DSDT patch requests

Q: What is a Hackintosh?

A non-Apple computer configured to run macOS using compatible PC hardware combined with a custom bootloader and configuration files to emulate a real Mac environment.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA). It is generally not illegal for personal experimentation but not permitted for commercial use.

Q: What hardware is best for a Hackintosh?

The best hardware closely matches real Apple systems, with Intel CPUs (6th Gen to Core Ultra), AMD Radeon GPUs, compatible chipsets, and Intel-based Wi-Fi cards offering higher success rates.

Q: Can I build a Hackintosh with an AMD CPU?

Yes, macOS can run on AMD Ryzen CPUs using kernel patches, but Intel CPUs provide better native compatibility.

Q: What is OpenCore?

OpenCore is a modern Hackintosh bootloader that provides near-native macOS behavior and is the recommended bootloader for new installations.

Q: Is Clover still supported?

Yes, Clover is still supported but less recommended compared to OpenCore for modern systems.

Q: Which macOS versions support Hackintosh?

Hackintosh systems support macOS versions from Leopard up to recent releases, depending on hardware compatibility.

Q: Do NVIDIA graphics cards work on Hackintosh?

Only older NVIDIA GPUs work on older macOS versions; modern NVIDIA GPUs are incompatible with current macOS releases due to lack of driver support.

Q: What is an EFI folder?

The EFI folder contains the bootloader, drivers, kexts, and configuration files required to boot macOS on a Hackintosh.

Q: What are kexts?

Kexts (kernel extensions) are drivers that enable hardware functionality such as audio, Ethernet, USB, and graphics.

hulliver · January 20, 2019

MaLd0n wrote: ↑20 Jan 2019, 01:37

hulliver, open ioreg and check if u see bluetooth inside device XHC

Bom dia Don,

i did what you suggested and i did not find any bluetooth inside xhc after the update. By the way i did an update to 10.14.2 and everything fine as you told. I looked around the internet and found somebody having the same motherboard for hackintosh. after everything working for the guy's status was like it can be seen on the first screenshot:

I found his annotations that i cut short:

Status: USB Ports
Mojave seemed to recognise all the USB 2 and USB 3 ports. The four USB 3.0 Type-A ports on the I/O Shield are governed by a USB Hub at HS07 and SS07, so they seem to count as one USB 2 port and one USB 3 port. When we count up all the USB ports on the I/O Shield we get 2 dedicated USB 2 ports, 2 USB 3.1 ports, and 4 USB 3.0 ports on a Hub (these 4 ports count as 1). So we have 5 HS ports and 3 SS ports on the I/O Shield.

And we have 2 USB 3.0 ports on the front I/O panel and a Type-C also on the front. These are an additional 3 HS ports and 3 SS ports. And HS14 is internal Bluetooth.

Sum total: 8 HS ports, 6 SS ports, 1 Blutetooth port (counts as HS port) --- this is a nice total of 15.

This V2 SSDT keeps HS14 port active (Intel CNVi Bluetooth). But if you plan to use a Broadcom WiFi/BT card with the Bluetooth USB cable plugged into the USB 2.0 header on the motherboard (the header is located to the left of FAN_PUMP) then use SSDT-UIAC-DESIGNARE-Z390-V3 instead (copy the .aml file not the .dsl file to CLOVER/ACPI/patched folder).

SSDT-UIAC-DESIGNARE-Z390-V3.aml.zip

Status: Fully Working / This patch did not work for me

Status: Socket 1 WiFi/Bluetooth card

As expected, Mojave has no support for Intel WiFi/Bluetooth chips so this card does not work.

Status: Does not work (as expected). Will see if a suitable Broadcom card is available or if someone is nice enough to write a driver for this.

OK Broadcom natively Working

Still need to test Continuity/Handoff. However, USB port 14 must be disabled and port 11 must be enabled. This is handled by the attached Custom SSDT SSDT-UIAC-DESIGNARE-Z390-V3. Be careful to copy the .aml file to your CLOVER/ACPI/patched folder. The .dsl file is for reference only -- it provides comments for every port.

Status: WiFi/BT working, but further tests pending.

Update: 12-12-2018: Based on this post, I think this is a done deal.

Status: Fully Working.

On my system it looks now like this:

Before the last patches both port 11 & 14 were active . (I rolled back to see) where as i understand it should be only Port 11 for internal and USB2.

I attached the last sendme file as well. Por favor give me a fix for the missing port(s) and bluetooth.

Bom domingo para vc

Sendme5.zip

intraco · January 20, 2019

Hi, I hope and you can help me. I need the DSDT for my computer, when it goes into sleep mode when it wakes up it restarts. I have macOS Mojave 10.14.2 many thanks in advance

Specifications

gigabyte GA-H170-D3HP

Itel Core i3-7100

GPU AMD Radeon HD 7970 3GB

RAM DDR4 8GB

Added in 9 minutes 7 seconds:

This is my Clover in case you want to take a look. Thanks again.

DSDT-50460054.aml.zip

CLOVER.zip

peppsss98 · January 20, 2019

[ref]hulliver[/ref], open ioreg and check if u see bluetooth inside device XHC

Added in 4 minutes 48 seconds:

[ref]peppsss98[/ref], DSDT.aml.zip

if dont work u need check what device nvidia stay

I just reinstalled everything with "CLOVER" of "NOTEBOOK WITH SKYLAKE, KABYLAKE..." and the patches works and I've installed it on my ASUS! So thank you so much! Perhaps I need the VoodooI2C patches on DSDT (I use VoodooI2C and VoodooI2CFTE)..can you please patch DSDT to make touchpad work? Thank you so much!

onemanosx · January 20, 2019

I need the VoodooI2C patches on DSDT

follow preparatory steps here, first. https://Olarila.com/forum/viewtopic.php?f=46&t=8087

Find out if trackpad is I2C device.

