DSDT patch requests

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

MaLd0n · March 16, 2019

[ref]bonejoev[/ref], rec one movie, i need check what cause it

kubade220 · March 16, 2019

[ref]kubade220[/ref], battery check rehabman repo

black screen check a hackintool, have a full solution

https://Olarila.com/forum/viewtopic.php?f=62&t=9275

now wake works fixed yours Hackintool and I have problem with works second monitor by HDMI kernel panic light sensor not work could you help me ? please

MaLd0n · March 16, 2019

[ref]kubade220[/ref], extract new send_me

vikopromotion · March 16, 2019

I followed the battery patch instruction but after patch it doesn't show battery icon anymore and don't have selection about show battery icon. Can you help me this problem ?

MaLd0n · March 16, 2019

[ref]vikopromotion[/ref], check if [ref]onemanosx[/ref] can help u

bonejoev · March 16, 2019

thanks Mald0n, here it is... but now something else comes up, instead of Attempting MACH Reboot

https://mega.nz/#!YtF1TCrZ!8wRL7KJxbRLCzx9WbMWFoR4tRw7S7A1OXqPRA2qSzwU

hinatakanashi · March 16, 2019

hello admin

my friend just taught me to install hackintosh,

please patch for me this file. thanks for all. my English not well sorry.

Send me MBP-cua-hina.zip

kubade220 · March 16, 2019

[ref]kubade220[/ref], extract new send_me

summarizing: after patching by Hackintool I destroy gpu settings brightness kernel panic and second monitor by HDMI don't work if the monitor is disconnected, the computer gets freaked out but sleep/wake works perfectly and very nicely reboots as it should that is, not first the black screen only transparent and then nicely closes just the opposite I can not combine these two things.Send me MacBook-Pro-Kuba.zip

matchingoutfits · March 16, 2019

Thanks! Much appreciated

Having issues with tuning, and lost on what to do.

Send me Matchingoutfitss-iMac.zip

Wizzard · March 16, 2019

Hi, there, I finally managed to run runme, so hope somebody will help me with my HW (especially sound and battery status)

Thank you very much!

Send me MacBook-uzivatela-Wizzard.zip

MaLd0n · March 16, 2019

[ref]bonejoev[/ref], sound like need a LAPIC FIX, try it

if don't work, drop DSDT, press O key in Clover boot screen, go to Acpi Patching, DSDT Name and use bios.aml

Added in 5 minutes 16 seconds:

[ref]hinatakanashi[/ref], DSDT.aml.zip

-Battery if don't work

https://Olarila.com/forum/viewtopic.php?f=28&t=8208

Added in 3 minutes 16 seconds:

[ref]kubade220[/ref], check if pnlf from clover work

DSDT.aml.zip

have some instructions here

https://github.com/acidanthera/WhateverGreen/commit/8a8362078da90d4ec70aacd70adf1a853ac1d870

Added in 5 minutes 7 seconds:

[ref]matchingoutfits[/ref], DSDT.aml.zip

Added in 19 minutes 6 seconds:

[ref]Wizzard[/ref], CLOVER.zip

use it, reboot and extract new send_me

DSDT.aml.zip

Wizzard · March 16, 2019

MaLd0n, thank you very much! I used the contents of zip and sending new send_me.

Send me MacBook-uzivatela-Wizzard.zip

MaLd0n · March 16, 2019

[ref]Wizzard[/ref], check if work

CLOVER.zip

Added in 6 minutes 31 seconds:

[ref]Wizzard[/ref], use only this clover folder, u don't need many this in ur old clover folder

Wizzard · March 16, 2019

I tried to copy all the contents to my clover folder, but the display was turned off a while after an apple logo showed up. Not I am running with my backed config.plist, but will try also with clean clover folder and this zip.

edit: so I deleted my clover folder from EFI and copied the one from your zip, the same result, black display after logo shown. I backed up my config.plist, so when I boot it, I can boot.

Edited March 16, 2019 by Guest

MaLd0n · March 16, 2019

[ref]Wizzard[/ref], ok, use ur clover folder wioth this files, just change a dsdt, i added new patches for I2C devices

kubade220 · March 16, 2019

[ref]bonejoev[/ref], sound like need a LAPIC FIX, try it

if don't work, drop DSDT, press O key in Clover boot screen, go to Acpi Patching, DSDT Name and use bios.aml

Added in 5 minutes 16 seconds:

[ref]hinatakanashi[/ref], DSDT.aml.zip

-Battery if don't work

https://Olarila.com/forum/viewtopic.php?f=28&t=8208

Added in 3 minutes 16 seconds:

[ref]kubade220[/ref], check if pnlf from clover work

DSDT.aml.zip

have some instructions here

https://github.com/acidanthera/WhateverGreen/commit/8a8362078da90d4ec70aacd70adf1a853ac1d870

Added in 5 minutes 7 seconds:

[ref]matchingoutfits[/ref], DSDT.aml.zip

Added in 19 minutes 6 seconds:

[ref]Wizzard[/ref], CLOVER.zip

use it, reboot and extract new send_me

its not work ;/

Wizzard · March 16, 2019

[ref]Wizzard[/ref], ok, use ur clover folder wioth this files, just change a dsdt, i added new patches for I2C devices

Sorry, I am still a newbie, which DSDT should I change? Now I run my backed up config.plist, cause the another config.plist from zip you uploaded did not boot correctly (blank screen).

MaLd0n · March 16, 2019

[ref]kubade220[/ref], u need check a correct value, now whatevergreen generate it

check

https://github.com/acidanthera/WhateverGreen

Added in 1 minute 9 seconds:

[ref]Wizzard[/ref], here, replace in clover/acpi/patched

DSDT.aml.zip

the screen problem is about video, but i see video is load in last ioreg

Wizzard · March 16, 2019

Thanks! I used that file, but still have problem with booting that config.plist you uploaded, but the one you uploaded before was working fine. So still using my backed config. No sound yes, but it least I can boot

MaLd0n · March 16, 2019

[ref]Wizzard[/ref], ye, use last dsdt with ur config.plist and extract new send_me

kubade220 · March 16, 2019

https://github.com/acidanthera/WhateverGreen

ye I know and I have it

maybe I should choose appropriate Boot arguments from whatevergreen. I have no idea how to do it.

Wizzard · March 16, 2019

Maldon, thank you for your patience!

Send me MacBook-uzivatela-Wizzard.zip

Edited March 16, 2019 by Guest

bonejoev · March 16, 2019

I can see that something is happening, but still stuck here is the video with kernelLAPIC also when I do the BIOS.aml gives me more error but like PNOT ... I can't see clear because it become distorted.

https://mega.nz/#!Q5UXkC6C!wCAK161YC7PfSSQr69xh0MaT0GrBYTFwm_f44zcLnxg

MaLd0n · March 16, 2019

[ref]kubade220[/ref], check

Added in 2 minutes 43 seconds:

[ref]Wizzard[/ref], use it in config.plist,

--Prevent Apple I2C

com.apple.driver.AppleIntelLpssI2C
5355394C 6158513D
5355394C 61584D3D
Prevent Apple I2C kexts from attaching to I2C controllers

com.apple.driver.AppleIntelLpssI2CController
5355394C 6158513D
5355394C 61584D3D
Prevent Apple I2C kexts from attaching to I2C controllers

check info plist patch

Added in 2 minutes 24 seconds:

[ref]bonejoev[/ref], hmm, sound like a usb problem, the boot is from USB or SSD/HDD?

tiopower · March 16, 2019

[ref]kiril777[/ref], extract new SEND_ME

Added in 1 minute 42 seconds:

[ref]vikopromotion[/ref], battery https://Olarila.com/forum/viewtopic.php?f=28&t=8208

sleep, check here

https://Olarila.com/forum/viewtopic.php?f=62&t=9275

Added in 3 minutes 51 seconds:

[ref]Anuloges[/ref], nice iMac name

DSDT.aml.zip

Added in 42 seconds:

[ref]nabatti99[/ref], https://Olarila.com/forum/viewtopic.php?f=62&t=9275

Added in 4 minutes 15 seconds:

[ref]Sudeki[/ref], DSDT.aml.zip

Added in 7 minutes 41 seconds:

[ref]tiopower[/ref], DSDT.aml.zip

Thanks you very much, only a question, where put the file?

Sign In

DSDT patch requests

Recommended Posts

MaLd0n

kubade220

MaLd0n

vikopromotion

MaLd0n

bonejoev

hinatakanashi

kubade220

matchingoutfits

Wizzard

MaLd0n

Wizzard

MaLd0n

Wizzard

MaLd0n

kubade220

Wizzard

MaLd0n

Wizzard

MaLd0n

kubade220

Wizzard

bonejoev

MaLd0n

tiopower

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity