DSDT patch requests

[pcelkomp]

thanks!

Send me iMac-SSS.Dlink.zip

[ssprod]

Greetings, Maldon. Used your X99 EFI and have my system running, however any DSDT tweaks you can perform for this system would be most appreciated. Thank you, sir!

Gigabyte X99-SLI

i7 5820K

Sapphire RX590 Nitro+

Send me SSPROD's-Mac-Pro.zip

[DireRav3n]

Hi Maldo, my issue is with the usb 3 ports on the back that are not working correctly, if I connect a usb drive works fine but external hard drives are not mount it seems that doesn't provide enough power. Some help will be much appreciated with my DSDT.

macOS Mojave 10.14.6

Motherboard: Z97P-D3

CPU: i7 4790

GPU: Sapphire R9 290

RAM: 32GB

PCIE SSD 250GB

DSDT.aml.zip

[yamazaki45]

[ref]tcool89[/ref], check if all usb work with this dsdt, if yes, use it, iff no, use previous files, looks good

DSDT.aml.zip

Added in 2 minutes 9 seconds:

[ref]thelombies[/ref], o que não funcionou? aparentemente está tudo perfeito

Added in 50 seconds:

[ref]yamazaki45[/ref], salve a sua pasta efi, vc só precisa dela, não precisa instalar clover, etc, depois da install monta a partição efi e cola a pasta efi lá

 

Maldon, fiz o que pediu, reinstalei o clover a ultima versão, mesmo assim o mesmo problema. Salvei sua pasta EFI que estava utilizando com a CONFIG que me mandou, tentei com ela e nada, tentei só com a EFI que me mandou bem no começo é nada ainda, sempre para no -V, consegui resolver o probelma de ficar tela preta, utilizando do INTEL INJECT.

Mas concluindo, só inicia com o -V, mais alguma coisa que posso fazer ?

[rusovich]

[ref]MaLd0n[/ref], eres el amo del HACKINTOSH

[rusovich]

[ref]MaLd0n[/ref], no amigo cuando se va a reposo , al encenderla prende el led de power pero no la pantalla

Added in 9 minutes 23 seconds:

[ref]MaLd0n[/ref], sin el DSDT anda bien???

[Tryit]

MaLd0n:

Did fresh install, now booting with your EFI folder. Have slow restart also random restart.Can you do a nvram plist of paste output from nvramtest.command? will it work with open core? Bios Ver F 10

LocationServicesEnabled %01

SystemAudioVolume A

fmm-computer-name OLARLIA%e2%80%99s iMac

bluetoothInternalControllerInfo %8d%82%ac%05%000%b3%14%b8%09%8a%cb%81%1c

security-mode none

flagstate %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00

SystemAudioVolumeDB %f0

MyVar TestValue

efi-boot-device-data %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%00%17%03%12%0a%00%01%00%ff%ff%00%00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00`%f2%c8%1d%00%00%00%00,c%ca%c9%08%f41O%a4%a0!%bd%0f%fcc%ef%02%02%04%03$%00%f7%fct%be|%0b%f3I%91G%01%f4%04.hB%13%cbsA%a0%bd%a2B%87=%8a%b9%fc O%c6%7f%ff%04%00

EFILoginHiDPI %00%00%00%00

csr-active-config g%00%00%00

efi-boot-device IOMatchIOProviderClassIOMediaIOPropertyMatchUUIDC9CA632C-F408-4F31-A4A0-21BD0FFC63EF

bluetoothActiveControllerInfo %aa%0a%87%80%00%00%00%00%e0%14%00%00%00%00%00%00

specialbootdevice %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%00%17%03%12%0a%00%01%00%ff%ff%00%00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00`%f2%c8%1d%00%00%00%00,c%ca%c9%08%f41O%a4%a0!%bd%0f%fcc%ef%02%02%04%03$%00%f7%fct%be|%0b%f3I%91G%01%f4%04.hB%13%cbsA%a0%bd%a2B%87=%8a%b9%fc O%c6%7f%ff%04%00

MyVar TestValue is present?

[Process completed]

Thanks again

Send me OLARLIAs-iMac.hsd1.wa.comcast.net.zip

Edited August 7, 2019 by Guest

[uzmi]

Oi Maldon

Eu instalei o Mojave em uma placa-mãe AsRock B250M HDV com um G4560 e um disco Samsung 960 EVO NVme.

Eu tentei afinar meu DSDT, mas não posso.

Eu apreciaria se você me ajudasse a otimizá-lo.

