jackfrost4u Posted June 16, 2019 Posted June 16, 2019 [ref]freethinker[/ref], DSDT.aml.zip change GFX0 to IGPU 47465830 49475055 ok. thanks for the help change HDAS to HDEF 48444153 48444546 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 change ECDV to EC 45434456 45435f5f Added in 7 minutes 44 seconds: [ref]rodrigo.bar1995[/ref], replace full efi, reboot, idk about ur gpu EFI.zip Added in 44 seconds: [ref]krisrob34[/ref], use Olarila clover folder for ur chipset and u can use any bios version Added in 5 minutes 7 seconds: [ref]sektor1952[/ref], DSDT.aml.zip audio https://Olarila.com/forum/viewtopic.php?f=28&t=9788 Added in 45 seconds: [ref]jackfrost4u[/ref], no, just same hardware with same bios version Added in 4 minutes 6 seconds: [ref]Snekitu[/ref], DSDT.aml.zip
thanhman18 Posted June 16, 2019 Posted June 16, 2019 (edited) hi Olarila forum please help me patch my hackintosh about this mac --->system report---->PCI pci didn't show anything my specs: intel i7 6700 ram ddr4 16gb mainboard gigabyte h170 gaming ddr4 vga rx580 4gb Send me Mans-iMac.zip Edited June 16, 2019 by Guest
Administrators MaLd0n Posted June 16, 2019 Administrators Posted June 16, 2019 [ref]jackfrost4u[/ref], use this option inn forum, Refer by username https://i.imgur.com/hawRqT1.png' alt='IMGUR>'> -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Snekitu Posted June 16, 2019 Posted June 16, 2019 Boas Mald0n. Continuou a dar o mesmo erro. Segue o novo RUN me ja com o dsdt patched Send me iMac.zip
lSawyer Posted June 16, 2019 Posted June 16, 2019 Olá MaLd0n Depois que apliquei a DSDT o teclado e o touchpad pararam de funcionar ?
jackfrost4u Posted June 16, 2019 Posted June 16, 2019 [ref]jackfrost4u[/ref], Added in 45 seconds: jackfrost4u, no, just same hardware with same bios version oh , then I need a new one then. this is another laptop all together and different specs from the one you did previous. 8th Gen Intel® Core i5-8265U: 1.6 up to 3.90 GHz - 6MB Cache Intel® UHD Graphics 620 32GB Dual Channel DDR4 @ 2400 MH Send me GALAGO.zip Send me GALAGO.zip
Administrators MaLd0n Posted June 16, 2019 Administrators Posted June 16, 2019 [ref]Snekitu[/ref], o dsdt não está sendo lido, pasta clover/acpi/patched Added in 27 seconds: [ref]lSawyer[/ref], extrai um novo send_me com o meu dsdt Added in 1 minute : [ref]jackfrost4u[/ref], dsdt stay load -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
sektor1952 Posted June 16, 2019 Posted June 16, 2019 Kernel panic when I try to reboot and not boot from the USB key. I also followed the steps for the audio. Any suggestions. [ref]freethinker[/ref], DSDT.aml.zip change GFX0 to IGPU 47465830 49475055 change HDAS to HDEF 48444153 48444546 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 change ECDV to EC 45434456 45435f5f Added in 7 minutes 44 seconds: [ref]rodrigo.bar1995[/ref], replace full efi, reboot, idk about ur gpu EFI.zip Added in 44 seconds: [ref]krisrob34[/ref], use Olarila clover folder for ur chipset and u can use any bios version Added in 5 minutes 7 seconds: [ref]sektor1952[/ref], DSDT.aml.zip audio https://Olarila.com/forum/viewtopic.php?f=28&t=9788 Added in 45 seconds: [ref]jackfrost4u[/ref], no, just same hardware with same bios version Added in 4 minutes 6 seconds: [ref]Snekitu[/ref], DSDT.aml.zip
Administrators MaLd0n Posted June 16, 2019 Administrators Posted June 16, 2019 [ref]sektor1952[/ref], u need a boot from hdd/ssd for start a fine tune -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
jackfrost4u Posted June 16, 2019 Posted June 16, 2019 Added in 1 minute : jackfrost4u, dsdt stay load what does stay load mean? sorry , just want to make sure.
Snekitu Posted June 16, 2019 Posted June 16, 2019 Obrigado Mald0n. Peço desculpa!!! Tinha metido ele no clover da pen por engano!!! Obrigado. Donation on the way!
sektor1952 Posted June 16, 2019 Posted June 16, 2019 Correction when I boot from the USB key I choose the HDD install, other than that if I remove the USB key and try to boot straight from the HDD is when I get the kernel panic and do not get a kernel panic. Should I reinstall from scratch? Basically I followed all the steps prior to 9, because I don't think I can boot prior to that without using the USB key, unless I missed something from the install document? Unless I clicked the wrong check boxes during the clover install, because I believe they are in Portuguese and I don't understand it to well and the screenshots do not match the latest version of clover that the document suggests to download. [ref]sektor1952[/ref], u need a boot from hdd/ssd for start a fine tune
krisrob34 Posted June 16, 2019 Posted June 16, 2019 (edited) I have no idea what's going on with this runme app. It just starts up and then loops over and over with this. Also, i replaced my efi folder with the one from Olarila and it won't boot thru the Olarila clover. I had to use my original clover on a thumb drive to boot into the drive. Nothing seems to work. Increased delay x2 for IOREG dump. This will take a while...(33 sec) IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) IOREG dump failed. Retrying Increased delay x2 for IOREG dump. This will take a while...(33 sec) Edited June 16, 2019 by Guest
krisrob34 Posted June 16, 2019 Posted June 16, 2019 mr.vx_k what exactly is this youre giving me? IT appears to be your Clover folder and custom DSDT. What all do i do with it?
lSawyer Posted June 16, 2019 Posted June 16, 2019 Olá Bom dia MaLd0n, segue em anexo " Send me" com a DSDT que tu me enviou. Send me MacBook-Pro-de-Wellington-C.zip
cazixpp Posted June 16, 2019 Posted June 16, 2019 sleep doesn't work. hardware decoding not working : videoproc not seeing my GPU SMBIOS : 14,2 GPU : GTX 1050 ti 4GB DDR5 RAM : 8GB CPU : xeon E5450 Motherboard: P5K SE System : High Sierra DSDT.zip
Rodrigo Silva Posted June 16, 2019 Posted June 16, 2019 [ref]MaLd0n[/ref], thanks. I will replace. CPU: Intel® Core i3-4150 CPU @ 3.50GHz Motherboard: GA-Q87M-D3PH GPU: PowerColor AMD Radeon RX 550 Storage: SSD KINGSTON SUV400S37240G
althon Posted June 16, 2019 Posted June 16, 2019 Hello [ref]MaLd0n[/ref], can you help me with my Acer Aspire V3-572 Intel® Core i7-4510U 8GB 1600mhz Thank you. Send me al-acers-MBP.zip
Rodrigo Silva Posted June 16, 2019 Posted June 16, 2019 [ref]MaLd0n[/ref], Just a question, I saw that you removed ATI Inject from the config, does my GPU work without having to apply Inject? CPU: Intel® Core i3-4150 CPU @ 3.50GHz Motherboard: GA-Q87M-D3PH GPU: PowerColor AMD Radeon RX 550 Storage: SSD KINGSTON SUV400S37240G
Rodrigo Silva Posted June 16, 2019 Posted June 16, 2019 [ref]MaLd0n[/ref], Thanks for the support. I'm trying to make a donation to PayPal, but I get the following message. The recipient is not of this currency. Choose another currency. CPU: Intel® Core i3-4150 CPU @ 3.50GHz Motherboard: GA-Q87M-D3PH GPU: PowerColor AMD Radeon RX 550 Storage: SSD KINGSTON SUV400S37240G
freethinker Posted June 16, 2019 Posted June 16, 2019 krisrob34 did you add permissions for the runme app under the Apple Menu ->System Preferences -> Security and Privacy -> Privacy Tab ? You need to add Accessibility as well as Full Access. then when you run the app it will ask you to confirm. the app will create the sendme file on your desktop.
Deadpool_reel Posted June 16, 2019 Posted June 16, 2019 I need help or someone who will part my DSDT, thank you in advanced I can only get the hack to boot a couple of times after fist install then it hangs on a black screen with a cursor sometimes, I was thinking it could be a graphics error since I'm rushing an RX 590 Send me Nixons-iMac.zip
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now