DSDT patch requests

Q: What is a Hackintosh?

A non-Apple computer configured to run macOS using compatible PC hardware combined with a custom bootloader and configuration files to emulate a real Mac environment.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA). It is generally not illegal for personal experimentation but not permitted for commercial use.

Q: What hardware is best for a Hackintosh?

The best hardware closely matches real Apple systems, with Intel CPUs (6th Gen to Core Ultra), AMD Radeon GPUs, compatible chipsets, and Intel-based Wi-Fi cards offering higher success rates.

Q: Can I build a Hackintosh with an AMD CPU?

Yes, macOS can run on AMD Ryzen CPUs using kernel patches, but Intel CPUs provide better native compatibility.

Q: What is OpenCore?

OpenCore is a modern Hackintosh bootloader that provides near-native macOS behavior and is the recommended bootloader for new installations.

Q: Is Clover still supported?

Yes, Clover is still supported but less recommended compared to OpenCore for modern systems.

Q: Which macOS versions support Hackintosh?

Hackintosh systems support macOS versions from Leopard up to recent releases, depending on hardware compatibility.

Q: Do NVIDIA graphics cards work on Hackintosh?

Only older NVIDIA GPUs work on older macOS versions; modern NVIDIA GPUs are incompatible with current macOS releases due to lack of driver support.

Q: What is an EFI folder?

The EFI folder contains the bootloader, drivers, kexts, and configuration files required to boot macOS on a Hackintosh.

Q: What are kexts?

Kexts (kernel extensions) are drivers that enable hardware functionality such as audio, Ethernet, USB, and graphics.

tiopower · March 19, 2019

[ref]tiopower[/ref], remove or block VoodooTSCSync.kext

https://Olarila.com/forum/viewtopic.php?f=28&t=9317

this is what I get, another KP ....

Should I give up?

Archivo comprimido.zip

ifpanos · March 19, 2019

sending a second "send me" file

this one is with marantz and video projector on. don't know if matters

Send me 192.168.0.120.zip

MaLd0n · March 19, 2019

[ref]nawlinsborn73[/ref], u need install clover after replace folder

Added in 1 minute 33 seconds:

[ref]williaje12[/ref], use my clover folder above with intelhd enable, both gpus work together to avoid problems like freezes

Added in 5 minutes 15 seconds:

[ref]patyabr[/ref], DSDT.aml.zip

Added in 5 minutes 59 seconds:

[ref]oshahin89[/ref], DSDT.aml.zip

extract new send_me after reboot

Added in 1 minute 7 seconds:

[ref]Kylergib[/ref], post a full dump with I2C kexts loaded

Added in 5 minutes :

[ref]Speaker007[/ref], DSDT.aml.zip

create a full video patch

https://Olarila.com/forum/viewtopic.php?f=62&t=9275

Added in 5 minutes 12 seconds:

[ref]nawlinsborn73[/ref], DSDT.aml.zip

use our clover folder for ur chipset

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

DSDT.aml.zip

system32 · March 19, 2019

[ref]sachesi[/ref], CLOVER.zip

Added in 24 seconds:

[ref]system32[/ref], is a usb 3 pci card?

Added in 1 minute 26 seconds:

[ref]bonejoev[/ref], try this
com.apple.driver.AppleAHCIPort
40600200
00000000
ALPM IO Error AppleAHCIPort

Yes usb 3 pci card

MaLd0n · March 19, 2019

[ref]ifpanos[/ref], DSDT.aml.zip

i don't have idea about ur audio problem, use this dsdt, ur config need a fine tune

Added in 1 minute 26 seconds:

[ref]tiopower[/ref], i don't see nothing in screen about error

Added in 29 seconds:

[ref]system32[/ref], native support use fresco logic fl1100 chipset

system32 · March 19, 2019

[ref]ifpanos[/ref], DSDT.aml.zip

i don't have idea about ur audio problem, use this dsdt, ur config need a fine tune

Added in 1 minute 26 seconds:

[ref]tiopower[/ref], i don't see nothing in screen about error

Added in 29 seconds:

[ref]system32[/ref], native support use fresco logic fl1100 chipset

I use this model

bonejoev · March 19, 2019

I did try it, but nothing happened

MaLd0n · March 19, 2019

[ref]bonejoev[/ref], u see a diskio error in boot? ahci is enable?

