DSDT patch requests

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

Subsystems · March 30, 2019

Hey there Mald0n! I see you have a lot of work helping all these people...

I'm sorry but, can you please help me with a patch?!

Files you request on attachments. Thanks in advance!

send_me.zip

MaLd0n · March 30, 2019

[ref]draysondesign[/ref], DSDT.aml.zip

Added in 3 minutes 23 seconds:

[ref]sendom[/ref], DSDT.aml.zip

Added in 8 minutes 21 seconds:

[ref]Hootpy[/ref], DSDT.aml.zip

Added in 1 minute 5 seconds:

[ref]my007[/ref], U have a full DSDT patched

Added in 3 minutes 32 seconds:

[ref]bonejoev[/ref], here, into device HDEF

about wifi card, need check, try with FakePCIID_Broadcom_WiFi.kext and FakePCIID.kext

https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads/

Added in 8 minutes 41 seconds:

[ref]mr.vs_k[/ref], disable change _DSM to XDSM

Added in 3 minutes 59 seconds:

[ref]RoyalFluzh[/ref], DSDT.aml.zip

remove FakePCIID_XHCIMux.kext

and use it too

change ECDV to EC
45434456 
45435f5f

Added in 8 minutes 11 seconds:

[ref]makmp[/ref], DSDT.aml.zip

Added in 2 minutes 37 seconds:

[ref]williaje12[/ref], DSDT.aml.zip

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

Added in 1 minute 11 seconds:

[ref]gilgamet[/ref], hdmi u need check a hackintool

idk about ur wifi card, need check

Added in 10 minutes 43 seconds:

[ref]bvtest[/ref], use it, reboot and extract new SEND_ME

CLOVER.zip

Added in 5 minutes 54 seconds:

[ref]flac908[/ref], DSDT.aml.zip

Added in 3 minutes 20 seconds:

[ref]ludwig999[/ref], DSDT.aml.zip

use a update clover folder

DSDT.aml.zip

bvtest · March 30, 2019

Hi MaLd0n,

Thank you.

I have replaced the clover directory with the content of your Clover.zip

Rebooted system, and did RunApp and created new Send Me

New Send Me file is attached.

Thanks

BV

Send me BVMacPro1.zip

skumar9296 · March 30, 2019

Here is my DSDT patch request.

My usb wifi adapter is not working.

AND THANKS FOR YOUR HARDWORK.

Send me Supratims-iMac.zip

Edited March 30, 2019 by Guest

MaLd0n · March 30, 2019

[ref]telepati[/ref], CLOVER.zip

use only it with last clover version

dont need exclude nothing

Added in 9 minutes 30 seconds:

[ref]mskyway[/ref], use it, reboot and extract new send_me

DSDT.aml.zip

here

https://Olarila.com/forum/viewtopic.php?f=76&t=6629

put one 8700

samykoka · March 30, 2019

Hi MaLd0n,

Great job you are doing here mate , Thanks ..

here is my sendme files , please patch .

asus x99-a i7-5820k rx580

Send me samys-iMac-Pro.zip

MaLd0n · March 30, 2019

[ref]Subsystems[/ref], use only it with last clover version

CLOVER.zip

after reboot extract new SEND_ME

Added in 5 minutes :

[ref]bvtest[/ref], DSDT.aml.zip

for brightness key u need use a debug kext and check what patch u need

battery work?

Added in 5 minutes 4 seconds:

[ref]skumar9296[/ref], DSDT.aml.zip

USB adapter is just a kext

Added in 8 minutes 55 seconds:

[ref]samykoka[/ref], DSDT.aml.zip

USE IT TOO

AMDRadeonPro.kext.zip

DSDT.aml.zip

bvtest · March 30, 2019

Hi MaLd0n

Thank you.

I updated folder with patched DSDT.

The Synaptics Touchpad is still not working.

I will do some check and find out more on the brightness key.

Battery is working fine.

Regards

BV

MaLd0n · March 30, 2019

[ref]bvtest[/ref], extract new send_me

samykoka · March 30, 2019

Thanks MaLd0n ,

but i get black screen after waking up from sleep .

anything i can do ?

Regards

MaLd0n · March 30, 2019

[ref]samykoka[/ref], extract new send me

samykoka · March 30, 2019

[ref]samykoka[/ref], extract new send me

thanks mate

here is the new one .