MaLd0n · January 20, 2019

[ref]pinkertonb95[/ref], DSDT.aml.zip

Notebooks Useful Links

-Audio

">

-Battery

https://Olarila.com/forum/viewtopic.php?f=28&t=8208

-Video

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v151/

-Brightness

https://bitbucket.org/RehabMan/applebacklightfixup

-I2C

https://github.com/alexandred/VoodooI2C

Added in 11 minutes 42 seconds:

[ref]Synerror[/ref], CLOVER.zip

Notebooks Useful Links

-Audio

">

-Battery

https://Olarila.com/forum/viewtopic.php?f=28&t=8208

-Video

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v151/

-Brightness

https://bitbucket.org/RehabMan/applebacklightfixup

-I2C

https://github.com/alexandred/VoodooI2C

Added in 1 minute 46 seconds:

[ref]hulliver[/ref], just remove HS11 in uia_exclude flag in boot tab

Added in 1 minute 49 seconds:

[ref]intraco[/ref], DSDT.aml.zip

DSDT.aml.zip

ph33rz · January 20, 2019

System Specifications

Asus Rog Rampage V Edition 10

Core i7 5820k

Nvidia GTX1080

Send me ph33rzs-iMac.zip

MaLd0n · January 20, 2019

[ref]ph33rz[/ref], use our clover folder for x99, reboot and extract new SEND_ME

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

akam78 · January 20, 2019

Hello

it's been 2 weeks that I try to operate the touchpad,

unsuccessful

can you help me I join the runme file

thank you

MaLd0n · January 20, 2019

[ref]akam78[/ref], DSDT.aml.zip

peppsss98 · January 20, 2019

[ref]akam78[/ref], DSDT.aml.zip

MaLd0n can you please patch this other DSDT?

Another Asus, but different specs: Asus TP550LD

Cpu: Intel I7-4510u

Integrated Gpu: Intel HD 4400

Discrete Gpu: Nvidia GeForce 820m

Ram: 4gb DDR3

I just need the DSDT patch to disable Nvidia GPU because I'm trying to install High Sierra..thank you so much again!

origin.zip

MaLd0n · January 20, 2019

[ref]peppsss98[/ref], DSDT.aml.zip

u need check what device i need disable, check via windows

ademturk · January 20, 2019

a

Added in 1 minute 21 seconds:

clover

CLOVER.zip

akam78 · January 20, 2019

[ref]akam78[/ref], DSDT.aml.zip

re.

you are extraordinary. thanks for the touchpad

the sound works but the internal microphone does not work? I try several ID 3 11 14 28 none works the codec is "ALC235",

and also the wifi I try things but nothing "Wirless 7265" neither in mojave nor high sierra you have a solution?

MaLd0n · January 21, 2019

[ref]akam78[/ref], DSDT.aml.zip

one more fix

intel wireless? don't work

audio u can check a applehda patcher if any layout-id from AppleAlc work

Amfkuna · January 21, 2019

[ref]Amfkuna[/ref], DSDT.aml.zip

Hi MaLd0n

If U patch my dsdt, so U remove serial port?

I need serial port on my hacintosh for programming AVR and serial logging.

In bios I have set serial to AUTO IRQ.

thx for reply

DSDT.aml-Z270-tomahawk.zip

DSDT-orig.aml.zip

MaLd0n · January 21, 2019

[ref]Amfkuna[/ref], DSDT.aml.zip

chicoray · January 21, 2019

Hello,

I'm trying to get High Sierra running on my setup.

not that easy on 5960x

I still have troubles with USB3, not working at all.

Also, the performance of the CPU could be a little better.

Any change i try to make in the config.plist or EFI results in macos crashing at startup..

Could you please have a look ?

Send me iMac-Pro-de-Richard.zip

MaLd0n · January 21, 2019

[ref]chicoray[/ref], DSDT.aml.zip

remove FakePCIID.XHCIMux

use our clover folder for x99

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

--USB Fix

https://Olarila.com/forum/viewtopic.php?p=65287#p65287

Correct Patches x99

https://www.insanelymac.com/forum/topic/335650-kernelandkextpatches-1013x1014x-x99/

piki4454 · January 21, 2019

Good day, gents!

I would like to install High Sierra onto my Intel NUC 3217IYE 16 RAM, HD4000 GPU, Intel Ethernet, AR5b195 WiFiBT combo card.

I need custom DSDT and SSDT. Kindly asking for help, because I couldn't compile it without errors by myself.

Attached, see the output of RunMe.App.

Many thanks!

Send me NUC3128.zip

MaLd0n · January 21, 2019

[ref]piki4454[/ref], DSDT.aml.zip

use our clover folder for serie 7, notebook or desktop

Sign In

DSDT patch requests

Recommended Posts

hulliver

intraco

peppsss98

onemanosx

MaLd0n

ph33rz

MaLd0n

akam78

MaLd0n

peppsss98

MaLd0n

ademturk

akam78

MaLd0n

Amfkuna

MaLd0n

chicoray

MaLd0n

piki4454

MaLd0n

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity