DSDT patch requests

[ruorbe]

@ruorbe

hello

u are joking right ?

only that.. u don't want a mac book pro retina ?

there it is

 

[attachment=0]DSDT.aml.zip[/attachment]

 

read carefully and apply

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=3111

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

http://Olarila.com/forum/viewtopic.php?f=28&t=3198

http://Olarila.com/forum/viewtopic.php?f=9&t=1933

u smbios is wrong is for a sandy bridge system not u case.. use macbookpro9,1

HDEF layout (0C) 12 for audio..

good hack

 

Hi Arthur,

Everything is up and running except for the Nullpowermanagement, should I patch the AICPM as in sandybridge processors first?

Thanks again

[thm]

Hi, i'm new here with this problem:

If I send my "P8Z77-v pro" to sleep,

then immediately followed by a "wake up".

Except USB keyboard and USB mouse caught no

external USB device to the computer.

However, I have intern a HUB (USB2.0 + Card Reader)

and a HUB (USB3.0)... and the Corsair H80i Cooler

The log file says:

24.05.13 13:56:05,000 kernel[0]: hibernate_write_image done(0)

24.05.13 13:56:05,000 kernel[0]: sleep

24.05.13 13:56:05,000 kernel[0]: Wake reason: EHC2 PXSX PXSX

or:

24.05.13 11:55:53 MESZ WakeRequests Clients requested wake events: None

24.05.13 11:56:28 MESZ Wake Wake due to EHC2 PXSX PXSX/: Using AC

24.05.13 12:00:59 MESZ Assertions Summary- Aggregate:0x40 Using AC

Sleepenabler.kext is running. (must run!)

In my dsdt.aml, i have removed the Methode '_PRW' in Block EHC2

but the problem remains.

Best regards Thm.

Send me MacPc.zip

[artur-pt]

 

are u using ssdt ? (is a script to generate it , pikes)

dropssdt=yes

p and c-states=no

if so..

patch also the kext...

good hack

[artur-pt]

@thm

there it is

 

DSDT.aml.zip

 

try it

good hack

[thm]

Hi and thanks,

 

@thm

there it is

try it

 

The EHC2 problem is solved, the computer wakes up because

'PXSX'

Here is the log output:

25.05.13 17:51:34,000 kernel[0]: hibernate_write_image done(0)

25.05.13 17:51:34,000 kernel[0]: sleep

25.05.13 17:51:34,000 kernel[0]: Wake reason: PXSX PXSX

25.05.13 17:51:18 MESZ Sleep Software Sleep Sleep: Using AC 35 secs

25.05.13 17:51:18 MESZ Assertions PID 71(apsd) Released ApplePushServiceTask "com.apple.apsd-waitingformessages-push.apple.com" 00:00:22 id:0xc0000xxxx Aggregate:0x1040

25.05.13 17:51:18 MESZ WakeRequests Clients requested wake events: None

25.05.13 17:51:53 MESZ Wake Wake due to PXSX PXSX/: Using AC

25.05.13 17:52:01 MESZ Assertions PID 71(apsd) Created ApplePushServiceTask "com.apple.apsd-waitingformessages-push.apple.com" 00:00:07 id:0xc0000xxxx Aggregate:0x1040

Is there any idea?

Thanks again for the effort!

Best regards Thm.

[ruorbe]

are u using ssdt ? (is a script to generate it , pikes)

dropssdt=yes

p and c-states=no

if so..

patch also the kext...

good hack

 

Hi,

I've done it but when delete nullpowermanagement, it gets into the OS and in less than a minute it freezes.

What can it be the cause?

[artur-pt]

hello

boot

-v

and post photo of the kp related....

or use darwindumper

and post a full dump..

have u patch the appleintelcpupowermanagement ?

good hack

[ruorbe]

hello

boot

-v

and post photo of the kp related....

or use darwindumper

and post a full dump..

have u patch the appleintelcpupowermanagement ?

good hack

 

Yes I did it,

Thats the report, I cannot see KP boots fine into the system and then in a while freezes.

DarwinDump.htm.zip

[eugene2878]

hello

there it is

 

LegacyATI4800Controller.kext.zip

[artur-pt]

@thm

hello

no idea for now...

try to see in bios something related with that...

good hack

[artur-pt]

@ruorbe

errors

HPET: map device registers failed

SATA WARNING: Enable auto-activate failed.

ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a

-- power management may be incomplete or unsupported

first 2 see in bios something is wrong

remove voodoobattery and install original appleacpiplatform... from 10.8.3...

good hack

[artur-pt]

@eugene2878

i don't see anything wrong with i send u before..

anyway new without patches and no error

apply u what u want...

 

DSDT.aml.zip

 

good hack

[thm]

Hi Artur,

 

@thm

no idea for now...

try to see in bios something related with that...

With the new dsdt following a restart after shutdown!

I need to turn off the power button press 4 seconds,

once the bios reports.

Best regards Thm.

[artur-pt]

Hi Artur,

With the new dsdt following a restart after shutdown!

I need to turn off the power button press 4 seconds,

once the bios reports.

Best regards Thm.

 

hello

new dsdt only patched

 

DSDT.aml.zip

 

DTGP

EHCI

HDEF layout (0C) 12 for applehda

good hack

[thm]

Hi Artur,

Thank you for your trouble, but see below ...

new dsdt only patched

DTGP

EHCI

HDEF layout (0C) 12 for applehda

Shutdown now works again

but:

26.05.13 14:35:16,000 kernel[0]: Standby delay is not specified! Defaulting to 0x1068
26.05.13 14:35:16,000 kernel[0]: ErP Timer is not specified! Defaulting to 0x3840
26.05.13 14:35:16,000 kernel[0]: Standby delay is not specified! Defaulting to 0x1068
26.05.13 14:35:16,000 kernel[0]: ErP Timer is not specified! Defaulting to 0x3840
26.05.13 14:35:16,000 kernel[0]: Standby delay is not specified! Defaulting to 0x1068
... more lines...

and:

26.05.13 14:35:16,000 kernel[0]: USBF:	111.842	AppleUSBEHCI[0xffffff803b6aa000]::Found a transaction which hasn't moved in 5 seconds on bus 0x1a, timing out! (Addr: 0, EP: 0)
26.05.13 14:35:20,000 kernel[0]: [0xffffff8046e98e00](1)/(5) Device not responding
26.05.13 14:35:23,000 kernel[0]: USBF:	117.846	AppleUSBEHCI[0xffffff803b6aa000]::Found a transaction which hasn't moved in 5 seconds on bus 0x1a, timing out! (Addr: 0, EP: 0)
26.05.13 14:35:25,000 kernel[0]: USBMSC Identifier (non-unique): 000010005269B9000196 0x1370 0x321 0x2

In bios I have tried a lot:

C3 'Auto' / 'Enabled'

C6 'Auto' / 'Enabled'

C-State 'Auto' / 'Enabled'

USB 3.0 'Enabled' / 'Disabled'

Antiquated USB 'Auto' / 'Enabled'

XHCI 'Smart Auto' / 'Auto' / 'Enabled'

Unfortunately no change brought a success.

After sleep following wake up ..

Best regards Thm

[thm]

Hi Artur,

I finally have a "solution" found.

In the BIOS:

Asmedia USB 3.0 controller (rear) -> Disabled

Asmedia USB 3.0 controller (front) -> Disabled

Sleep now works

Although "power-on" only works on the power switch,

but that is no problem

Nevertheless please note my last posting.

Best regards Thm.

[artur-pt]

hello

try the usb3 with this kext

http://sourceforge.net/projects/genericusbxhci/files/Archive/

remove the old one and install this one...

good hack

[eugene2878]

@eugene2878

i don't see anything wrong with i send u before..

anyway new without patches and no error

apply u what u want...

 

[attachment=0]DSDT.aml.zip[/attachment]

 

good hack

 

Hi. Thank you for your work. However my fans still spins as usual in full power. What should I do next to make my fans spin slower?

[D-an-W]

Folks, does anyone have the time & talent to patch me a DSDT for my system to be used with Cover?

I have been trying for two days now with not much luck to get HDMI audio and the onboard audio ports to work at the same time as well as apply other relevant patches to optimise the hardware such as the onboard LAN.

Motherboard: Gigabyte GA-Z77X-UD5H (Rev. 1.1 BIOS v14)

CPU: Intel i7-2600K (HD3000)

I don't have a discreet GPU installed currently either.

With my older hardware MaLd0n did one and it worked a treat so hopefully there is hope for me yet!

Edited May 26, 2013 by Guest

[artur-pt]

hello

u dsdt is already patched by mrengles

ask him..

good hack