 28 18:41:46 Lenovo-PC.local apsd[50]: Attempt to set push wake topics without dark wake enabled: ()
Sep 28 18:41:47 Lenovo-PC.local apsd[50]: Attempt to set push wake topics without dark wake enabled: ()
Sep 28 18:41:47 Lenovo-PC.local apsd[50]: Peer [pid=329] requested push wake but lacks APSPushWakeEntitlement

 

This is from command pmset -g log:

Sleep/Wakes since boot at 2014-09-28 18:07:27 +0100 :0   Dark Wake Count in this sleep cycle:0

Time stamp                Domain              	Message                                                                    	Duration  	Delay     
==========                ======              	=======                                                                    	========  	=====     
UUID: (null)
2014-09-28 18:39:20 +0100 Start               	powerd process is started                                                  	          
2014-09-28 18:39:20 +0100                     	Summary- [system: No Assertions] Using AC                                  	          
2014-09-28 18:39:37 +0100 BatteryHealth       	Battery health: Good; was: Poor                                            	          
2014-09-28 18:40:01 +0100 Notification        	Display is turned off                                                      	          
2014-09-28 18:40:01 +0100 Assertions          	PID 50(apsd) Summary ApplePushServiceTask "com.apple.apsd-login" 00:00:27  id:0xb00000148 [system: BGTask]	          
2014-09-28 18:40:01 +0100 Assertions          	PID 16(UserEventAgent) Summary BackgroundTask "com.apple.metadata.mds.power" 00:00:30  id:0xb00000144 [system: BGTask]	          
2014-09-28 18:40:01 +0100 Assertions          	PID 27(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00  id:0xd0000015c [system: BGTask SRPrevSleep kCPU]	          
2014-09-28 18:40:16 +0100 Assertions          	PID 27(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15  id:0xd0000015c [system: BGTask SRPrevSleep kCPU]	          
Sleep/Wakes since boot at 2014-09-28 18:39:20 +0100 :0   Dark Wake Count in this sleep cycle:0

Time stamp                Domain              	Message                                                                    	Duration  	Delay     
==========                ======              	=======                                                                    	========  	=====     
UUID: C0DDB862-5488-45A5-A176-41E9D5B9B865
2014-09-28 18:40:16 +0100 Sleep               	Entering Sleep state due to 'Software Sleep pid=66': Using AC (Charge:100%) 	          
2014-09-28 18:40:36 +0100 Assertions          	PID 16(UserEventAgent) Released BackgroundTask "com.apple.metadata.mds.power" 00:01:05  id:0xb00000144 [system: BGTask]	          
2014-09-28 18:40:44 +0100 Wake Requests       	[*proc=discoveryd request=Maintenance inDelta=6452]           
2014-09-28 18:40:44 +0100 PM Client Acks      	Delays to Sleep notifications: [com.apple.apsd timed out(28000 ms)]           
Sleep/Wakes since boot at 2014-09-28 18:39:20 +0100 :1   Dark Wake Count in this sleep cycle:0

Time stamp                Domain              	Message                                                                    	Duration  	Delay     
==========                ======              	=======                                                                    	========  	=====     
UUID: (null)
2014-09-28 18:41:26 +0100 Start               	powerd process is started                                                  	          
2014-09-28 18:41:26 +0100                     	Summary- [system: No Assertions] Using AC                                  	          
Sleep/Wakes since boot at 2014-09-28 18:41:26 +0100 :0   Dark Wake Count in this sleep cycle:0

Time stamp                Domain              	Message                                                                    	Duration  	Delay     
==========                ======              	=======                                                                    	========  	=====     
UUID: Unknown UUID
2014-09-28 18:41:26 +0100 Failure             	Sleep Failure [code:0x1011F006700]:                                        	          
2014-09-28 18:42:34 +0100 Assertions          	PID 16(UserEventAgent) Released BackgroundTask "com.apple.metadata.mds_stores.power" 00:01:02  id:0xb00000139 [system: BGTask]	          
2014-09-28 18:42:48 +0100 Assertions          	PID 16(UserEventAgent) Released BackgroundTask "com.apple.metadata.mds.power" 00:01:17  id:0xb00000138 [system: BGTask]	          
2014-09-28 18:43:16 +0100 Assertions          	PID 50(apsd) Released ApplePushServiceTask "com.apple.apsd-login" 00:01:31  id:0xb0000014a [system: BGTask]	          

2014-09-28 18:44:03 +0100 :Showing all currently held IOKit power assertions
Assertion status system-wide:
  BackgroundTask                 0
  ApplePushServiceTask           0
  UserIsActive                   0
  PreventUserIdleDisplaySleep    0
  PreventSystemSleep             0
  ExternalMedia                  0
  PreventUserIdleSystemSleep     0
  NetworkClientActive            0
Kernel Assertions: 0x4=USB
  id=500  level=255 0x4=USB mod=28/09/2014 18:45 description=EHC2 owner=AppleUSBEHCI
  id=501  level=255 0x4=USB mod=28/09/2014 18:45 description=EHC1 owner=AppleUSBEHCI

 

Just a note: AppleLPC is not loaded in kextstat. Should I post other info?


Thanks

Specs: Intel Core i7-4700MQ 2.4GHz, 12GB RAM, 1TB HDD + 8GB SSD, 2x2GB Nvidia SLI GT755m, WiFi + BT Broadcom BCM4352 (replaced stock BCM43142).

Operating Systems: Microsoft Windows 8.1 x64 and Mac OS X 10.10 Yosemite Beta 3

Bootloader: Clover EFI

Posted

Thanks for the reply.


I applied 7-series/8-series usb, Haswell LPC, and SMBUS Fix from Rehabman repository.


AppleLPC loaded OK

No more EHC1/2 assertions.


System does show the same console output for sleep or wake.

Sleep fails with error code:0x1011F006700 then I find clover want to wake OS X from hibernate.

Why does it go for hibernate instead of soft sleep?

Specs: Intel Core i7-4700MQ 2.4GHz, 12GB RAM, 1TB HDD + 8GB SSD, 2x2GB Nvidia SLI GT755m, WiFi + BT Broadcom BCM4352 (replaced stock BCM43142).

Operating Systems: Microsoft Windows 8.1 x64 and Mac OS X 10.10 Yosemite Beta 3

Bootloader: Clover EFI

Posted

Hello, I'm now on a Distro because the Audio is working there. I have ALC1200 on board with a Acer FX58M Board..

I can install the system with unishit but no audio. With My Hack i stuck on a black screen at start of install.. Next I'll try a vanilla installation


The problem 1: Sleep its not working, its shutdown (because the nullpc....kext is active/ I'm right?, from the same reason the speedstep don't work)

I Try to make a smbiosplist and delete the nullpcpower.. but my pc freezes 30 sec after start. I try to patch the AppleInterCPU...kext but no luck..

The problem 2: I can't make my Audio to work and I'm not sure if the GTX650 is install properly. In this distro it work but on vanilla install i consider that it will work.


Can somebody help me to patch my dsdt/ssdt and edit my smbiosplist please? Im now over 10 days trying to run everything right but without success and if not somebody help me I'm trow everything away.


(For some reason MaciASL don't work in this distro i run now, and the runme script its stuck to in first point.. But i have export my dsdt/ssdt in windows using Aida and compile it without errors (last time that iv been on unishit install), all infos with spy-z (Windows) and some info about the processor, see Attachment)


greetings from Switzerland, and Thanks

AspireM7220.zip

Posted

hello


no idea .. it don't work just for u ..


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Posted

I have a Dell E5410 i installed successfully 10.9.5 i have all useful kexts like sound, wifi but my problem is the graphics card intel hd graphics (iron lake ). I tried all the kext from the internet an i can not enable CI, i know that my display connector is EDP so no QE/CI. So in conclusion is there a way to patch my dsdt to make my graphics work. Thanks for reading my post and i hope someone will answer.

Send me Gireada’s Mac Pro.zip

Posted

hello


use clover to boot the system .. and u must read about what u trying to do..


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Posted

Hi,

I need help .I've just bought a new laptop of following specs. Please somebody patch my dsdt. I want to install Mavericks...


My specs

HP Pavilion 15-n207tu

Chipset = Intel HM76 Express Chipset LPC Controller

Processor = Intel Core i3-3217u @ 1.8GHZ

Ram = 4GB 1600mhz

HDD = 500GB

Graphics = Intel HD 4000



I've attached my extracted dsdt

DSDT.aml.zip

Posted

@prajal_s


hello


test this one


should have usb native


ig-platform-id 0x01660003


hdef layout 1


sata


lpc


plnf


smbus

 

DSDT.aml.zip

 

good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Posted

@hackintosher123


hello


test this one


but u have a lot to read..


first ur smbios is wrong .. u have a notebook and are using macpro3,1 smbios .. is from a old desktop


forget the use of " beast " tools


the amd don't work .. only work hd 4000


http://Olarila.com/forum/viewtopic.php?f=28&t=1716


http://Olarila.com/forum/viewtopic.php?f=28&t=1703


http://Olarila.com/forum/viewtopic.php?f=28&t=3111


should have usb native .. without the use any extra kext


the dsdt inject ig-platform-id 0x01660003 for the intel hd 4000


sata

smbus

plnf

imei

 

DSDT.aml.zip

 

only hope u read and gave good use to it


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Posted

Need my DSDT patched for acpi battery status , using the Acer 5740G patch found here http://Olarila.com/forum/packs.php. used voodoo battery in Mavericks , doesn't work in Yosemite , the AppleACPIPlatform.kext thats comes with it causes issues,

patched and unpatched DSDT and patch i used in .zip

any help appreciated :)

Send me.zip

CPU: Intel Core i3 330M / 2.13 GHz

Chipset: Mobile Intel HM55 Express

Graphics: ATI Mobility Radeon HD 5470

MB: Acer Aspire 5740G

Posted

Thanks heaps for that !! Perfect ! :):):)

CPU: Intel Core i3 330M / 2.13 GHz

Chipset: Mobile Intel HM55 Express

Graphics: ATI Mobility Radeon HD 5470

MB: Acer Aspire 5740G

Posted

Hi I'm french guy and i don't really speak english...

I'm new in the world of hackintosh . My problem is: After having installed maverick , my Acer 8730ZG worked. Since my installetion Yosemite is no longer the case . The battery is not recognized and my boot is not very stable. After some research on the internet I saw that a change was necessary dsdt . I sent you send me in which I included the extraction dsdt.dsl my bios .


Édit : I just added that Wake does not work, the screen remains stubbornly black


Thank you in advance for your answer. :D

Send me MacBook Pro de 3k1n0Xtr8M 2.zip

Posted

@Ekino


hello


there it is


leave the use of that " beast " tools .. u will never get a good hack using that


http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

 

DSDT.aml.zip

 

use also this for bat https://bitbucket.org/RehabMan/os-x-acpi-battery-driver/downloads


good hack

PB Easy Note TM 86 - i5 430 M - H55M - Ram - 6 GB - Alc272 - Radeon HD 5470 512 QE/CI

Lenovo G500 - i5 3230m - HM77 - Ram - 8 GB - Conexant audio - HD 4000

My OS X Files 

Posted

Hi all,


I'm running OS X 10.10 on my Lenovo Y510P. I've been trying to fix many things and got some success but I have few problems regarding display sleep. Any action that set display to sleep (via hot corners for example) results in these problems when display return on:

 

  • Restart is not functioning (system halt with display off but fan and light are on). Shutdown works fine though.
  • Graphics are partially distorted like reverting to 16-bit colors and it's very noticable in launchpad and while playing videos. Only fixed by turning system off/on again. (Screenshoot)

 

Though I was able to fix my DSDT to sleep/wake successfully, the display sleep issue affects the whole system sleep/wake since it's part of the process. Please help me to figure out how to solve these (just hints no need to patch anything for me, I need to understand).


Currently I've few edits on my DSDT. Graphics (mobile IntelHD 4600) is patched through Clover (in addition to patching OpenCL). Attached is my clean ACPI, my currently modefied ACPI, and SendMe zip.


Regards,

Ahmed

ACPI-Clean.zip

ACPI-Patched-Current.zip

Send me Lenovo-PC.zip

Specs: Intel Core i7-4700MQ 2.4GHz, 12GB RAM, 1TB HDD + 8GB SSD, 2x2GB Nvidia SLI GT755m, WiFi + BT Broadcom BCM4352 (replaced stock BCM43142).

Operating Systems: Microsoft Windows 8.1 x64 and Mac OS X 10.10 Yosemite Beta 3

Bootloader: Clover EFI

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...