DSDT patch requests

[MaLd0n]

[ref]mac944[/ref], work good too

u can disable igpu, ur amd made all work with shikigva=128

[Aelinger]

[ref]MaLd0n[/ref], hi : ) Is there a chance you can help me? Or guide me to find the solution myself?

Best

[Anadoliev]

Hi can you help me too. My system does not recognize my cpu model and the PCI device.

http://s000.tinyupload.com/?file_id=67926844431929154149

CPU: Intel I7 6700

Motherboard: Asrock Z170 Pro4S

GPU: Sapphire Nitro Vega56(recognized in "About this Mac but not in the System report/PCI")

[whynox]

Hi, I allready had a OSX running on this machine perfectly, but Olarila guide looks so clean that I made it a fresh install with MOJAVE Vanilla.

Everything looks fine, like befor: Audio, HDDs, USB... only my Intel/Atheros Network doesnt work. It could be a Kext problem?

Here are my DTST request from the Guide. Can somebody help me? I need some directions with this forum where do I can improve my knowledge about Olarila builds?

My info

Intel Hasswell Core i5 4400 / 8GB DDR / SSD 120GB Sandisk

Gigabyte GA-H87N-WIFI (fully works, only wifi is not supported).

http://s000.tinyupload.com/download.php?file_id=54814128039695129717&t=5481412803969512971781646

Sorry for the questions, can anyone help with this part of tutorial about DSDT? THX! ---

[fbarboza]

[ref]fbarboza[/ref], o seu vídeo já está ativado, se realmente funcionar via Intelhd só tem de trocar os connectors, abra o hackintool, aba Patch/Connectors com o monitor externo conectado, veja se ele aparece lá, geralmente fica em vermelho

Added in 7 minutes 15 seconds:

DSDT.aml.zip

 

Boa noite Daniel,

Verifiquei e realmente as conexões estão todas la. HDMI, DP, mas não estão em vermelho.

Qual configuração devo colocar la para ativar?

Segue a imagem: https://ibb.co/YP3jYFy

Att,

Fabio

[jeffrjbra]

 

Ao excluir o ACPIBatteryManager.kext e incluir o VirtualSMC.kext

o sistema carrega lentamente na tela da maçã...e logo em seguida

mostra o sinal de "Proibido"

ao trocar pelo ACPIBattery novamente, o sistema da boot normalmente...

[mac944]

[ref]mac944[/ref], work good too

u can disable igpu, ur amd made all work with shikigva=128

 

Thanks MaLd0n, unfortunately I've just hit a problem. I've not changed any settings since updating to your optimised EFI. I ran some benchmarks and signed in to iCloud and then shutdown. I just tried to boot to look at disabling IGPU as suggested but I'm now getting a 'Couldn't allocate runtime area' message. My usb boot drive doesn't help. Any ideas?

[MaLd0n]

[ref]Aelinger[/ref], hey, what u need?

Added in 40 seconds:

[ref]fbarboza[/ref], vc pode tentar esse patch

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
		<dict>
			<key>AAPL,ig-platform-id</key>
			<data>AAAWWQ==</data>
			<key>enable-hdmi20</key>
			<data>AQAAAA==</data>
			<key>framebuffer-con1-busid</key>
			<data>BQAAAA==</data>
			<key>framebuffer-con1-enable</key>
			<data>AQAAAA==</data>
			<key>framebuffer-con1-flags</key>
			<data>hwEAAA==</data>
			<key>framebuffer-con1-index</key>
			<data>AQAAAA==</data>
			<key>framebuffer-con1-pipe</key>
			<data>CQAAAA==</data>
			<key>framebuffer-con1-type</key>
			<data>AAgAAA==</data>
			<key>framebuffer-con2-enable</key>
			<data>AQAAAA==</data>
			<key>framebuffer-con2-index</key>
			<data>/////w==</data>
			<key>framebuffer-patch-enable</key>
			<data>AQAAAA==</data>
			<key>framebuffer-pipecount</key>
			<data>AgAAAA==</data>
			<key>framebuffer-portcount</key>
			<data>AgAAAA==</data>
		</dict>

 

esse patch é muito pessoal, vc tem de ir trocando e testando

Added in 1 minute 24 seconds:

[ref]mac944[/ref], igpu disable cause this error? try remove shikigva bootarg

[mac944]

[ref]mac944[/ref], igpu disable cause this error? try remove shikigva bootarg

I've managed to boot back in, changed vt-d = on and DVMT = 96mb.

I've since booted in again but disabled vt-d again and disabled IGPU in bios.

DVMT option no longer appears in bios.

