DSDT patch requests

[kalpesh]

Thanks it worked ... But gives me 5-10FPS like performance on Yosemite.

 

i've found that brightness goes to 0% , so i have to hold the power button.

[noumal]

@artur-pt

thanks , i will try it

[c0ke]

@c0ke

hello

try this one

 

[attachment=0]DSDT.aml.zip[/attachment]

 

u don't need now nullcpupowermanagement

hdef layout 1 for applehda

smbus

irqs

usb

function keys

rtc

pnlf

good hack

 

Thank you for your support!

I tried to boot with your dsdt.aml in Extra and removing NullCPUPM, but the boot process hangs at "NVDAStartup: Official".

Using Chameleon 2.2 svn r2391...

I suspect it is not a NVDA issue. Any idea?

[artur-pt]

hello

must be a nvidia issue

that is a nvidia kext

good hack

[c0ke]

hello

must be a nvidia issue

that is a nvidia kext

good hack

 

Mmmh.. ok, I did't think NullCPUPowerManagement presence could impact on NVIDIA kexts... Since with that kext the card is working and recognized.

[Roxio2010]

@DHi10

Sorry for my bad English!

This is only a temporary solution for ipibl-la;

With auto-patcher generate a DSDT for ipibl-lb;

It works for my ipibl-la too except for ethernet & wifi.

Good luck.

[c0ke]

hello

must be a nvidia issue

that is a nvidia kext

good hack

 

Hello

A short update..

After reading the post install guide post, I patched AICPUPM this way apparently with no success..

Anyway then I've been able to boot twice to maverick's desktop, after a verbose boot with a fsck_hfs (automatically started... ) but after maybe a minute, just the time to open the extension list, I've got KP:

 

No HPETs available...CPU(s) configured incorrectly

 

and then never more, the boot process hangs always where in verbose level I got NVDAStartup: Official.

However booting without flags after quite a minute of spinning wheel I've got again No HPETs available KP...

[artur-pt]

hello

u read all wrong ..

where u see to patch appleintelcpupowermanagement.kext ? u have a c2d

not a sandy, ivy, or haswell

u only set p-states and c-states=yes

read again .. but read carefully

good hack

[pernacabeluda]

No HPETs available...CPU(s) configured incorrectly

Try to change in device HPET

                    Method (_STA, 0, NotSerialized)
                   {
                       Return (0x0F)
                   }

[c0ke]

Try to change in device HPET

                    Method (_STA, 0, NotSerialized)
                   {
                       Return (0x0F)
                   }

Hi, thank you for your code!

The problem is I'm trying to boot without NullCPUPowerManagement with the dsdt.aml file provided by artur-pt a few posts ago, but the boot process hangs with no KP.

There I have:

 

Method (_STA, 0, NotSerialized)
                   {
                       If (LGreaterEqual (OSID (), 0x10))
                       {
                           Return (0x0F)
                       }

                       Return (Zero)
                   }

That looks something similar.

@artur-pt

Right, in fact the original aicpupm was sent back in S/L/E.

and p-states and c-states are been set to Yes in my boot.plist long time ago...

 

<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>

 

I don't know what else I should carefully read now...

[artur-pt]

Try to change in device HPET

                    Method (_STA, 0, NotSerialized)
                   {
                       Return (0x0F)
                   }

 

hello

with perna suggest

anyway don't need to patch the kext

 

DSDT.aml.zip

 

good hack

[c0ke]

Hello guys!

thank you once again for your support, unfortunately, with this second dsdt file also, I cannot past the message

NVDAStartup: Official

 

at boot, unless NullCpuPM is loaded.

I didn't find any track on the internet about injecting the device id of my GPU card into the Nvidia kexts on mavericks.. as described here viewtopic.php?f=18&t=154

do you think it is needed for my card in order to solve this issue?

[artur-pt]

hello

make a copy of the kext .. then remove it

boot

-f

and see what happen

in the guide u post and follow .. it remove all nvidia kext to boot

then use ones from a dp..

goos hack

[c0ke]

That's strange... it didn't work.

Tried removing all NVDA kexts and boot with -f -v, but it hangs at

No interval found for . Using 80000

(maybe related to appleps2, not really an issue since I remember that on my inspiron too..)

Same thing using NVDA kexts from dp.

Now it's always hanging at that point. Just a couple of lines behind "NVDAStartup: Official". And with the original NVDA kexts back in their place too.

And if i remove dsdt.aml from /Extra... Same thing, same point.

If I add NullCPUPM to S/L/E it boots to desktop.

I'll try a fresh install and see what happens.

Thank you anyway guys, I'll report if I'll made some progress..

[nml]

hello, artur-pt and all.

Recently I build a new pc with 9 series mobo. my cpu's graphics used to work fine on z87 but no QE\CI on Z97.

I had tried to inject ig-platform-id on clover but no working.

Since the experience that my hd 4600 was drived only with dsdt inject on 8 series, I realized that it maybe need to fix my new mobo's dsdt and inject graphics' code.

Thank you so much if you could solve the problem.

Here are my build:

OS: mavericks 10.9.4

boot: clover

send_me.zip

[artur-pt]

@nml

hello

there u have tables without errors

none patch applied

series 9 is all new .. i don't have none to test .. no mac with that chipset .. so .. the patch don't exist

 

Clean DSDT.zip

 

good hack

[nml]

@nml

hello

there u have tables without errors

none patch applied

series 9 is all new .. i don't have none to test .. no mac with that chipset .. so .. the patch don't exist

 

[attachment=0]Clean DSDT.zip[/attachment]

 

good hack

 

Thank you so much.

BTW, the files you uploaded are two .aml.

Is that OK to dessamble them to .dsl and patch with graphics id just like 8 series?

[artur-pt]

hello

u can try to patch and test.. the graphics are in ssdt-4..aml

good hack

[laigino]

Hi everyone,

If possible, i need DSDT form my lenovo Z580

I5-3210m 2.5Ghz -3.1 turbo boost

4GB Ram

Intel HD 4000

ge force gt-635m

Chipset HM76

Thank you very much

[artur-pt]

hello

u should read from the first post .. what u ask no sense..

good hack

[miroctas]

Hello my pc Packard Bell TE11-HC-700TK

Pc does not sleep and the display brightness is not set. We also want to disable Nvidia Optimus.

Thank you very much.

dsdt.zip

[artur-pt]

hello

try this

http://Olarila.com/forum/viewtopic.php?f=31&t=4710&p=42512&hilit=%3Aforum+disable+nvidia#p42512

good hack

[pernacabeluda]

You need to copy method _OFF (and required objects) from SSDT to DSDT

 

DSDT.aml.zip

[tomqsher]

Ive attached sendmefile.zip, i would like to get battery status, bluetooth, disable nvidia. Thanks in advance

Send me Rustom’s MacBook Air.zip

[artur-pt]

hello

should have native usb ( no need extra kext) only system kext

sata

smbus

brightness fix

bat ????

nvidia u should read about the issue.. also bluetooth

audio layout id 1

graphics 0x01660003

 

DSDT.aml.zip

 

good hack