DSDT patch requests

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

onemanosx · June 30, 2019

I am BEGGING anyone to please help. All asussmc patchs have been tried.

If you are not using AsusSMC on your hack, then you might want to use this

https://github.com/hieplpvip/AsusSMC

Need instruction on how to use the kext? Read here https://github.com/hieplpvip/AsusSMC/wiki/Installation-Instruction

Write to the dev for any issues encountered.

I have not used any Asus laptop so I cant be of much help here.

** A quick look at the patch repo and wiki instructions, they seem pretty straight forward. But, what do I know...

Edited June 30, 2019 by Guest

MaLd0n · June 30, 2019

[ref]Nomad89[/ref], DSDT.aml.zip

Added in 5 minutes 21 seconds:

[ref]luyatno92[/ref], DSDT.aml.zip

DSDT.aml.zip

yamvmax · June 30, 2019

If you are not using AsusSMC on your hack, then you might want to use this

https://github.com/hieplpvip/AsusSMC

Need instruction on how to use the kext? Read here https://github.com/hieplpvip/AsusSMC/wiki/Installation-Instruction

Write to the dev for any issues encountered.

I have not used any Asus laptop so I cant be of much help here.

** A quick look at the patch repo and wiki instructions, they seem pretty straight forward. But, what do I know...

As stated, I tried them. I am in contact with with him, maybe hopefully work it out. Just curious though why your 1st patch enabled the kb light, but it stuck on. Your second patch doesnt work at all.

onemanosx · June 30, 2019

[ref]yamvmax[/ref], Remember, some patches really require user to troubleshoot. Sometimes, its not a generic solution for all hacks.

I would read the wiki many times over and make sure I will not miss anything. Coming from a non programming background myself, I find some technical guides quite a mouthful to digest.

Importantly, only apply patches relevant to your system.

Good luck.

yamvmax · June 30, 2019

[ref]yamvmax[/ref], Remember, some patches really require user to troubleshoot. Sometimes, its not a generic solution for all hacks.

I would read the wiki many times over and make sure I will not miss anything. Coming from a non programming background myself, I find some technical guides quite a mouthful to digest.

Importantly, only apply patches relevant to your system.

Good luck.

Ok, Thanks so much. Curious as to what patch you applied to my 1st one? Will look into it. Thanks again

luyatno92 · June 30, 2019

[ref]Nomad89[/ref], DSDT.aml.zip

Added in 5 minutes 21 seconds:

[ref]luyatno92[/ref], DSDT.aml.zip

Thank you,

How to use this DSDT file on clover? Do I have to configure some stuff or just copy to ACPI/patched then reboot?

onemanosx · June 30, 2019

copy to ACPI/patched then reboot

correct

MaLd0n · June 30, 2019

[ref]luyatno92[/ref], clover/acpi/patches

check correct renames for ur chipset in Olarila Clover folder

luyatno92 · June 30, 2019

[ref]luyatno92[/ref], clover/acpi/patches

check correct renames for ur chipset in Olarila Clover folder

I've tried once with the sandy bridge laptop chipset. But it drives kernel panic.

enjoybrands · June 30, 2019

Sei que estou fazendo mais uma pergunta idiota, mas como eu executo essa solução?

No README fala que está depreciada...

''## NoVPAJpeg (Deprecated)

NoVPAJpeg.kext is deprecated.

In case its functionality is needed, use [WhateverGreen.kext](https://github.com/acidanthera/WhateverGreen) and add the following boot arguments:

```

shikigva=32 shiki-id=Mac-7BA5B2D9E42DDD94...''

[EDIT] Acredito que o arquivo seja esse: https://github.com/acidanthera/WhateverGreen/commit/e77943b04d4ae9c6da9c84d5cb7bb6491c06464e Mas não sei como fazer funcionar essa solução.

Pode me ajudar mais uma vez?

Desde já agradeço.

[ref]Anuloges[/ref], same files, same config

Added in 8 minutes 9 seconds:

[ref]dejson[/ref], DSDT.aml.zip

Added in 1 minute 10 seconds:

[ref]enjoybrands[/ref], https://github.com/vulgo/NoVPAJpeg

Added in 4 minutes 15 seconds:

[ref]furioso14[/ref], DSDT.aml.zip

u need test if work, idk

Edited June 30, 2019 by Guest

luyatno92 · June 30, 2019

[ref]luyatno92[/ref], clover/acpi/patches

check correct renames for ur chipset in Olarila Clover folder

I mean, I replace the EFI folder according to the my NB's Chipset before DSDT patching. And kernel panic was happened. And now I use EFI folder from the USB. Do I have to replace the EFI folder again and add the DSDT on it?

MaLd0n · June 30, 2019

[ref]enjoybrands[/ref], em bootargs

Added in 22 seconds:

[ref]luyatno92[/ref], if u have a worked EFI, just use renames in acpi tab

luyatno92 · June 30, 2019

[ref]enjoybrands[/ref], em bootargs

Added in 22 seconds:

[ref]luyatno92[/ref], if u have a worked EFI, just use renames in acpi tab

I don't get it. Could you explain to me how to do it?

MaLd0n · June 30, 2019

[ref]luyatno92[/ref], post one photo, kp screen

enjoybrands · June 30, 2019

Devo alterar o info.plist do whatevergreen? Me desculpe, mas, como já sabe, não estou familiarizado com o que devo fazer. Pode me ajudar?

[ref]enjoybrands[/ref], em bootargs

Added in 22 seconds:

[ref]luyatno92[/ref], if u have a worked EFI, just use renames in acpi tab

luyatno92 · June 30, 2019

[ref]luyatno92[/ref], post one photo, kp screen

I've tried to replace the efi folder with the Olarila folder. There's no KP again.

But, the shutdown seems not fixed yet. What I should do to fix the shutdown and sleep?

MaLd0n · June 30, 2019

[ref]enjoybrands[/ref], não, só adicionar em bootargs, msm local do -v etc

Added in 27 seconds:

[ref]luyatno92[/ref], extract new send_me, boot from hdd/ssd

cmatos57 · June 30, 2019

Viva.

Sou iniciante na área do hackintosh. Procedi à instalação conforme instruções, e os principais problemas que detecto são a placa gráfica não reconhecida, e o audio não funciona pelo hdmi (apenas pelos phones).

A minha configuração é:

MoBo MSI Z370 PC PRO

CPU Intel Core i7-8700

RAM G.Skill Trident Z RGB 16GB DDR4

Graph Asus ROG GeForce Strix GTX 1050 2GB OC

SSD Samsung 860 EVO sata M.2 500GB

Segue junto o ficheiro do "run me"

Send me Carloss-iMac.zip

Agradeço ajuda.

luyatno92 · June 30, 2019

[ref]enjoybrands[/ref], não, só adicionar em bootargs, msm local do -v etc

Added in 27 seconds:

[ref]luyatno92[/ref], extract new send_me, boot from hdd/ssd

Send you the new "Send Me"?

Here it is

https://drive.google.com/file/d/1Gs9_Ypb3-blh4T0aFkFdA_rqxWvfPs8J/view?usp=sharing

Nomad89 · June 30, 2019

Hello [ref]MaLd0n[/ref], with your DSDT I have problem boot normal but system is very laggy.

How to fix?

MaLd0n · June 30, 2019

[ref]cmatos57[/ref], vc tem de usar o high sierra, nvidia não rola mais no mojave ou catalina

EFI.zip

depois da instalação, monta a partição efi e mete essa pasta efi lá dentro, não precisa instalar clover, só instala o web driver com esse script

https://Olarila.com/files/Utils/nvidia-update.command.zip

Added in 49 seconds:

[ref]Nomad89[/ref], extract new send_me with my dsdt

Added in 1 minute 33 seconds:

[ref]luyatno92[/ref], u need solve ur power management, after it we check

dejson · June 30, 2019

[ref]Anuloges[/ref], same files, same config

Added in 8 minutes 9 seconds:

[ref]dejson[/ref], DSDT.aml.zip

Added in 1 minute 10 seconds:

[ref]enjoybrands[/ref], https://github.com/vulgo/NoVPAJpeg

Added in 4 minutes 15 seconds:

[ref]furioso14[/ref], DSDT.aml.zip

u need test if work, idk

Ok finally, sleep is working just fine, and all of my USB ports are working excellent, no problems at all. I still have a problem where I can't run Geekbench for example, but I guess that it has nothing to do with DSDT, right ???

I have GTX 260 NVIDIA card, and it is working by using el capitan nvda kext, I can play games, but for example, on windows SIMS 4 my daughter can play on ultra, and on hackintosh, only on medium ???

Sorry if thisw question is not DSDT related.

MaLd0n · June 30, 2019

[ref]dejson[/ref], extract new send_me, i need check

dejson · June 30, 2019

[ref]dejson[/ref], extract new send_me, i need check

Thank you, it is attached

Send me Dejans-iMac.zip

MaLd0n · June 30, 2019

[ref]dejson[/ref], generate one ssdt for power management

Sign In

DSDT patch requests

Recommended Posts

onemanosx

MaLd0n

yamvmax

onemanosx

yamvmax

luyatno92

onemanosx

MaLd0n

luyatno92

enjoybrands

luyatno92

MaLd0n

luyatno92

MaLd0n

enjoybrands

luyatno92

MaLd0n

cmatos57

luyatno92

Nomad89

MaLd0n

dejson

MaLd0n

dejson

MaLd0n

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity