DSDT patch requests

[bluehelium]

Hi - I need a brightness modifier patch, a backlight patch, touchpad gestures, and battery management (I don't have a battery icon or anything that shows battery life). I have an ASUS Pro B944UA.

There is also a minor issue where the HDMI has to be plugged only after booting is done and not before I boot into Mojave.

This is unrelated but I also get the following error when I try downloading something from the AppStore: "An error occurred during purchase. An unknown error has occurred"

Thanks for the help!

Will donate!

Send me Is-MacBook-Pro.fios-router.home.zip

[Mister3000]

[ref]hulliver[/ref], CLOVER.zip

Added in 6 minutes 23 seconds:

[ref]Mister3000[/ref], first disable "change _DSM to ZDSM" and reboot

Captura de Tela 2019-01-25 às 22.54.13.png

 

Thanks for your reply.

Ok, disabled that patch, but now computer will not boot. Even tried removing the nvdia=1 boot flag.

Computer freezes in this screen:

[MaLd0n]

[ref]Mister3000[/ref], u have some hackintosh kexts in system folder too? like l/e or s/l/e

u can use a original dsdt, press O key in clover boot screen, go to acpi patching, dsdt name and use bios.aml

[Mister3000]

[ref]Mister3000[/ref], u have some hackintosh kexts in system folder too? like l/e or s/l/e

u can use a original dsdt, press O key in clover boot screen, go to acpi patching, dsdt name and use bios.aml

 

I don’t think I installed any kexts in the system folders.

Should I check for anything in particular ?

All my kexts are in clover/other

Do you want me to boot using usb installer and just to check s/l/e for a kext that shouldn’t be there ?

——- Edit

Well the only kext that could be there is voodoohda for my audio. Other than that all my kext on clover folder

[onemanosx]

[ref]Mister3000[/ref], you are unable to boot possibly due to the battery status patch you did. You can try to boot up as Mald0n suggested below.

Maldon

u can use a original dsdt, press O key in clover boot screen, go to acpi patching, dsdt name and use bios.aml

 

Once booted, you can replace the DSDT with Maldon's.

[ireyagun]

[ref]ireyagun[/ref], DSDT.aml.zip

Generate one SSDT for PM with Piker script

Added in 8 minutes 35 seconds:

[ref]daovanhoi[/ref], DSDT.aml.zip

Added in 3 minutes :

[ref]adymb128[/ref], DSDT.aml.zip

 

Hi MaLd0n, thank you very much

I have tried this DSDT.aml in High Sierra and Mojave

I have generate SSDT with Piker Script

High Sierra, going to sleep but screen not wakes up and it must be button reset. SpeedStep works whit that SSDT, but Wake on Lan won't works and power saver has missed the checkbox wake for network access

In Mojave, it goes to sleep, takes long time to sleep (2,3 min) and when it wakes up one SATA internal disk is ejected and I get multicolor umbrella (Spinning pinwheel) the system is hang. SpeedStep won't works (Processor frequency is at the top) and Wake On Lan won't works, Power Saver also have missed take for network access checkbox

Regards

[serge]

Good Morning could you patch my DSDT.Thank you .

Send me Serges-iMac.zip

[hulliver]

Post by MaLd0n » 26 Jan 2019, 01:48

hulliver,

CLOVER.zip

(2.1 MiB) Downloaded 3 times

 

Good morning, this variation did not boot up. i went over your usb drive and did another sendme. Screenshot attached.

Sendme7.zip

[MaLd0n]

[ref]bluehelium[/ref], use it, reboot and extract new send_me

DSDT.aml.zip

 

Added in 1 minute 27 seconds:

[ref]ireyagun[/ref], u need check a solution for it, i don't have idea

Added in 2 minutes 45 seconds:

[ref]serge[/ref], DSDT.aml.zip

 

Added in 59 seconds:

[ref]hulliver[/ref], ye man, the problem is uefi driver, need wait a solution from devs, some z390 have it, bad

DSDT.aml.zip

[Mister3000]

[ref]Mister3000[/ref], you are unable to boot possibly due to the battery status patch you did. You can try to boot up as Mald0n suggested below.

Maldon

Once booted, you can replace the DSDT with Maldon's.

 

Hello everyone...

The dsdt Im using is the one from mald0n.

After his battery patch I could still boot.

The problem is he asked me to disable the _DSM to ZDSM patch and then I wasn’t able to boot, after I resubmitted my send me file.

What should I do next ?

Is there a Kext creating a conflict ?

After I can get the shutdown fixed and the sleep I’ll be all good.

Thanks Guys for your time

[serge]

Thank you very much MaLd0n you are diamond

[bskim]

[ref]bskim[/ref], use a clover patches for ur chipset ich8, ich8 have a native things

the problem is ur dsdt, have a usb patches etc, dont need

 

Now USB ports are working, but I need the DSDT because the BIOS somehow resets itself every time I restart my device without it. At the same time, audio did work without the DSDT, but does not work with the DSDT. Can you fix my audio?

Another thing, when I sleep my device, it just wakes up like two or three seconds after the device starts sleeping, as in the hard drive spins again though there’s nothing on the screen. Is this about the DSDT?

Thank you very much for your hard work!

Send me MacBook.zip

[smuhack]

Patch me up plz??

and if anyone can somehow enable my onboard wireless card as well? Thank you

Specs:

MB: h97m-itx/ac LGA 1150 Haswell

RAM: 8GB DDR3

CPU: i5-4950s

GPU: HD4600 / GTX 650ti Boost

WLAN : ASRock 802.11ac WiFi + BT v4.0 module, 2 ASRock WiFi 2.4/5 GHz Antennas

Send me HackMinis-iMac.zip

[Adii]

hey

plz patch my DSDT.I am using Dell inspiron 15 3521 Intel Pentium- 2127U laptop with intel hd graphics 4000.

follwing patch are required

HD4000 Low res. (GraphicsEnabler=No)

- IRQ Fix

- HPET Fix

- 7-series USB

- 7 series USB3 Multiplex

- 6 series USB

- SMBUS Fix

- RTC Fix

- AC Adapter Fix (with/without)

- OS Check Fix

- Brightness Fix HD4000

- Audio Layout ID 12 ( changed the 12 to 69)

- Fix _Wak arg0v2

my runme fileSend me adiis-Air.zip

clover CLOVER.zip

DSDT file DSDT.aml.zip

 

once agains thanx.

my system show Intel HD Graphics 2500 1536 MB but i have intel hd graphics 4000,Dock is also not transpartent.

 

how to fix it.

[MaLd0n]

[ref]bskim[/ref], DSDT.aml.zip

 

Added in 5 minutes 35 seconds:

[ref]smuhack[/ref], DSDT.aml.zip

forget onboard wireless

Added in 6 minutes 48 seconds:

[ref]Adii[/ref], DSDT.aml.zip

DSDT.aml.zip

DSDT.aml.zip

[bskim]

[ref]bskim[/ref], DSDT.aml.zip

 

I am afraid audio still isn't working. And sleep does work now, but only once. When I sleep my device for the second time, the screen goes black and the hard drive seems to stop too, but the mo-bo isn't asleep and the fan keeps spinning.

Send me MacBook.zip

[Mister3000]

Hey mald0n..

Please don’t forget about me.

Using your first dsdt my battery now works but Still the computer freezes with sleep

And shut down.

I’ve already sent a couple of beers your way for your time and knowledge.

Just so you know I still have my old dsdt file that worked with Yosemite. In case you want to compare I could also attach it.

Thanks

[MaLd0n]

[ref]bskim[/ref], if work with old DSDT use same usb patches

Added in 24 seconds:

[ref]Mister3000[/ref], forget yosemite, apple change all after el capitan

[Mister3000]

[ref]bskim[/ref], if work with old DSDT use same usb patches

Added in 24 seconds:

[ref]Mister3000[/ref], forget yosemite, apple change all after el capitan

Ok, thank you.

You have any ideas to resolve my shutdown and sleep problem ?

[Tahiry]

Good Day fellow hackintoshers,

This is my first time using Olarila, my hack is working okay but there are a few issues I am having.

1- none of my usb 3 ports are working at full speed.

2- when I shutdown, it restarts right off. When I try to put it to sleep, only the monitor turns off, everything else seems to be still running (including fans).

This is my "Send me" file from the Run.me app.

Can I get some help?

Best regards.

Hardware:

Gigabyte B360m DS3H

Sapphire RX580

i3 8100

Send me tahirys-imac.lan.zip