Meus problemas visíveis:

1) A partição aparece como um disco externo (laranja)

Eu tentei com:

Name* Find*[HEX] Replace*[HEX] Comment

IOPCIFamily 4881FB00 000040 4881FB00 000080 X99 IOPCIFamily patch © Brumbaer

mas não funciona.

https://i.imgur.com/gA4SSZL.jpg' alt='IMGUR>'>

2) No Visão Geral do Hardware - PCI, a seção IMEI diz Driver instalado NO

https://i.imgur.com/zVFRW1v.jpg' alt='IMGUR>'>

3) Estou usando um SSDT-EC gerado com o Hackintool, mas gostaria de colocá-lo no DSDT e remover esse SSDT. Não sei como adicionarlo.

https://i.imgur.com/04KPItA.jpg' alt='IMGUR>'>

Nota:

Para o limite de porta, estou usando USBPorts.kext criado especificamente para minha placa-mãe.

Muito obrigado

Send me iMac-de-Guzman.zip

[MaLd0n]

[ref]chanchadaniel[/ref], Arquivo Comprimido.zip

 

Added in 51 seconds:

[ref]tcool89[/ref], work before my patches?

Added in 56 seconds:

[ref]thelombies[/ref], veja se tem CSM no bios/uefi setup

Added in 57 seconds:

[ref]pcelkomp[/ref], https://Olarila.com/forum/viewtopic.php?p=90495#p90495

[tcool89]

[ref]MaLd0n[/ref],

No, it did not work before either. Maybe this does not have to do with the DSDT then? Maybe I could add a custom SSDT?

[MaLd0n]

[ref]ssprod[/ref], DSDT.aml.zip

 

Added in 3 minutes 43 seconds:

[ref]DireRav3n[/ref], DSDT.aml.zip

use Olarila clover folder for ur chipset

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

Added in 42 seconds:

[ref]yamazaki45[/ref], não faço idéia

Added in 44 seconds:

[ref]rusovich[/ref], extract new send_me with my file

Added in 5 minutes 23 seconds:

[ref]Tryit[/ref], DSDT.aml.zip

 

Added in 8 minutes 35 seconds:

[ref]uzmi[/ref], use essa pasta efi, reinicie e extraia novo send_me

EFI.zip

 

Added in 1 minute 19 seconds:

[ref]tcool89[/ref], this option is enable in bios/uefi?

DSDT.aml.zip

DSDT.aml.zip

[tcool89]

[ref]MaLd0n[/ref],

Yes. WOL works if I put OSX into sleep mode, but if I turn the computer power off, it does not work. I have read that real/native Mac computers do not have this capability, but it is possible to do in Hackintosh. Thank you again for you help!

Would it help if paid you for your time to help me more with this? I am away from my computer often and use it remotely.

[MaLd0n]

[ref]tcool89[/ref], ye, need stay in sleep mode ever i think don't have other way

[tcool89]

[ref]tcool89[/ref], ye, need stay in sleep mode ever i think don't have other way

 

I understand. Thank you! One last question and I promise that is it! Since it seems NVRam does not fully support my MSI board, I am having issues using the "Select Startup Disk" option in the OSX preference pane. I want to be able to choose Windows remotely and reboot, but then change back to Mac after the next reboot similar to how Bootcamp works on Apple hardware. I tried EmuVariable and this worked, but then it permanently gets saved in the emulated NVRam and I cannot remotely switch back to OSX. Do you think native NVRam would fix this? Is there a workaround you suggest I could use?

Thank you as always for your time and help with the community. You make our lives much easier figuring these things out.

[uzmi]

Novo arquivo send-me solicitado

Send me iMac-de-Guzman.zip

[MaLd0n]

[ref]tcool89[/ref], i think no, we don't need change in clover boot screen, u can put a default boot volume in config.plist and boot ever for mac or last system

Added in 6 minutes 35 seconds:

[ref]uzmi[/ref], DSDT.aml.zip

[lon6919]

hi maldon can you check the send me please..did a new one with f4 already.thanks..i attach in last post

[cachiputi]

sorry, not yet.

Edited August 7, 2019 by Guest

[thelombies]

[ref]MaLd0n [/ref],No BIOS, eu tenho outro, mas eu tentei com csm nunca / csm sempre. e a saída DVI também não funciona.

Added in 4 minutes 57 seconds:

[ref]MaLd0n [/ref],

IMG_20190807_103145.jpg.zip

[uzmi]

Added in 6 minutes 35 seconds:

[ref]uzmi[/ref], DSDT.aml.zip

 

Você é um gênio ... como sempre.

Tudo perfeito por enquanto.

Eu continuarei testando.

O único detalhe é que ainda não carrega o driver para o IMEI.

Não sei se é importante ou não.

https://i.imgur.com/z1mHV52.jpg' alt='IMGUR>'>

Muito obrigado para sempre