DSDT patch requests

[figarotheall]

Hi, I have Mountain Lion 10.8.2, can you edit DSDT in order to enable hardware acceleration for my Sapphire HD 6950 2GB?

Without DSDT (with oleg_tr kext and FBRotate) I have gray screen without cursor (probably doesn't recognize the graphics card)...

System specific:

-Asus Rampage II Extreme (x58)

-i7 920 3,8gHz

-6GB RAM 1600MHZ

-Sapphire HD 6950 2GB

thanks a lot!

P.S If possible, Can you try to operate my Wifi USB (Netgear WNA 1100)?

 

Some help? thanks!

[artur-pt]

hello

what u want to apply to the 6950 ?

u job is to find the rights patch to the card...

then post it and someone, try to apply to the dsdt.. if that patch make any sense...

or u hope we find the right patch for u card.. ? none of us have that card.. so we can not test...

good hack

[figarotheall]

hello

what u want to apply to the 6950 ?

u job is to find the rights patch to the card...

then post it and someone, try to apply to the dsdt.. if that patch make any sense...

or u hope we find the right patch for u card.. ? none of us have that card.. so we can not test...

good hack

 

I wanted edit DSDT in order to operate my HD6950 on ML 10.8.2, but I do not know how to do.

However thanks!

[afrojewelz]

I AM USING GLADIA NAS N70E-DR itx motherboard ivybridge celeron @H77M chipset only VGA output dual gigabit ethernet ,no audio codec,here is dsdt unpatched,will anyone would like to help me patch it?

[cleophus]

I am looking for a patched DSDT for my system.

Motherboard: MSI H61M-E33/W8

BIOS 18.3, patched with PMPatch

Processor: Core i5-2500K

OS 10.8.2

I need ALC887, HDMI audio, and sleep edits. The system will go to sleep and immediately wake to a gray screen with spinning indicator.

Thanks!

Send me .zip

[mgaffar]

Hey arthur-pt, when i used your dsdt my system would not boot. So i took the _DSM section from under GFX0 from the dsdt you created and added it to my old dsdt that worked fine before i upgraded the lcd. Doing that allowed my system to boot with a 1600x900 resolution, but i lost hd4000 acceleration. Before i upgraded i was using the "device-properties" flag in chameleon and had the 01 66 00 03 id hex string. When using the _dsm section i put it as 0x03, and i deleted the string from the .boot.plist, but im still unable to get acceleration. Is it possible that i would have to use a different id? i have tried 01, 02, 03, 04 without any changes.

Btw, i dont know if this would make a difference but i forgot to mention my system has a hd4000 and a nvidia gt650m 2gb. Also is there any way to disable it so it wont consume power. I cant do it in bios

Any ideas?

Thanks,

Mo

[artur-pt]

@cleophus

hello

try this one

 

DSDT.aml.zip

 

see and apply

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=2193

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

http://Olarila.com/forum/viewtopic.php?f=9&t=1933

good hack

[huutrung]

Hi ^^

Attached is my send_me.zip from my desktop...

Appreciate any help on making my graphic card ATI HD3600 working...

Thanx in advance...

Send me maiphuong’s Mac Pro.zip

[cleophus]

@cleophus

hello

try this one

 

[attachment=0]DSDT.aml.zip[/attachment]

 

see and apply

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=2193

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

http://Olarila.com/forum/viewtopic.php?f=9&t=1933

good hack

 

I am confused on the AppleHDA mod. Looking at the DSDT you sent me it has audio-id 0x0C, 0x00, 0x00, 0x00 and device-type "ALC897". I have ALC887 and the post mentions I need audio-id 1 or 2. Can I just make those changes with current DSDT?

I tested wake from sleep on Chimera and Clover. Under Chimera, the system stayed asleep but rebooted on wake. Under Clover, the system and motherboard crashed and required a full BIOS reset before I could boot.

The system now wakes to the desktop, but desktop animations like clicking menus or moving mouse pointer are slow and stutter. There is no longer any difference between DSDT and non-DSDT behavior with Chimera. Under Clover, system crashes on wake with backtraces through com.apple.iokit.IOHIDFamily,IOUSBFamily,AppleUSBComposite,IOUSBHIDDriver

[artur-pt]

hello

about the audio id u can change it.. in the right section (HDEF)

about the loaders.. read all about how to config it...

must loaded by one or other.. better with clover..

and see u sets about usb...

good hack

[mgaffar]

Hey arthur-pt, thanks for the dsdt edit. I basically re did my entire dsdt by using all the ivy bridge patches, i believe the dsdt patch i was using for my motherboard was made sometime in 2011. After i did that and copied your _dsm section that you edited for duallink and device injection, i was able to boot into osx, but without acceleration.

I deleted the injection portion under _dsm and did a device properties hex string into chameleon.boot.plist. I tried the one that originally worked for me (0x03) but that wouldnt work. I eventually found one that worked, 0x04, but it dropped from 512mb to 384mb. I am fine with that as i have full acceleration and scored a 12298 on geekbench. If there is a way to get it back to 512mb please let me know.

Thanks,

Mo

[soiamtold]

Hello, I'm in need of a DSDT patch for system to enable the built in ethernet and audio and also enable sleep. Here are the specifics:

Asus M5A97 r 2.0

AMD 970 chipset

3.3 ghz

AMD FX 6100

Snow Leopard 10.6.3

Thanks in advance

Send me Steven Mac.zip

[milar26]

Here...

Thankyou.

Send me .zip

[Mirone]

Hello, I'm in need of a DSDT patch for system to enable the built in ethernet and audio and also enable sleep. Here are the specifics:

Asus M5A97 r 2.0

AMD 970 chipset

3.3 ghz

AMD FX 6100

Snow Leopard 10.6.3

Thanks in advance

Lan: http://www.osx86.net/downloads.php?do=file&id=3048

Audio: http://Olarila.com/forum/viewtopic.php?f=9&t=897 (Try This)

Your DSDT.aml fixed:DSDT.aml.zip

[Mirone]

Here...

Thankyou.

Try this:DSDT.aml.zip

[bluetown]

hey all! does someone by chance have a dsdt file for a ZOTAC GeForce 9300-ITX [GF9300-D-E] motherboard? i have scoured the net looking for it to no avail... Would be much much appreciated!

thanks!

[pernacabeluda]

hey all! does someone by chance have a dsdt file for a ZOTAC GeForce 9300-ITX [GF9300-D-E] motherboard? i have scoured the net looking for it to no avail... Would be much much appreciated!

thanks!

Read the first post.

[lovelamp4all]

Kindly help me solve my Intel graphics HD 4000 by patching my dsdt for me

Send me Misbah’s MacBook Air.zip

DSDT.rar

[Mirone]

Kindly help me solve my Intel graphics HD 4000 by patching my dsdt for me

try this: DSDT.aml.zip

P.S: Warnings are irrelevant.

[soiamtold]

Lan: http://www.osx86.net/downloads.php?do=file&id=3048

Audio: http://Olarila.com/forum/viewtopic.php?f=9&t=897 (Try This)

Your DSDT.aml fixed:[attachment=0]DSDT.aml.zip[/attachment]

 

Thank you, but still can't connect to the internet as it doesn't recognize my built in ethernet. Other ideas?

[yariminal]

Hey there,

I am new to this site:)

I managed to run iatkos l2 10.7.2 on my Acer Aspire 5810t

specs are:

1.4 Ghz intel core 2 solo

4gb ram

Ati Radeon HD 4330m 512mb QE CL enabled (using 4330 ati kext and Aty_init added aticonfig and atiports to boot.plist)

1.3 camera working with anyisight kext

sound works with voodooHDA (changed gain to 0 to disable white noise)

shutdown\restart works

wifi changed to Atheros (replacing intel 5100 ANG)

Trackpad works with 2 fingers gestures

boot flags: USBBusfix=yes arch=i386

not working:

sleep (tried sleepenabler)

cpu is on 65± degrees (on Windows 8 its 53±)

in order to enable this 2 I want to try DSDT can you help me?

thanks

dsdt.aml.zip

[artur-pt]

@yariminal

hello

there it is

HDEF layout 12 (0C) for applehda...

if gonna use voodoohda , remove applehda

remove nullcpupowermanagement

set in chameleon

p and c-states=Yes

 

DSDT.aml.zip

 

good hack

[yariminal]

@yariminal

hello

there it is

HDEF layout 12 (0C) for applehda...

if gonna use voodoohda , remove applehda

remove nullcpupowermanagement

set in chameleon

p and c-states=Yes

 

[attachment=0]DSDT.aml.zip[/attachment]

 

good hack

 

hey! thank u very much it is working now recognizing all sensors sleep is working!, but after deleting nullcpupowermanagement

I see only 3 sensors of temp in iStats (before I had 5) the temp is moving around 65-... any idea?

and again tnx!

[artur-pt]

hello

have u set in chameleon...

generate c and p - states =yes

about the sensors must be from fakesmc and plugins....

for the cpu / hd / graphics...

i don't know what are u saying about 5 ?

good hack

[yariminal]

hello

have u set in chameleon...

generate c and p - states =yes

about the sensors must be from fakesmc and plugins....

for the cpu / hd / graphics...

i don't know what are u saying about 5 ?

good hack

 

Hey,

I set the generetecstates=yes and generatepstates=yes,

when I booted with nullpower... I saw on istat 5 different sensors (I didn't wrote their name or something :[)

after deleting it I see only 3 ("cpu die 1" "heatsink" "motherboard")

except for this everything is good.