<dict>
			<key>Comment</key>
			<string>fix IO error for 10.13, credit SunKi</string>
			<key>MatchOS</key>
			<string>10.13.x</string>
			<key>Disabled</key>
			<false/>
			<key>Name</key>
			<string>AppleAHCIPort</string>
			<key>Find</key>
			<data>RYX2D5XCiciD4P5mhcl4D4TSdQs=</data>
			<key>Replace</key>
			<data>iciD4P5mhckPmMFBCMyQkJCQdQs=</data>
		</dict>
		<dict>
			<key>Comment</key>
			<string>fix hotplug for 10.13, credit SunKi</string>
			<key>MatchOS</key>
			<string>10.13.x</string>
			<key>Disabled</key>
			<false/>
			<key>Name</key>
			<string>AppleAHCIPort</string>
			<key>Find</key>
			<data>icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=</data>
			<key>Replace</key>
			<data>kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=</data>
		</dict>

bonejoev · March 19, 2019

I don't see it, maybe because I wasn't looking for it, but now I'm going to analyze the boot, another thing Is that when I go to the bios, it really doesn't give the option to change the disk mode, I don't see the option for AHCI and I've looked extensively,

Added in 41 minutes 32 seconds:

thank you for your time Mald0n, I just found this out on my laptop

https://h30434.www3.hp.com/t5/Notebooks-Archive-Read-Only/How-to-enable-AHCI-for-HP-ENVY-TouchSmart-m6-k015dx/m-p/3310507#M115130

it turns out that my laptop doesn't support AHCI due to a technical reason that HP decided to exclude and replace by RAID

my question to you, is there a workaround to install osx in a situation like this?

Speaker007 · March 19, 2019

[ref]Speaker007[/ref], DSDT.aml.zip

create a full video patch

https://Olarila.com/forum/viewtopic.php?f=62&t=9275

* I made video patch, but screen backlight is the same, I don't know why, but in standard DSDT with AddPLNF Fix screen backlight is better

* USB3 still slow and sleep/wake don't work. Did you change something ?

* With your first DSDT CPU Frequency is better (From 1.3Ghz to 2.5GHz CPU, and GPU 350MHz to 850MHz). In second DSDT CPU's minimum frequency is 2.2GHz to 2.5GHz and GPU 850. I think it's bad for battery and temperature. Geekbench also show worst results with second DSDT variant. Can you make fix for CPU as in the first variant ? I show in specification, that for GPU rang must be from 300 to 900, can you also fix it ?

P.s.

- TurboBoost max value 2.5Ghz, but processor can 2.7Ghz

Can't, because 2.5 I'ts for 2 CPU cores and 2.7 for 1. It's my mistake, sorry.

Send me iMac-Robert.zip

March 19, 2019

send me DSDT.aml

Send me Mac-Pro-andrey.zip

nawlinsborn73 · March 19, 2019

OK let's try this again. I replaced the DSDT, replaced with Olarila Clover folder, installed clover. Here are the new set of files. Hopefully I did it correct this time

Send me Scotts-iMac.zip

MaLd0n · March 19, 2019

[ref]bonejoev[/ref], extract original DSDT

Added in 2 minutes 35 seconds:

[ref]Speaker007[/ref], DSDT.aml.zip

-USB, just a patch or exclude flag

-Frequency, is just a plugin type, the problem is not dsdt

Added in 6 minutes 25 seconds:

[ref]929151[/ref], DSDT.aml.zip

Added in 3 minutes 14 seconds:

[ref]nawlinsborn73[/ref], DSDT.aml.zip

DSDT.aml.zip

nawlinsborn73 · March 19, 2019

After installing edited DSDT

The list of things that are still not working at the moment:

1. Audio ***FIXED***

2. Bluetooth ***FIXED***

3. Wifi ***FIXED***

4. Ethernet ***FIXED***

5. Backlighting

Edited March 20, 2019 by Guest

binhnv · March 19, 2019

Hi [ref]MaLd0n[/ref], my benmark of cpu and gnu of my machine is work normally, but when I speed test my SSD Kingston 120gb by Blackmagic Disk Speed Test software, read speed is normal but write speed is so low(70mb/s) as spec of SDD(when I test in windows is 400mb/s), are you have any ideal for this problem? please help me.

bonejoev · March 19, 2019

this is the original DSDTs from Clover boot

https://mega.nz/#!Epk20QaK!_3CBQjTlJmPJY0Mn1_drce4j6IV9_S1I03zEZJIRQFw

MaLd0n · March 19, 2019

[ref]nawlinsborn73[/ref],

-audio, inject via clover

-BT/WIFI, check what card u have

-ethernet, what card?

-backlight https://github.com/acidanthera/WhateverGreen/commit/8a8362078da90d4ec70aacd70adf1a853ac1d870

Added in 20 seconds:

[ref]binhnv[/ref], no idea, u use it in sata 3 port?

Added in 5 minutes 50 seconds:

[ref]bonejoev[/ref], try

DSDT.aml.zip

xaving_93 · March 19, 2019

Hello, My name is Xavi, I try to install Mojave but I need the dsdt for my B360M Bazooka MSI motherboard, please help me check this attachment file

Thank you very much.

Send me Xavis-iMac.zip

MaLd0n · March 19, 2019

[ref]xaving_93[/ref], Use our clover folder for chipset series 300, reboot and extract new send_me

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

yumo · March 19, 2019

Hi, MaLdOn

Please help me because I changed the BIOS.

Thank you.

Send me iMac.zip

Lobo602 · March 19, 2019

Hello

First Hack build

Asrock deskmini 110

STX110 Mobo

I5 7600

Everything seems to work but have horrible video ghosting, artifacts and such. Tried numerous fixes.

Great otherwise.

Any help appreciated.

dskmini110.zip

Speaker007 · March 19, 2019

Speaker007,

DSDT.aml.zip

(24.47 KiB) Downloaded 3 times

-USB, just a patch or exclude flag

-Frequency, is just a plugin type, the problem is not dsdt

* 3.5 mm audio output doesn't work. When I plug-in my headphones there is a squeaking sound

Send me iMac-Robert.zip

EDV11 · March 19, 2019

Hello,

I have a problem with this install

Gigabyte Z370N WiFi

i5 8400

Everything works fine, but I have an issue when I plug two monitors. If I turn it on with one monitor it works fine. If I plug the second monitor it also works fine and can do all the setups. But if I power on the computer with both monitors connected, it doesn't boot up.

And I'll like to add that, after turning screen off the screen won't turn on showing image, only black. I'm using an AOC monitor with 1440p. I had it hooked to a 1080p monitor and it worked fine.

Third update - If I connect the monitor to the HDMI output and not the HDMI2.0, it works fine

Send me iMac-de-Eduardo-2.zip

Edited March 19, 2019 by Guest

oshahin89 · March 19, 2019

[

Added in 5 minutes 59 seconds:

[ref]oshahin89[/ref], DSDT.aml.zip

extract new send_me after reboot

after using the dsdt u sent the system didnt boat ,here is my new files

Send me MacBook-Pro.zip

nawlinsborn73 · March 19, 2019

[ref]nawlinsborn73[/ref],

-audio, inject via clover

-BT/WIFI, check what card u have

-ethernet, what card?

-backlight https://github.com/acidanthera/WhateverGreen/commit/8a8362078da90d4ec70aacd70adf1a853ac1d870

Should audio be injected through Clover Configurator or the clover boot up?

Wifi and BT Atheros AR5BHB92***FIXED***

Ethernet Killer™ E2200 LAN ***FIXED***

Edited March 20, 2019 by Guest

Sign In

DSDT patch requests

Recommended Posts

tiopower

ifpanos

MaLd0n

system32

MaLd0n

system32

bonejoev

MaLd0n

bonejoev

Speaker007

929151

nawlinsborn73

MaLd0n

nawlinsborn73

binhnv

bonejoev

MaLd0n

xaving_93

MaLd0n

yumo

Lobo602

Speaker007

EDV11

oshahin89

nawlinsborn73

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity