DSDT patch requests

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

ivandmpk · January 17, 2019

Daniel Can you do it once again my friend

Send me ivandmpks-iMac.zip

MaLd0n · January 17, 2019

[ref]ivandmpk[/ref], DSDT.aml.zip

hulliver · January 17, 2019

intelhdgraphics in bios

Ok the updated clover zip does not work. the system does not come up any more. some kind of acpi error several times and then it gets stuck. even from the stick it does not start anymore. i do it again. just to mention i changed the bios settings already before. so that had worked. i will crawl back to the clover zip that you gave me before.

MaLd0n · January 17, 2019

[ref]hulliver[/ref], post one photo using -v

djgreenfire · January 18, 2019

Hi Everyone! can you please help me to make a DSDT file?

Can someone help me to get my intel graphics work? I have set every right in the bios but it won't show up in MacOs

Can someone help me to get my wifi-card connect to the 5ghz network?

best regards

Send me Christophs-iMac-2.zip

MaLd0n · January 18, 2019

[ref]djgreenfire[/ref], DSDT.aml.zip

hulliver · January 18, 2019

[ref]hulliver[/ref], post one photo using -v

Hello Don,

here are the 2 screenshots that i took and the last sendme file. First screenshot is the system freeze. Second the halt that i mentioned before. Did i grab the wrong clover .zip? Do you think it will be safe to update to 10.14.2 after resolving this issue here? Thank you for your great work & cumprimentos

Sendme3.zip

MAP002 · January 18, 2019

Hi! Thanks so much for offering this help! I've sent you some beer money, enjoy it in good health.

My main goals, aside from a stable, fast system, is to get all of the possible hardware encoding options (h.264, 8 bit HEVC) on my Skylake processor and to get my USB ports working stably and under the port limit.

Added in :

Hi! Thanks so much for offering this help! I've sent you some beer money, enjoy it in good health.

My main goals, aside from a stable, fast system, is to get all of the possible hardware encoding options (h.264, 8 bit HEVC) on my Skylake processor and to get my USB ports working stably and under the port limit.

Let me know if you need any other info.

Send me Michaels-iMac.zip

MaLd0n · January 18, 2019

[ref]MAP002[/ref], replace full clover folder, reboot and extract new SEND_ME

CLOVER.zip

Added in 56 seconds:

[ref]hulliver[/ref], check if u disable intelhd system work fine, OtherOS need set

MAP002 · January 18, 2019

[ref]MAP002[/ref], replace full clover folder, reboot and extract new SEND_ME

CLOVER.zip

Done. And thanks for the quick reply.

Send me Michaels-iMac.zip

hulliver · January 18, 2019

[ref]MAP002[/ref], replace full clover folder, reboot and extract new SEND_ME

CLOVER.zip

Added in 56 seconds:

[ref]hulliver[/ref], check if u disable intelhd system work fine, OtherOS need set

Hello Don, System works with disabled intelhd and AMD card / OtherOS is set.

Anything else? it still boots only through preboot not standard mac os button.

djgreenfire · January 18, 2019

[ref]djgreenfire[/ref], DSDT.aml.zip

Wow that was fast! Thank you very much!!

djgreenfire · January 18, 2019

Hey MaLd0n,

Is it possible that you can create the dsdt again for me? I send you the wrong files SORRY

Send me Christophs-iMac-2.zip

dunster · January 18, 2019

panic on shutdown and restart

and if there is something else you see that has to be different please setup

thank you

Send me extras-iMac.zip

MAP002 · January 18, 2019

[ref]MAP002[/ref], replace full clover folder, reboot and extract new SEND_ME

CLOVER.zip

Another question... I've got a NvME drive, a Samsung MZ V6E2 S24 A450BW SSD 960 Evo Nvme M.2 250 MB. I use that to boot another install of Mojave 10.14.2.

I've also got a SEDNA - PCI-Express Low Profile IEEE 1394b FireWire 3 Port Card (2 E 1I) that I use to run an audio interface.

I tried copying the 2nd clover directory you sent me to the EFI directory of that drive to boot from, but when clover tries to load the OS, I get an error about being unable to determine the state of the Firewire 800 connection and defaulting to secure, then the boot process freezes.

So, my question is, Does something need to change to the config to allow it to boot from that drive?

And a follow up question might be, if not, do you have a clue as to why I would get that error?

MAP002 · January 18, 2019

Here's a screenshot of that error.

Also happens with the CHIPSET SERIES 10, 20 and 30 (SKYLAKE / KABYLAKE / COFFEELAKE) basic Clover config from the NVME drive.

Probably something simple I'm missing.

MaLd0n · January 18, 2019

[ref]MAP002[/ref], Remove all old send_me files in ur desktop, reboot and extract again, app merge files

Added in 24 seconds:

[ref]hulliver[/ref], extract new SEND_ME with last files

MAP002 · January 18, 2019

[ref]MAP002[/ref], Remove all old send_me files in ur desktop, reboot and extract again, app merge files

Here you go. Booting from the 1 TB SSD (non NVME) using the last Clover folder you sent me.

Send me Michaels-iMac.zip

MaLd0n · January 18, 2019

[ref]djgreenfire[/ref], DSDT.aml.zip

Added in 4 minutes 32 seconds:

[ref]dunster[/ref], DSDT.aml.zip

Added in 1 minute 6 seconds:

[ref]MAP002[/ref], without firewire work?

Added in 4 minutes 11 seconds:

[ref]MAP002[/ref], DSDT.aml.zip

DSDT.aml.zip

MAP002 · January 18, 2019

[ref]MAP002[/ref], without firewire work?

Firewire's working fine booting off this drive. Booting off my NVME drive, the system locks up with that firewire error, so I can't get into the OS without booting from the simple Clover install on my Mojave install USB stick.

Added in 17 minutes 17 seconds:

[ref]MAP002[/ref], without firewire work?

To be clear, it's all working fine booting from this drive. It's only not working when I try to boot from the NVME using the CHIPSET SERIES 10, 20 and 30 Clover folder in the NVME's EFI volume.

Added in 1 minute 31 seconds:

I should add that I was able to boot from that drive before replacing the old Clover config with the CHIPSET SERIES 10, 20 and 30 version.

MaLd0n · January 18, 2019

[ref]MAP002[/ref], what ur NVME, in some cases need a patch for work

MAP002 · January 18, 2019

Samsung MZ V6E2 S24 A450BW SSD 960 Evo Nvme M.2 250 MB

MaLd0n · January 18, 2019

[ref]MAP002[/ref], disconnect all HDD/SSD, use only one, try it

MAP002 · January 18, 2019

Just to triple check, I just booted to the Mojave install on that NVME drive using Clover on the Mojave USB installer I created with unishit.

Added in 1 minute 37 seconds:

[ref]MAP002[/ref], disconnect all HDD/SSD, use only one, try it

OK, will disconnect my other drives and retry the NVME with the CHIPSET SERIES 10, 20 and 30 Clover folder.

MagicNAS · January 18, 2019

Hey MaLd0n,

Is it possible that you can create the dsdt for me.

everything works except for sleep.

I try to compile but give me error /9718, 6086, Not a control method, cannot invoke (AAXB is a RegionField)/

Thank you.

Send me MagicNASs-Mac-Pro.zip

Sign In

DSDT patch requests

Recommended Posts

ivandmpk

MaLd0n

hulliver

MaLd0n

djgreenfire

MaLd0n

hulliver

MAP002

MaLd0n

MAP002

hulliver

djgreenfire

djgreenfire

dunster

MAP002

MAP002

MaLd0n

MAP002

MaLd0n

MAP002

MaLd0n

MAP002

MaLd0n

MAP002

MagicNAS

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity