DSDT patch requests

[gilgamet]

Hum i say it in the first post , and i don't know what idk does measn (now i understand) so

my wifi and bt card is a dw1820A bcm 94350zae(m2 ngff)

 

1: hdmi makes my laptop freeze

2: bought a dw1820a (bcm94350zae) and it freeze with this message : acpiBatteryManagement WARNING Fmaxcapacity > fdesigncapacity adjusted fmaxcapacity from 4127 to 4828

 

Thanks

[onemanosx]

bought a dw1820a (bcm94350zae) and it freeze with this message : acpiBatteryManagement WARNING Fmaxcapacity > fdesigncapacity adjusted fmaxcapacity from 4127 to 4828

This message is with reference to your battery.

[MaLd0n]

[ref]mashuk12[/ref], DSDT.aml.zip

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

Added in 24 minutes 18 seconds:

[ref]Nypa[/ref], fan control via system? u need control it via bios/uefi

check here about intel quick sync

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

Added in 8 minutes 32 seconds:

[ref]bonejoev[/ref], use this version

https://Olarila.com/files/Utils/MaciASL.app.zip

check, one example, use a apple calculator with advanced mode

1-

2-

3-

0x0c = 12

0x0c, 0x00 0x00 0x00

Added in 4 minutes 15 seconds:

[ref]bradipo666[/ref], DSDT.aml.zip

 

Added in 5 minutes 35 seconds:

[ref]Macosus[/ref],

use a voodooi2c kexts, reboot and extract new send_me

Arquivo Comprimido.zip

DSDT.aml.zip

[bonejoev]

damn Mald0n, you can sure make someone feel like a programmer, most of this stuff went right over my head. I will use that MaciASL from now on. but I already fix sound just by using config.plist. the only thing that I need your help on brother, so I can leave you alone for a while is just sleep. like I said it goes to sleep but when I wake it up the screen stays dark but I think the laptop is not functional at that point. thanks, this is a great site props for all of you guys that make it possible, been messing with Hackintosh since my teens years, is a culture for me.

[rmdg88]

Hello and thank you for all the support.

Can someone have a look to my files and improve them?

"imac" 18,2

macOS 10.14.4

gigabyte gaming 5 z370, bios version f10

intel hd630 + sapphire rx 560 2gb

 

Send me rmdg.zip

[MaLd0n]

[ref]daovanhoi[/ref], CLOVER.zip

 

Added in 10 minutes 59 seconds:

[ref]bonejoev[/ref], need check what cause it

u put a correct config with hackintool?

here]

Added in 2 minutes 51 seconds:

[ref]rmdg88[/ref], DSDT.aml.zip

[bonejoev]

I haven't used the hackingtool, should I set the same values as the picture you posted? because right now this is what I have

https://mega.nz/#!dhVhxYBQ!eTxw_zjhj8yHtWdH4YS7uS-H_1igjgMMeAr73ZjdhF8

https://mega.nz/#!VgcRnQrB!00zcM5TBzKJK0X-zc5U2RFFNCBMzBB8h5H7i6i349Aw

[Macosus]

use a voodooi2c kexts, reboot and extract new send_me

Thank you so much for your help and your generosity [ref]MaLd0n[/ref], . I've a question if you don't mind when can I get VoodooI2C kexts. Your Patche work perfect. However the (Fn+ F5) and (Fn + F6) controlling the brightness of the screen not working.

Update: I've install VoodI2C ( doesn't resolve the problem ...) from the following link and attached the send me file:https://github.com/hieplpvip/VoodooI2C/releases

Send me MacBook-Pro.zip

Edited March 30, 2019 by Guest

[RoyalFluzh]

Added in 3 minutes 59 seconds:

[ref]RoyalFluzh[/ref], DSDT.aml.zip

remove FakePCIID_XHCIMux.kext

and use it too

change ECDV to EC
45434456 
45435f5f 

 

when i use this, my usb mouse, ext wifi n sound doesn't work. verbose mode still showing error too

[daovanhoi]

daovanhoi,

CLOVER.zip

(2.17 MiB) Downloaded 1 time

Thanks Bro!

[telepati]

[ref]telepati[/ref], CLOVER.zip

use only it with last clover version

dont need exclude nothing

 

Hi, MaLd0n there are some problems. I used files with r4911. I don't want to change to clover version to r4914 before to ask you.

Wifi drops in all the time. Before the DSDT no problem with my Wifi, cause my combo Wifi-BT card is natively working without any problem or modify.

On Clover Screen when I click to F4 machine freezes. I am making force reset from the case.

Can't hide Windows EFI drives (I can hiding APFS Preboot but when I write Windows on hiding section in clover configurator it doesn't affect anything.)