[Aelinger]

[ref]MaLd0n[/ref], Thank you for your time,

 

Hi, and thanks for your help.

http://s000.tinyupload.com/?file_id=63357493281106679403

OSX boot, but freez and crash. I just saw that a user talks about the resolution of his screen, so I give mine in case it's important. 3440x1440

 

I have had my hackintosh for a year but I have apparently missed a few things since then I have bug. My osx freez and crash.

I have Update Bios, use clover folder for my chipset, reboot and run runme.app and up fils

I need help

[MaLd0n]

[ref]mac944[/ref], change only minimal things, csm and things for tbh

Added in 52 seconds:

[ref]Aelinger[/ref], CLOVER.zip

u need enable IntelHD Graphics for hardware accel

check here

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

[Cclown98]

 

Hello Mald0n I do appreciate your help in advance, usb is not working properly.

http://s000.tinyupload.com/index.php?file_id=38443743104451480208

Thank you so much

 

is it posible you can help me with this one please ?

[Aelinger]

Added in 52 seconds:

[ref]Aelinger[/ref], CLOVER.zip

u need enable IntelHD Graphics for hardware accel

check here

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

 

Thx, i have my IntelHD in "auto", enable is better ?

[JohnM]

This is my first attempt at building a hackintosh, it is only with help from reading the forum and downloading an EFI folder that I have got this far. My system seems to work but immediately restarts on shutdown.

I have run the "run me" program and uploaded the result. It may be of little use as my EFI folder is still on a USB at present. If I need to change this to the ssd please let me know. Thanks again.http://s000.tinyupload.com/download.php?file_id=16819149704323866768&t=1681914970432386676822020

[mac944]

[ref]mac944[/ref], change only minimal things, csm and things for tbh

I've optimised the Bios setting and have double checked settings for Mac OS. I've disabled IGPU and removed shikigva=128 boot arg.

It's now booting up fine and on initial inspection appears to be working, however under System Profile and Thunderbolt it's empty. I believe the Z390 Designare Thunderbolt should work with Catalina?

On another note, DVMT is missing from bios. Unsure how it's become invisible but unable to verify its 64mb.

[Aelinger]

[ref]MaLd0n[/ref], thx again for your help, it looks stable, i just have one last problem. One boot out of two the boot is done with "default macos graphics driver". I check "NVIDIA web driver" I reboot and it works. But when I reboot I have to do it again.

[laxattack]

Hey MaLd0n Just looking to make sure my DSDT is working efficiently for OpenCore trying to make sure I can boot windows properly, didn't know if this tool worked for OpenCore or not just figured I would try. Trying to make sure

Method (_STA, 0, NotSerialized) // _STA: Status

{

If (_OSI ("Darwin"))

{

Return (0x0F)

}

Else

{

Return (Zero)

}

}

is included

attached is my upload. http://s000.tinyupload.com/index.php?file_id=31925198717527217788

[MaLd0n]

[ref]mac944[/ref], yes, all work

check all configs, etc here

https://Olarila.com/forum/viewtopic.php?f=97&t=11237

Added in 33 seconds:

[ref]Aelinger[/ref], u select NvidiaWeb in ur config.plist?

Added in 20 minutes 40 seconds:

[ref]laxattack[/ref], for opencore need it in some patches if use dual boot, devs need fix it, is a very non-sense way

[laxattack]

[ref]mac944[/ref], yes, all work

check all configs, etc here

https://Olarila.com/forum/viewtopic.php?f=97&t=11237

Added in 33 seconds:

[ref]Aelinger[/ref], u select NvidiaWeb in ur config.plist?

Added in 20 minutes 40 seconds:

[ref]laxattack[/ref], for opencore need it in some patches if use dual boot, devs need fix it, is a very non-sense way

 

Based off of this post https://www.insanelymac.com/forum/topic/338516-opencore-discussion/?do=findComment&comment=2677577

these lines need to be added to the DSDT for OpenCore to dual boot

 

Method (_STA, 0, NotSerialized)  // _STA: Status
               {
                   If (_OSI ("Darwin"))
                   {
                       Return (Zero)
                   }
                   Else
                   {
                       Return (0x0F)
                   }
               }

 

and

 

Method (_STA, 0, NotSerialized)  // _STA: Status
               {
                   If (_OSI ("Darwin"))
                   {
                       Return (0x0F)
                   }
                   Else
                   {
                       Return (Zero)
                   }
               }

[sumsum]

I need help to patch dsdt for my High Sierra installation.

Here my runme.app output: https://drive.google.com/file/d/1fj_yI1bYVQQUveksQdYpJjQhgJY63qPy/view?usp=sharing

My Hardware is desktop with:

 

• Processor : Intel Corei3-4160

• Motherboard : ECS H81H3-M4

• RAM : 8GB DDR3 PC12800

 

Thank you