DSDT patch requests

Q: What is a Hackintosh?

A non-Apple computer configured to run macOS using compatible PC hardware combined with a custom bootloader and configuration files to emulate a real Mac environment.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA). It is generally not illegal for personal experimentation but not permitted for commercial use.

Q: What hardware is best for a Hackintosh?

The best hardware closely matches real Apple systems, with Intel CPUs (6th Gen to Core Ultra), AMD Radeon GPUs, compatible chipsets, and Intel-based Wi-Fi cards offering higher success rates.

Q: Can I build a Hackintosh with an AMD CPU?

Yes, macOS can run on AMD Ryzen CPUs using kernel patches, but Intel CPUs provide better native compatibility.

Q: What is OpenCore?

OpenCore is a modern Hackintosh bootloader that provides near-native macOS behavior and is the recommended bootloader for new installations.

Q: Is Clover still supported?

Yes, Clover is still supported but less recommended compared to OpenCore for modern systems.

Q: Which macOS versions support Hackintosh?

Hackintosh systems support macOS versions from Leopard up to recent releases, depending on hardware compatibility.

Q: Do NVIDIA graphics cards work on Hackintosh?

Only older NVIDIA GPUs work on older macOS versions; modern NVIDIA GPUs are incompatible with current macOS releases due to lack of driver support.

Q: What is an EFI folder?

The EFI folder contains the bootloader, drivers, kexts, and configuration files required to boot macOS on a Hackintosh.

Q: What are kexts?

Kexts (kernel extensions) are drivers that enable hardware functionality such as audio, Ethernet, USB, and graphics.

MaLd0n · August 22, 2018

How to do that sir??

Im sorry, I don’t understand

is a persoanl config, u need read topic in IM about it

idris iqbal · August 22, 2018

is a persoanl config, u need read topic in IM about it

Can you give me reference sir??

MaLd0n · August 22, 2018

Can you give me reference sir??

start here

https://www.insanelymac.com/forum/topic/321021-guide-hwpintel-speed-shift-enable-with-full-power-management/?do=findComment&comment=2369259

idris iqbal · August 22, 2018

start here

https://www.insanelymac.com/forum/topic ... nt=2369259

Ok sir

Thank you so much

MaLd0n · August 22, 2018

Ok sir

Thank you so much

enjoy

andreimihai · August 22, 2018

Hi Mr. Maldon!!

I sent you the "The send-me file" and you sent me the "DSDT.aml" attached file. I copied it to EFi partition -> EFi -> CLOVER -> ACPI -> patched, but nothing changed. Do you have any idea on what can I do?

Thank you a lot for your time you spend by doing this!!

Send me Andreis-iMac.zip

DSDT.aml.zip

DROMGBA · August 22, 2018

bonjour Mr MaLd0n les retour pour la Gigabyte B250n- Phoenix wifi avec votre dsdt sa démarré plus donc j ai reinstaller

OSX 10.13.6 et un nouveau send_me pourrai vous m aide svp Mr MaLd0n

Send me imac-de-bernard.home.zip

MaLd0n · August 22, 2018

Hi Mr. Maldon!!

I sent you the "The send-me file" and you sent me the "DSDT.aml" attached file. I copied it to EFi partition -> EFi -> CLOVER -> ACPI -> patched, but nothing changed. Do you have any idea on what can I do?

Thank you a lot for your time you spend by doing this!!

Attachments

file is not load, check it

Added in 24 seconds:

bonjour Mr MaLd0n les retour pour la Gigabyte B250n- Phoenix wifi avec votre dsdt sa démarré plus donc j ai reinstaller

OSX 10.13.6 et un nouveau send_me pourrai vous m aide svp Mr MaLd0n

use only one topic to avoid confusion

andreimihai · August 22, 2018

file is not load, check it

Sorry for that. I have attached the file again in this reply. Hope it loads

Send me Andreis-iMac.zip

MaLd0n · August 22, 2018

Sorry for that. I have attached the file again in this reply. Hope it loads

what problems ur hack have?

andreimihai · August 22, 2018

what problems ur hack have?

Until now I noticed the following problems:

-If it gets in stand-by, I can't open it anymore

-If I try to shutdown it, it restarts

-The volume bar isn't working properly (it doesn't modify sound output; I can only mute it)

-If I try to send a screenshot on facebook messenger, it restarts

-I think it takes a little bit too much to boot

MaLd0n · August 22, 2018

use fresh install

many problems for a simple hardware

andreimihai · August 22, 2018

use fresh install

many problems for a simple hardware

Ok sir!

Thank you!

olrik1953 · August 22, 2018

olrik1953 wrote: ↑

Results of my test with your CLOVER : Always sound with HP but no sound from HDMI from HD630

send me new dump with new files

Here is my new dump (with a new login because i have made a new installation with a new login but it is for the same installation on a SSD)

Send me Achilles-iMac.zip

MaLd0n · August 22, 2018

Here is my new dump (with a new login because i have made a new installation with a new login but it is for the same installation on a SSD)

very wrong config, u can use a simple and clean solution

check folder with ur files

CLOVER.zip

genewang · August 23, 2018

i hope this is the Right Area Hello, please help

im having trouble booting up to after installing nvidia web driver high sierra 10.13.6

Asus Rampage IV Extreme board

7-4930K

nvida Gtx 10x

Gene

MaLd0n · August 23, 2018

i hope this is the Right Area Hello, please help

im having trouble booting up to after installing nvidia web driver high sierra 10.13.6

Asus Rampage IV Extreme board

7-4930K

nvida Gtx 10x

Gene

run our app and post files here, use nv_disable=1

RunMe.app

Hootpy · August 23, 2018

Hi, I have installed Hackintosh on my rig, everything seems okay now but the shutdown and restart do not work. And in the PCI tab doesn't show full of the pci device.Also the usb 3.0 seems not working either. would you mind checking if there is any problem with my config? Thanks in advanced!

Asus Rampage IV Black Edition

E5 - 1650v2

GTX 1080ti

Send me Phams-Mac-Pro.net.fpt.zip

MaLd0n · August 23, 2018

Hi, I have installed Hackintosh on my rig, everything seems okay now but the shutdown and restart do not work. And in the PCI tab doesn't show full of the pci device.Also the usb 3.0 seems not working either. would you mind checking if there is any problem with my config? Thanks in advanced!

Asus Rampage IV Black Edition

E5 - 1650v2

GTX 1080ti

DSDT.aml.zip

genericxhci kext = problems after el capitan

ekwipt · August 24, 2018

@MaLd0n what’s the reason for no overclock on X99 systems using iMAc PRo SMBIOS on 10.13.6?

Sign In

DSDT patch requests

Recommended Posts

MaLd0n

idris iqbal

MaLd0n

idris iqbal

MaLd0n

andreimihai

DROMGBA

MaLd0n

andreimihai

MaLd0n

andreimihai

MaLd0n

andreimihai

olrik1953

MaLd0n

genewang

MaLd0n

Hootpy

MaLd0n

ekwipt

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity