Jump to content

Recommended Posts

  • Administrators
Posted

Sorry my eyes and brain are REALLY bad

thanks in advance x3

put kexts in clover/kexts/other and dsdt in clover/acpi/patched, remove old kexts


after it, extract new send_me

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

  • Administrators
Posted

hi, if I understood well, I replaced the clover folder with your for 9 series. The only change to get a boot was npci=0x2000 to boot.

Thanks, again.

use it, reboot and extract new SEND_ME

CLOVER.zip

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

Posted

First thanks

I struggling with donation because I am Brazilian, I take time to understand that is brazuca site, shame on me.

I got a loop

Ioreg dump fried retrying

increase delay x2 or ioreg dump

So?

  • Administrators
Posted

u need permissions in mojave, high sierra - no, just don't touch in nothing, wait finifsh

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

  • Administrators
Posted

Attachments

Send me XXXs-iMac.zip

(3.37 MiB) Not downloaded ye

remove fakepciid xhcimux


Added in 8 minutes 11 seconds:

hi, I can't fix my laptop graphics problem. It shows only 7mb vram. Also i was unable to fix touchpad and audio output. Please look at my zip file

DSDT.aml.zip

Video

https://www.insanelymac.com/forum/topic/335018-release-intel-fb-patcher-v133/

Audio, inject via clover

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

  • Administrators
Posted

removed from library/extensions right?

thanks again

use it and enjoy

DSDT.aml.zip

 

perfomance fix patch u need check in InsanelyMac

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

Posted

@MaLdOn , I need your help.

My hackintosh works great (using virtualsmc instead of fakesmc) , I have only one issue.

When usb attached and laptop goes to sleep , system hangs (may be just the display , cause fans are running).

Can you check , please ?

Send me MacBook-Pro.zip

Posted

Hello [ref]MaLd0n[/ref], audio is now working but seems to sound low, i can't say it at all becouse never heard the speakers with Windows. Headphones sounds perfect.


I changed the wifi card to BCM94352Z. Wifi is OK but bluetooth don't connect.

Brighness keys are not working.

Sleep don't work also. Wakes up just when the status light stops, so never sleeps.


Can you check, please?

Send-me-MacBook-Pro-de-Ricard.zip

Posted

Thanks B3MD0N.

I already have PAYPAL account I and cannot do the donation because the link is for non Brazilians.

Can you send me or put a direct link for Brazilian donors?

  • Administrators
Posted

@MaLdOn , I need your help.

My hackintosh works great (using virtualsmc instead of fakesmc) , I have only one issue.

When usb attached and laptop goes to sleep , system hangs (may be just the display , cause fans are running).

Can you check , please ?

without usb connected work good?


Added in 4 minutes 12 seconds:

Hello MaLd0n, audio is now working but seems to sound low, i can't say it at all becouse never heard the speakers with Windows. Headphones sounds perfect.


I changed the wifi card to BCM94352Z. Wifi is OK but bluetooth don't connect.

Brighness keys are not working.

Sleep don't work also. Wakes up just when the status light stops, so never sleeps.


Can you check, please?

BT check here

https://bitbucket.org/RehabMan/os-x-brcmpatchram


Brightness key u need debug for check what keys we need patch

https://bitbucket.org/RehabMan/os-x-acpi-debug


u need check what device cause problem with sleep, run my app and check logs, have all there


Added in 32 seconds:

I already have PAYPAL account I and cannot do the donation because the link is for non Brazilians.

Can you send me or put a direct link for Brazilian donors?

use email ;)

danielnmaldonado@yahoo.com.br

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

Posted

how much points in geekbench?

 

Hello!


22336 multi 5762 single @ stock

Is it good?


I have another request! for a Lenovo Thinkcentre m710q Tiny

CPU: core i3 7100T

Proprietary motherboard with chipset B250

8 gb ram

intel 630 video


Thanks!

Send me iMac-de-Ivan.zip

  • Administrators
Posted

I have another request! for a Lenovo Thinkcentre m710q Tiny

CPU: core i3 7100T

Proprietary motherboard with chipset B250

8 gb ram

intel 630 video


Thanks!

DSDT.aml.zip

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

Posted

kostas20 wrote: ↑

@MaLdOn , I need your help.

My hackintosh works great (using virtualsmc instead of fakesmc) , I have only one issue.

When usb attached and laptop goes to sleep , system hangs (may be just the display , cause fans are running).

Can you check , please ?

without usb connected work good?

 

Yes. If there is no usb connected sleep works fine.

Posted

Hey,


I've attached my Send me file.


Having a few issues;


- Graphics - I'm having to run via CPU graphics as when I connect a GTX 710 the system crashes on boot. On the odd occasion it gets past 'attempting to recover.....' It causes the Wifi card to be disabled. Bit of a strange one. I have Cuda installed too. I can never get the graphics to be produced by the graphics card, I have to always have HMDI via the MB. As it stands the graphics card has been removed.


- No Audio output devices.


System:

ASRock Z97 Extreme 6

Intel i7 4790k

GTX 710


Thanks in advance.

Send me Laurens-iMac.zip

Posted

Hi,


I have an Intel G4400 CPU with HD510 (GT1) iGPU on an Asus H110i-PLUS D3 motherboard.

The system is stable but there are a few issues left that I would like to sort out. Any advice would be highly appreciated.


1) HD510 is recognized (with 7MB instead of 64 set in BIOS) but without QE/CI. I found a site where somebody claims "Just Inject device-id 0x1902 via FakeID/IntelGFX=0x19028086 (which is supported natively and correponds to HD510), and no need for FakePCIID at all." I edited the config.plist accordingly, but sill no QE/CI.


2) Audio is working, but not through HDMI


3) CPU is still reported as "unsupported". Not sure whether this is a real problem though.


Send me files are attached. Many thanks in advance.

Send me.zip

  • Administrators
Posted

Yes. If there is no usb connected sleep works fine.

 

u can try with debug.kext for check if u see what cause it


Added in 10 minutes 47 seconds:

Hey,


I've attached my Send me file.


Having a few issues;


- Graphics - I'm having to run via CPU graphics as when I connect a GTX 710 the system crashes on boot. On the odd occasion it gets past 'attempting to recover.....' It causes the Wifi card to be disabled. Bit of a strange one. I have Cuda installed too. I can never get the graphics to be produced by the graphics card, I have to always have HMDI via the MB. As it stands the graphics card has been removed.


- No Audio output devices.


System:

ASRock Z97 Extreme 6

Intel i7 4790k

GTX 710


Thanks in advance.

u need check if 710 work good in ur system, after high sierra have some problems with 710

DSDT.aml.zip

 

Added in 3 minutes 36 seconds:

Hi,


I have an Intel G4400 CPU with HD510 (GT1) iGPU on an Asus H110i-PLUS D3 motherboard.

The system is stable but there are a few issues left that I would like to sort out. Any advice would be highly appreciated.


1) HD510 is recognized (with 7MB instead of 64 set in BIOS) but without QE/CI. I found a site where somebody claims "Just Inject device-id 0x1902 via FakeID/IntelGFX=0x19028086 (which is supported natively and correponds to HD510), and no need for FakePCIID at all." I edited the config.plist accordingly, but sill no QE/CI.


2) Audio is working, but not through HDMI


3) CPU is still reported as "unsupported". Not sure whether this is a real problem though.


Send me files are attached. Many thanks in advance.

ur cpu don't have a native support, ur gpu i think don't work too, put one rx560DSDT.aml.zip

DSDT.aml.zip

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

  • Administrators
Posted

Hi, Could someone help me with the patch not my notebook ideaPad 320 i78550U, intel hd620? My trackPad dont work , and the intel h620 have only 7mb

DSDT.aml.zip

 

Video

IntelGFX 0x59168086, ig-platform-id 0x591b0000 and InjectIntel

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

Posted

Hi guys,

I installed High Sierra in the unishit + multishit way on my PC. It works even though there is no sound after my PC wakes up from sleep.

Now, I would like try the Olarila way, could you help patch my DSDT and SSDT? And it is very appreciated if you could tell why and how the changes should be made.

Thanks.

Send me Yanans-iMac.zip

  • Administrators
Posted

Hi guys,

I installed High Sierra in the unishit + multishit way on my PC. It works even though there is no sound after my PC wakes up from sleep.

Now, I would like try the Olarila way, could you help patch my DSDT and SSDT? And it is very appreciated if you could tell why and how the changes should be made.

Thanks.

DSDT.aml.zip

 

USE in config.plist


change GFX0 to IGPU

47465830

49475055


change EHC1 to EH01

45484331

45483031


change EHC2 to EH02

45484332

45483032


change HECI to IMEI

48454349

494d4549


change SAT0 to SATA

53415430

53415441

-Guides and Tutorials HERE

-Hackintosh Tutorial Database - HERE

-The largest EFI folder collection for Hackintosh HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-Professional Hackintosh Support since 2006 HERE

Posted

USE in config.plist


change GFX0 to IGPU

47465830

49475055


change EHC1 to EH01

45484331

45483031


change EHC2 to EH02

45484332

45483032


change HECI to IMEI

48454349

494d4549


change SAT0 to SATA

53415430

53415441

 

Thanks for your quick response, MaLd0n. I am using your DSDT patch now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...