Processor shows Unknown. I know new SMBIOS for 9900k still didn't release yet. I just want to ask is it normal to see as an Unknown? Does DSDT affect, when we change SMBIOS?

BTW I forgot about the BIOS setting which I used;

M.I.T.

Extreme Memory Profile (X.M.P.) → Profile 1

BIOS

Windows 8/10 Features → Other OS

CSM Support → Disabled

Secure Boot → Disabled

Peripherals

Initial Display Output → PCIe Slot 1

Intel Platform Trust Technology (PTT) → Disabled

Serial Port → Disabled

USB Configuration

Legacy USB Support → Auto

XHCI Hand-off → Enabled

Network Stack → Disabled

Chipset

Vt-d → Disabled

Internal Graphics → Enabled

DVMT Pre-Alloc → 64M

DVMT Total Gfx Mem → 256M

Audio Controller → Enabled

Above 4G Decoding → Enabled

I attached new send me.

Send me Murats-iMac-Pro.zip

Edited March 31, 2019 by Guest

[mateomm22]

Here is my file.

Thanks.

send-me.zip

[guypage]

Hey people, any help with this would be great! Thank you

 

Send me Guys-iMac.zip

[erroruser]

[ref]guypage[/ref], here is the clover folder for your main drive dsdt has not been completed yet

CLOVER.zip

[Subsystems]

[ref]Subsystems[/ref], use only it with last clover version

CLOVER.zip

after reboot extract new SEND_ME

Here it is mate. I've made a few tweaks, check it out...

send_me.zip

[Kylergib]

So I just did a new install of Mojave on my computer. I am attempting to go through and get things working one by one. The first thing I'm trying to get working is my touchpad, which is an ELAN 1201 and according to the gitter page from voodooI2C it only supports the polling method. I would love if someone can help me with this and then if I can get that fixed, I will move on to the rest of the patches I need.

Send me Kyles-MacBook-Pro.zip

[MaLd0n]

[ref]bonejoev[/ref], in ur case use macbookpro

Added in 2 minutes 31 seconds:

[ref]Macosus[/ref], u need use it, reboot and extract files, i need put a _dsm into device

Arquivo Comprimido.zip

 

Added in 56 seconds:

[ref]RoyalFluzh[/ref], u need post new files

Added in 2 minutes 2 seconds:

[ref]telepati[/ref], use AirportBrcmFixup.kext

processor, use cpu type 0x0a05

the other options is about clover

Added in 3 minutes 30 seconds:

[ref]mateomm22[/ref], DSDT.aml.zip

 

Added in 3 minutes 56 seconds:

[ref]guypage[/ref], DSDT.aml.zip

 

Added in 2 minutes 7 seconds:

[ref]Subsystems[/ref], looks good, what do u think?

Added in 6 minutes 9 seconds:

[ref]Kylergib[/ref], DSDT.aml.zip

 

use voodooi2c kexts with my dsdt, reboot and extract new send_me

DSDT.aml.zip

DSDT.aml.zip

[Subsystems]

[ref]MaLd0n[/ref], Looks good but, what about Thunderbolt (I have it connected on the mobo but turned off in BIOS)?

Can you help me with Wi-Fi drivers as well?!

Thanks in advance!

[MaLd0n]

[ref]Subsystems[/ref], TBH just update software via windows and after it work in macos

what wifi card?

[Subsystems]

[ref]MaLd0n[/ref], this mobo brings one wifi onboard device. Do you have any idea on how to activate that?

[Kylergib]

[ref]MaLd0n[/ref], here is the new runme file and I put the DSDT file in the patched folder. Also, I installed the voodooi2c kext in the kext/others/ folders. Unsure if it should be in the system/library/extensions/ or not.

Send me Kyles-MacBook-Pro.zip

[mskyway]

... how do i use the dsdt you sent me? i searched but no clue !!

Ok x 8700

[Kylergib]

[ref]mskyway[/ref], you put the dsdt.aml file into efi/clover/ACPI/patched/ folder.

[MaLd0n]

[ref]Subsystems[/ref], wifi onboard don't work, put one broadcom with support

Added in 1 minute 58 seconds:

[ref]Kylergib[/ref], delete old send_me file in ur desktop or app merge files

Added in 20 seconds:

[ref]mskyway[/ref], clover/acpi/patched

[Macosus]

u need use it, reboot and extract files, i need put a _dsm into device

Please [ref]MaLd0n[/ref], that doesn't resolve the problem ( the touchpad still not working)... Also I forgot to mention that when my Hackintosh enter to sleep mode the mousse stop working so I have to reboot my Hackintoosh ...