DSDT patch requests

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

pteix · December 7, 2018

Alguém pode me ajudar?

queria saber se minhas configs estão corretas, não sei se o meu DSDT ta certo me deem uma luz

Send me MacBook-Pro-de-Rovani.zip

ntntee · December 7, 2018

Hie i need help after a full patch the pc was worikng fine but now when i hold command button and try to move my mouse cursor using the track pad it will not move rather it start to scrole if it is on a scrollable window but with external mouse it works fine.

Mirone · December 7, 2018

sleep(its not working).

try this:DSDT.aml.zip

Added in 29 minutes 48 seconds:

can u patch my dsdt pls ?

try this:CLOVER.zip

IaryD · December 7, 2018

Admin created DSDT for me the last week-thanks a lot. But there have still been 2 problems.

Sometimes, after "wake up", my monitor stays dark - the system is obviously running but probably there is no signal. When I switch the monitor on and off few times (about 5 times or so), then the signal comes there and it runs without a problem.

The second problem - sometimes, when I want the computer to sleep, all the peripherals switch off, monitor gets dark and it seems that the computer sleeps. But there`s no "clicking" sound of switching off the computer (like when I switch the computer off or when it goes sleeping). The only possibility is to hold the power button to switch the computer off completely. Please, could you help me anyhow? Thank you in advance.

Send me Iarys-iMac.zip

MaLd0n · December 7, 2018

[ref]tarantababu2002[/ref], DSDT.aml.zip

Added in 59 seconds:

[ref]firestruck[/ref], some intelhd graphics, sleep don't work

Added in 5 minutes 45 seconds:

[ref]andrejsp[/ref],

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441

Added in 1 minute 14 seconds:

[ref]brack182[/ref], ? u dont "enter in" bios?

DSDT.aml.zip

Zizo 2018 · December 7, 2018

A

Hi, can you please help patch my DSDT?

Attached my DSDT dump from Clover (all files) and the Send Me.app file.

https://Olarila.com/forum/download/file.php?id=14936&sid=c7338659f4a062589b24b22e03ca58c8

tarantababu2002 · December 7, 2018

[ref]tarantababu2002[/ref], DSDT.aml.zip

Hi [ref]MaLd0n[/ref], same results on usb ports

MaLd0n · December 7, 2018

[ref]gustavo.bhr[/ref], DSDT.aml.zip

change GFX0 to IGPU

47465830

49475055

change SAT0 to SATA

53415430

53415441

change EHC1 to EH01

45484331

45483031

change EHC2 to EH02

45484332

45483032

Added in 8 minutes 55 seconds:

[ref]pteix[/ref],

DSDT.aml.zip

change GFX0 to IGPU

47465830

49475055

change HDAS to HDEF

48444153

48444546

change HECI to IMEI

48454349

494d4549

change SAT0 to SATA

53415430

53415441

Added in 2 minutes 52 seconds:

[ref]IaryD[/ref], reproduce the problems and run in terminal

log show --style syslog | fgrep "Wake reason"

Added in 4 minutes 38 seconds:

[ref]Zizo 2018[/ref], DSDT.aml.zip

Added in 48 seconds:

[ref]tarantababu2002[/ref], is common, bro, some work with USB 2 and some USB 3, check what is usb 3 and use it

DSDT.aml.zip

tarantababu2002 · December 7, 2018

[ref]tarantababu2002[/ref], is common, bro, some work with USB 2 and some USB 3, check what is usb 3 and use it

Understood bro thank you so much. Last Question : Is the change necessary in Clover, or should it remain (ACPI-KextsToPatch ...?

MaLd0n · December 7, 2018

[ref]tarantababu2002[/ref], extract new SEND_ME, i need check

tarantababu2002 · December 7, 2018

[ref]tarantababu2002[/ref], extract new SEND_ME, i need check

Send me Orhan-iMac.zip

MaLd0n · December 7, 2018

[ref]tarantababu2002[/ref],

use

ig-platform-id 0x19120001

Check InjectIntel

shikigva=60

ur intelhd stay in full loadm don't need, we need it only for hardware acceleration

tarantababu2002 · December 7, 2018

[ref]tarantababu2002[/ref],

use

ig-platform-id 0x19120001

Check InjectIntel

shikigva=60

ur intelhd stay in full loadm don't need, we need it only for hardware acceleration

did it, Intel HD no longer appears on the system report screen, but acceleration is running. Thank you for helping me buddy

3catsinky · December 8, 2018

I need patches for unknown processor, fan control, and using internal graphics along with my Vega 64. Specs:

Aorus Z390 Pro

i9 9900K

Sapphire Vega 64

EVGA AIO 240 Cooler

32gb DDR4 3600 RAM

Running 10.4.2, everything works, USB, Ethernet, WIFI, iMessage, Audio.

ACPI copy.zip

MaLd0n · December 8, 2018

[ref]tarantababu2002[/ref], yes, check IGPU in ioreg

Added in 6 minutes 18 seconds:

[ref]3catsinky[/ref], DSDT.aml.zip

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

fan control via bios

hackluv · December 8, 2018

Hi! It's my first time install Macintosh on my PC. I need Patch DSDL and Kext for my Macintosh. Please help me! Thanks you So much

My Mainboard: Z370 AORUS Gaming 5

CPU: I7 8700K

VGA: Asus GTX 1060

This is my Run Me file and DSDT file:

DSDT.zip

Run Me.zip

gustavo.bhr · December 8, 2018

[ref]gustavo.bhr[/ref], DSDT.aml.zip

change GFX0 to IGPU

47465830

49475055

change SAT0 to SATA

53415430

53415441

change EHC1 to EH01

45484331

45483031

change EHC2 to EH02

45484332

45483032

Thanks Mald0n for the DSDT and patches! At least one step is finally done. Now I'm trying to get stability and wifi on my system. IDK why, but every boot is a surprise. Sometimes it won't load Kernel, other BT stops working, as well as USB ports. Some boots I've got both screens working without artifacts, other times just my monitor screen. Is this normal on Hackintoshes or OSX on N5110 should be more stable?

Another question is if SSDT are necessary. I've tried to use one from multishit but I got KP. Is there any point I should focus to get rid of these frequent freezes/instability?

I've tried a deep search on this forum and Insanelymac plus tonycrap but everything sounds outdated regarded to my laptop. :/

Anyway, thanks again for this awesome work you're doing here!

3catsinky · December 8, 2018

THANK YOU!!!!! haha, now where do i put the file? ACP folder?

Was able to created a patched folder in the ACPI, but boot results in Kernel panic.

MaLd0n · December 8, 2018

[ref]hackluv[/ref], DSDT.aml.zip

use our clover for chipset 300, check Olarila.app

Added in 36 seconds:

[ref]gustavo.bhr[/ref], extract new send me

Added in 43 seconds:

[ref]3catsinky[/ref], clover.acpi.patched

post one photo

IaryD · December 8, 2018

Added in 2 minutes 52 seconds:

[ref]IaryD[/ref], reproduce the problems and run in terminal

log show --style syslog | fgrep "Wake reason"

It hasn`t happened since yesterday...I use power button for waking up now instead of my keyboard which I used before. Is it possible that the different way of waking up could help? Here are last lines of the log of the terminal command-I`m sure that there was the problem on 6/12/2018 :

2018-12-06 22:39:38.348774+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC

2018-12-06 23:13:13.918525+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC

2018-12-06 23:13:13.918526+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC

2018-12-07 17:57:21.461154+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC

2018-12-07 17:57:21.461155+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC

2018-12-07 19:22:51.533336+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PWRB (User)

2018-12-07 20:08:57.597589+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PWRB (User)

2018-12-07 20:08:57.597590+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PWRB (User)

2018-12-07 21:06:53.276042+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PWRB (User)

2018-12-07 21:56:44.218536+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC

2018-12-07 21:56:44.218540+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XHC

2018-12-07 22:00:46.490639+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PWRB (User)

2018-12-07 22:48:00.526750+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PWRB (User)

2018-12-08 16:08:32.883499+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PWRB (User)

2018-12-08 16:08:32.883500+0100 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PWRB (User)

I`ll send the log again if it happens again.

MaLd0n · December 8, 2018

[ref]IaryD[/ref], remove _prw in XHC device and use power button for wake

hackluv · December 9, 2018

What happened with my browser? I tried on safari, firefox, chrome..... but it is the same problem.

MaLd0n · December 9, 2018

[ref]hackluv[/ref], u need a correct video config

hackluv · December 9, 2018

[ref]hackluv[/ref], u need a correct video config

Can you help me where I can fix it?

adibaulia · December 9, 2018

Hi! I have been install hackintosh mojave Olarila in my laptop Acer E5 475G. i need patch dsdt and etc to fix my problem with sleep, fn+brightness and everything that can be fix with this.

My specs are:

i5 7200U

GT940mx (not working)

8GB RAM DDR4

This is my Run Me file:

Send me adibaulias-MacBook-Pro.zip

Thank you!

Sign In

DSDT patch requests

Recommended Posts

pteix

ntntee

Mirone

IaryD

MaLd0n

Zizo 2018

tarantababu2002

MaLd0n

tarantababu2002

MaLd0n

tarantababu2002

MaLd0n

tarantababu2002

3catsinky

MaLd0n

hackluv

gustavo.bhr

3catsinky

MaLd0n

IaryD

MaLd0n

hackluv

MaLd0n

hackluv

adibaulia

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity