DSDT patch requests

[MaLd0n]

[ref]bulibasha[/ref], dsdt in clover/acpi/patched

audio inject in config.plist, devices tab

Added in 12 seconds:

[ref]mrintegra[/ref],

[alexisren]

Hello MaLd0n!

Thanks for your time.

With your DSDT works good (including speedstep), but shutdown and sleep do not work

[devmanus1]

Sir this is the new generated file. touch pad i2c is kext is added. I notice that if I boot using usb then touch pad work but not gesture and other just moving cursor

Send me Devendras-MBP.zip

[zemanely]

[ref]rogeriovasco[/ref], vc vai precisar criar o seu, só seguir o tutorial

Added in 40 seconds:

[ref]zemanely[/ref], try fake with uhd630 or skylake, etc

u need test

https://ibb.co/vBNw7bc Can’t select PlatformID. No id’s showing up

[Akshunhiro]

[ref]Akshunhiro[/ref], u try inject with hackintool?

Honestly, I don't know how. I have gone through all the options but the config it generates is still incomplete.

[bulibasha]

MaLd0n Thank you for your time. I put dsdt in clover/acpi/patched . Open coinfig.plist devices,unchecked boxes, like the one the picture you showed me saved reboot and still no audio devices.I attached the cloverCLOVER.zip folder. Thank you

[onemanosx]

[ref]bulibasha[/ref],

1. You need to know your audio codec. Use DPCI manager to find out or look through laptop manufacturer documentation

2. You'll need Lilu and AppleALC kexts

3. Find out the possible audio layout id for your codec. https://github.com/acidanthera/AppleALC/wiki/Supported-codecs

4. Inject each id one by one, rebooting each time and observe your audio quality.

[bzasy]

Hello all!

Have macOS Sierra 10.13.6

My specs:

- MSI Z370 Krait Gaming

- I7 8700K

- NVIDIA MSI GeForse GTX 1060 6GB

- 8GB DDR4 3000mhz

I generated the Send Me file:

https://drive.google.com/open?id=1j-UIueB2MzEFkMhr_-otOQIFiTlGwRXy

[bulibasha]

onemanosx I checked kext/ other I have Lilu and AppleALC kext inside the folder

I opened dpci manager

codec name IDT IDT92HD87B2/4 layout 12

codec name intel HD 4000 ivy bridge HDMI

Open EFI/ clover /config.plist Devices . I have audio Inject 3 Change it to 12 ? reboot ?

Edited April 15, 2019 by Guest

[onemanosx]

I have audio Inject 3 Change it to 12 ? reboot ?

yes.

[bulibasha]

onemanosx . reboot still audio is grayed out. Do I need to check any boxes ? resetHDA ?

[onemanosx]

[ref]bulibasha[/ref], check ioreg in HDEF device if layout ID 12 is successfully injected. You can rebuild cache & permissions and reboot again. Tick ResetHDA is an option, too!

[bulibasha]

onemanosxI open ioreg / find HDEF@1B I am not sure what I am looking for . I can't attach a picture to show you the screenshot.

What is the command in terminal to rebuild cache and permissions ?

[onemanosx]

[ref]bulibasha[/ref],

look for alc-layout-id. Here my layout id of 27 (convert to hex is 1B) is injected

https://imgur.com/bKoa1w5

to rebuild kextcache and permissions

 

sudo touch /System/Library/Extensions && sudo kextcache -u /

[bulibasha]

ok . I I have alc layout id 0c 00 00 00

So I look up decimal to hex converter 12 in hex is C

I will run the command that you told me. Thank you again for your time and patience with me.

Added in 7 minutes 51 seconds:

onemanosx I paste the line in terminal and I get warning / apple internal / library / extensions no such file or directory

[onemanosx]

[ref]bulibasha[/ref], upload your RunMe files here

[bulibasha]

here it is . I notice when i reboot the volume icon comes on for 1 sec and then it goes grey.

Send me tibs-MacBook-Air.zip

[onemanosx]

[ref]bulibasha[/ref], appleALC will only work with native appleHDA. If you have had your appleHDA patched, revert back to vanilla.

Another way to rebuild cache and permissions is to use kext utility app.

[bulibasha]

onemanosx I do not have appleHDA kext in other . Should I have it installed ?

[onemanosx]

onemanosx I do not have appleHDA kext in other . Should I have it installed ?

AppleHDA is native kext. Try rebuilding permissions using kext utility or similar and reboot. see if it works. Else go here and seek Mirone's help http://Olarila.com/forum/viewtopic.php?f=45&t=6854

[bulibasha]

I used kext utility and rebuild / reboot same grey icon audio.

[MaLd0n]

[ref]alexisren[/ref], extract new send_me

Added in 2 minutes 37 seconds:

[ref]devmanus1[/ref], delete old send_me files in ur desktop, reboot and extract again

Added in 1 minute 14 seconds:

[ref]zemanely[/ref], u need check a tutorial here

https://Olarila.com/forum/viewtopic.php?f=62&t=9275

Added in 4 minutes 16 seconds:

[ref]bzasy[/ref], DSDT.aml.zip

Use Olarila clover folder for ur chipset

[moemengaber]

Hello, Thanks for your efforts, i installed your Mojave image on HP 800 G1, i managed my GT 730 DDR5 to work with OSX web driver and it's OK now.

- My hackintosh is fine, stable ( 2 days till now with Xcode work ) and speed, but i don't know if should i use a DSDT to gain more stability and speed.

- Also my ALC211 audio working nice with AppleALC ( with layout 11 ) but mic doesn't work and i need it unfortunatly.

I tried voodooHDA.kext but sound in headphone isn't as clear as AppleALC.

- finally, is my config.plist or my clover have something i don't need ?

Thanks a lot <3

 

Send me Moemens-iMac.zip

[MaLd0n]

[ref]moemengaber[/ref], -REPLACE FULL CLOVER FOLDER

CLOVER.zip

-INSTALL CLOVER AGAIN

LAST Clover Version

-REBOOT

extract new send_me after reboot

[moemengaber]

[ref]moemengaber[/ref], -REPLACE FULL CLOVER FOLDER

CLOVER.zip

-INSTALL CLOVER AGAIN

LAST Clover Version

-REBOOT

extract new send_me after reboot

 

Thanks for your reply, i did that but that broke my NVIDIA card performance( it now blinking many times with black screen while i'm working).

Thanks again, and waiting for your reply

Send me Moemens-iMac.zip