Regards

Send me samys-iMac-Pro.zip

MaLd0n · March 30, 2019

[ref]samykoka[/ref], use it and extract new send_me after reboot, ur config is very strange

CLOVER.zip

samykoka · March 30, 2019

[ref]samykoka[/ref], use it and extract new send_me after reboot, ur config is very strange

CLOVER.zip

used it , gives me panics ... restored my old clover

MaLd0n · March 30, 2019

[ref]samykoka[/ref], what panic? post one photo

mashuk12 · March 30, 2019

Hi MaLd0n

I updated clover bootloader 4910 and updated macos mojave 10.14.4

need dst for intel 510 work and all work fine like real mac

motherboard: gigabyte h110 s2pv

Gpu: intel HD 510 and nvidia gt710

processor : pentium g4400 6th gen

Send me MAshs-iMac.zip

Nypa · March 30, 2019

Hi! Thank you for support! Everything works fine with Mojave 10.14.4 but the following:

- No fans detected which means that the case fans runs on 100 % all the time.

- The system freezes approx 30 sec after boot 3 out of 4 times. When I hard restart the log says "Automatically reboot after panic".

I've added all the different FakeSMC kexts to your Clover folder, which added CPU temperature, but not the fan control. Some help would be gratefully appreciated. Please find RunMe file attached on Google Drive (Too large to upload)

https://drive.google.com/file/d/10j4hoMd6Cq2XjxDzbb-1UgGoSHhsDfUU/view?usp=sharing

gilgamet · March 30, 2019

Hello

idk ? maybe it's bcm94350zae? it's that ? or m2 ngff?

sorry i'm not a pro !

bonejoev · March 30, 2019

thank you Mald0n, wifi has been resolved with the FAKEPCIID_BROADCOM...KEXT

when I check my DSDT I don't see those values that you highlighted, and by changing alc-layout-id you mean the first value 0x01?? or the whole thing 0x01, 0x00 0x00 0x00 ? I don't know how to do these things. this sound thing is becoming a pain.

another thing, when I edit my DSDT with maciasl and I save it. when I open again the changes that I did does not appear. what's up with that, am I doing something wrong.

also sleep is still not resolved, goes to sleep with wakes up with black screen.

Edited March 30, 2019 by Guest

bradipo666 · March 30, 2019

thanks

Send me iMac-di-Mac.zip

onemanosx · March 30, 2019

by changing alc-layout-id you mean the first value 0x01?

Yes. 0x01 is Hex for Decimal value of 1 (meaning: it is set for layout id 1). You should try for all layout id available fro your specific codec.

onemanosx · March 30, 2019

idk ? maybe it's bcm94350zae? it's that ? or m2 ngff?

sorry i'm not a pro !

If you dont know, neither do we LOL! You're the one having the device not us!

Macosus · March 30, 2019

Send me Sciences-MacBook-Pro.zipAttached is my send_me.zip from my laptop...

Appreciate any help to patch my DSDT:

My battery doesn't display properly (doesn't display the right percentage (display only 0%)…).

My touchpad (I2c), the backlit keyboard and Fn keys don’t work.

FaceTime, iMessage and Appstore don't work

Sometimes my mouse doesn't work

I can't adjust screen brightness.

Thanx in advance...https://Olarila.com/forum/download/file.php?mode=view&id=19706

bonejoev · March 30, 2019

thank you onemanosx, I appreciate your input. and I'm just reporting back to say that I was able to get sound & mic to work, by going into config file and in devices > properties specifying the layout-id 12 restarted the laptop and boom!! it was working. the only thing that I can see that is left to be fixed is sleep. it goes to sleep and when I wake it up the screen remains dark, but I don't think the laptop is functional at that point.

daovanhoi · March 30, 2019

I have successfully installed mac on the PC with the following configuration

Giga z390 Master

i9 9900k

rx580

However, USB 3.0 and 3.1 ports are not working, can you fix it with dsdt file? Thank you.

Send me Macs-iMac-i9 9900k+giga z390 master.zip

Sign In

DSDT patch requests

Recommended Posts

Subsystems

MaLd0n

bvtest

skumar9296

MaLd0n

samykoka

MaLd0n

bvtest

MaLd0n

samykoka

MaLd0n

samykoka

MaLd0n

samykoka

MaLd0n

mashuk12

Nypa

gilgamet

bonejoev

bradipo666

onemanosx

onemanosx

Macosus

bonejoev

daovanhoi

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity