DSDT patch requests

[MaLd0n]

[ref]xdevillived666[/ref], but in DSDT or SSDT ur apply patches VOODOOI2C?

[erkan_kenc]

[ref]erkan_kenc[/ref], u can put new hardware without problems, just change ig-platform-id to 59120003

CLOVER.zip

 

Thank you Mald0n, your clover folder works fantastic, besides the audio.. HDMI audio works great. Couldn't check the outputs on the rear panel, but the front headphone out of the case is not working properly, it's crackling and have a bad sound quality.. I've already tried different layout numbers of the ALC1220 but all working in the same way. The output works fine on Windows by the way. Do you have any solution for that?

On the other hand I used apfs, then reinstalled with hfs.. Both works same.. Do you have an opinion for that which one should I use, If apfs works good, should I go for it? Or hfs is better at all?

Build:

Z370XP SLI (F11)

i7 8700

[M0001]

Greetings:

I had a 1050-TI but ... CUDA, Mojave ... ahem.. So I put this AMD card in until I get a better one..

It boots in Safe Mode, but will panic with the last thing being @kec.corecrypto

Help

You helped me on InsanelyMac during a time when the database kept having issues. Thanks for that, too!

Send me Z370-iMac.zip

[MaLd0n]

[ref]erkan_kenc[/ref], use APFS

for audio, just use other id, check procedure here

">

Added in 3 minutes 49 seconds:

[ref]M0001[/ref], DSDT.aml.zip

use our clover folder for serie 10,20,30

[xdevillived666]

[ref]xdevillived666[/ref], but in DSDT or SSDT ur apply patches VOODOOI2C?

 

No sir. My stuff was working just using kexts. Elan 12OO pad. I havent had any issues

[MaLd0n]

[ref]xdevillived666[/ref], good

[xdevillived666]

[ref]xdevillived666[/ref], good

 

all is working except native audio. Codec isnt officially supported but I received a custom built alc. Just trying to figure out the audio not working, though slider , volume icons, and volume settings work. I do get audio out of hdmi, though. Thank you guys for all your help and everything you do

[MaLd0n]

[ref]xdevillived666[/ref],

[S3R14L]

MaLd0n, pronto, chegou a RX 580 Pulse, coloquei ela agora...

Poderia olhar o DSDT mais uma vez por gentileza?

Devo colocar o .aml que você manda em clover>efi>ACPI>Patched ou clover/acpi/patched ? Basta colocar e reiniciar, correto?

E por ultimo, instalei utilizando HFS+ , posso usar o comando e converter pra APFS ou devo instalar do zero?

Muito Obrigado mais uma vez!

e ta na hora de te ajudar tomar Heineken, chega de Kaiser hein!

Send me S3R14L.zip

[itsJoshuaBlaine]

[ref]itdk92[/ref], extract original DSDT with F4 key in clover boot screen, files generated in clover/acpi/origin

Added in 47 seconds:

[ref]blackd[/ref], VMWare

Added in 2 minutes 29 seconds:

[ref]itsJoshuaBlaine[/ref], extract original tables

Added in 2 minutes 33 seconds:

[ref]Costavaldes[/ref], DSDT.aml.zip

 

How so do you mean extract original tables? My apology! Do you mean extract them by using F4 via Clover, and include them in a separate archive for you?

[MaLd0n]

[ref]S3R14L[/ref], use somente essa pasta Clover para um perfeito "hardware acceleration"

CLOVER.zip

[itsJoshuaBlaine]

How so do you mean extract original tables? My apology! Do you mean extract them by using F4 via Clover, and include them in a separate archive for you?

 

Or, extract via Terminal using "iasl -d"?

[MaLd0n]

[ref]itsJoshuaBlaine[/ref], use F4 key in clover boot screen, clover extract untouched tables, inside system extract with clover patches etc

[cuongth]

I have dell 3268 installed Mojave. All is working except sleep, it shutdown and restart from wake.

Please help.

send_me_dell_3268.zip

large_files.zip

CLOVER_large_file.zip

[M0001]

Just about perfect.

I used your 10 20 30 series, put DSDT.aml in patched, added an SMBIOS profile of iMacPro 18,1 ... just the video has weird things going on in places, plus it only shows 7MB of VRAM.

When the cursor passes over a button, you see a square behind it, when flipping through the System Preferences window, you'll see areas to the right jumping around next to the window.

My second monitor isn't working either, though I suspect that has to do with the video driver in general.

Send me Z370R2-iMac.zip

[MaLd0n]

[ref]cuongth[/ref], DSDT.aml.zip

use our clover folder for serie 10,20,30

extract new SEND_ME after reboot

[pepitopito]

Hi Maldon im lorenzocold.I donate for you with paypal now.I need dsdt.Thanks

Added in 1 minute 37 seconds:

My mobo is gigabyte GA-Z170X-GAMING 5 AND MY GPU IS RADEON RX580

Added in 36 seconds:

MY CPU IS I5 6600K

Added in 58 seconds:

I NEED CLOVER FILES

Send me iMac-de-Lorenzo.zip

[MaLd0n]

[ref]M0001[/ref], how u enable ur video in previous folder?CLOVER.zip

 

Added in 22 minutes 24 seconds:

[ref]pepitopito[/ref], use only this clover folder with last clover version

CLOVER.zip

 

enable IntelHDGraphics in bios too for perfect hardware acceleration

CLOVER.zip

[ryansabaybay]

[ref]ryansabaybay[/ref], CLOVER.zip

 

Hello, my motherboard doesn't came with HDMI, only Display port and my monitor is HDMI, so I used DP-HDMI converter, but it does not detect the DP-HDMI, so I used the DVI, but the display output is like inverted color , my question is do I need a motherboard with HDMI?

[MaLd0n]

[ref]ryansabaybay[/ref], buy one RX560 xD

https://www.newegg.com/Product/Product.aspx?Item=N82E16814932003&cm_re=radeon_rx560-_-14-932-003-_-Product&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&cm_sp=&AID=11552995&PID=8850007&SID=

[ryansabaybay]

[ref]ryansabaybay[/ref], buy one RX560 xD

But I want a small form factor , that is why I bought a mini ITX board.

How about if I will use an i5 , will the igpu works?

[MaLd0n]

[ref]ryansabaybay[/ref], try converter, i think work

[indopryde]

[ref]indopryde[/ref], DSDT.aml.zip

 

thank you very much sir.

[cuongth]

[ref]cuongth[/ref], DSDT.aml.zip

use our clover folder for serie 10,20,30

extract new SEND_ME after reboot

So, I have to place the DSDT.aml file into ACPI/Patches new folder then upload new SEND_ME here for you to check?

Thank you

[M0001]

How did I do video before? ...

[ref]M0001[/ref], how u enable ur video in previous folder?

When it was in Safe Boot, it was like 16 bit color, very pokey, and only supported one monitor. What I have now is at least full color, but still only one monitor. Should be 4K, it's seeing it as half that.

Am I able to use either an nVidia 1050 Ti or GTX 650 instead of this tiny old AMD 6570? It's only showing me 1280 x 950.

It probably can't do 4K.

If I'm reading correctly, the older GTX cards can use some kind of workaround for Mojave?