Olarila Big Sur Beta 6 Vanilla Image / USB Installation

[eddie1681]

On 8/17/2020 at 7:24 PM, MaLd0n said:

what ur hardware?

I have the following 

• CPU
  Core I5 8500K
• Motherboard
  GIGBYTE Z370DM DS3H
• GPU
  RX 580

   

  Ram 32MB
  
  Bluetooth - Fenvi - T919

  
  That is all I have 

   

  Thanks
  
   

[MaLd0n]

6 minutes ago, eddie1681 said:

I have the following 

post one dump

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

[mandstef]

Hi, ca someone please help me with the bellow error?

32:566 00:035 AAPL: [EB|#LOG:EXITBS:START] 2020-08-19T15:07:39

I try to install Big Sur with OpenCore 0.6.0 for several days but with out luck.

I follow the Dortania guide and also try the troubleshooting section related to this issue but didn't work, same problem

My specs are:

Cpu: I5-3570K

Mb: Asus P8-Z68-v/gen3

Gpu: MSI RX580 8G OCArmour

I'm attaching also my Efi folder and the entire Opencore error log.

Thank you

EFI.zip opencore-2020-08-19-150705.txt.zip

[MaLd0n]

29 minutes ago, mandstef said:

Hi, ca someone please help me with the bellow error?

u check in oc sanity checker?

[mandstef]

23 minutes ago, MaLd0n said:

u check in oc sanity checker?

Yes, is looks ok https://opencore.slowgeek.com/?file=ivybridge060R2dvze&rs=ivybridge060

 

[eddie1681]

11 hours ago, MaLd0n said:

post one dump

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

Thank you , here is my run me file 

Send me Eddies-iMac.lan.zip

[tahuru]

Hi, doesnt seem to work with my z170x ud5 th using HD530 with the precompiled EFI for 100,200,300. Tried the latest 0.6.1

https://opencore.slowgeek.com/?file=skylake060XEPKSM&rs=skylake060

Edited August 20, 2020 by tahuru

[Israel Serrano]

Funcionooo!!!  MUY Bien?

[mandstef]

Hi, i'm trying to install Big Sur, but during the installation, when there are around 12-13 remaining remaining it crash and reboot.

It is possible to generate the installation log on the disk where i'm trying to install big sur?

 

[MaLd0n]

12 hours ago, eddie1681 said:

Thank you , here is my run me file 

DSDT.aml.zip

10 hours ago, tahuru said:

Hi, doesnt seem to work with my z170x ud5 th using HD530 with the precompiled EFI for 100,200,300. Tried the latest 0.6.1

https://www.olarila.com/topic/8918-opencore-vanilla-guide-step-by-step-full-dsdt-patched-or-ssdt/

57 minutes ago, mandstef said:

Hi, i'm trying to install Big Sur, but during the installation, when there are around 12-13 remaining remaining it crash and reboot.

post one video with this problem

[eddie1681]

8 hours ago, MaLd0n said:

DSDT.aml.zip 31.17 kB · 1 download

https://www.olarila.com/topic/8918-opencore-vanilla-guide-step-by-step-full-dsdt-patched-or-ssdt/

post one video with this problem

Thank you so much,   Do I just put it in the EFI/OC/ACPI folder?  

[MaLd0n]

22 minutes ago, eddie1681 said:

Thank you so much,   Do I just put it in the EFI/OC/ACPI folder?  

yes and add entry in ur config.plist

[eddie1681]

7 minutes ago, MaLd0n said:

yes and add entry in ur config.plist

How do I add entry to config.plist?  No wonder it didn't work for me.  I am so sorry I am very new to all this 

Thanks

 

[MaLd0n]

1 hour ago, eddie1681 said:

How do I add entry to config.plist?  No wonder it didn't work for me.  I am so sorry I am very new to all this 

https://www.olarila.com/topic/8918-opencore-vanilla-guide-step-by-step-full-dsdt-patched-or-ssdt/

[Synaesthesia]

Hello @Mald0n, I've tried with Beta 1,2,3,4 and 5. Installer of Big Sur always crashes at a certain point, when trying to install from USB. Obviously using latest OC 0.6.1 and latest kexts, maybe you could advise me? I am able to install with the restore method or VMWare method, and then boot up, but cannot finish native installation from USB.

Thank you friend, Paul from South Africa.

I can upload my EFI folder if need be. My specs are Asus Z97k, i5-4460, RX560 4gb graphics, 1tb Intel 660p NVME. Runs Catalina and older perfectly.

[Harry Razor]

Hello @MaLd0n

I need help with Big Sur installer. It cant see my internal hdd for me to install. I have put my hardware patched DSDT that you give for DSDT post request.

What can I do to make my internal hdd can be seen by Big Sur installer?

Thanks.

[alexandoer]

hello together, once again. every beta since the first dp installed just fine, but since beta 5 I can't get it to install properly. after the first setup step (which works absolutely flawless) I can't get into the setup after the first reboot. no matter what I do. my oc config is definitely okay. but feel free to have a look at it. im out of ideas. any of you had the same problems with the setup?

my hardware:

intel core i7 7820x

msi x299 ack gaming mb

32 gb corsair ddr4 ram

radeon vii

im on open core 0.6.1

my config:

EFI.zip

[lclerte]

hello ! I read 

-Premade EFI USB Installer Series 100/200/300/400--

* You need change Booter Quirks if this folder don't work in your case*

So , How can I change Oquirks plist ..; I mean how to do a fresh install on my desktop with kabylake  i5/7400 ?  Any idea ??

many thanks , I will try every recommendations....

[tasco11]

18 hours ago, Synaesthesia said:

Hello @Mald0n, I've tried with Beta 1,2,3,4 and 5. Installer of Big Sur always crashes at a certain point, when trying to install from USB. Obviously using latest OC 0.6.1 and latest kexts, maybe you could advise me? I am able to install with the restore method or VMWare method, and then boot up, but cannot finish native installation from USB.

Thank you friend, Paul from South Africa.

I can upload my EFI folder if need be. My specs are Asus Z97k, i5-4460, RX560 4gb graphics, 1tb Intel 660p NVME. Runs Catalina and older perfectly.

Use verbose to see where did it stuck

4 hours ago, lclerte said:

hello ! I read 

-Premade EFI USB Installer Series 100/200/300/400--

* You need change Booter Quirks if this folder don't work in your case*

So , How can I change Oquirks plist ..; I mean how to do a fresh install on my desktop with kabylake  i5/7400 ?  Any idea ??

many thanks , I will try every recommendations....

OC or Clover? If you use OC then you should follow dortania guide and determine best setting for your machine

On 8/20/2020 at 2:04 AM, mandstef said:

Hi, ca someone please help me with the bellow error?

32:566 00:035 AAPL: [EB|#LOG:EXITBS:START] 2020-08-19T15:07:39

I try to install Big Sur with OpenCore 0.6.0 for several days but with out luck.

I follow the Dortania guide and also try the troubleshooting section related to this issue but didn't work, same problem

My specs are:

Cpu: I5-3570K

Mb: Asus P8-Z68-v/gen3

Gpu: MSI RX580 8G OCArmour

I'm attaching also my Efi folder and the entire Opencore error log.

Thank you

EFI.zip 2.66 MB · 0 downloads opencore-2020-08-19-150705.txt.zip 10.17 kB · 0 downloads

Set 'Rebuild Apple Map' in Booter Quirks to 'No'

[Synaesthesia]

Quote

Use verbose to see where did it stuck

Yeah what happens is the installer crashes before finishing then booting from the created install partition will almost boot up then crash, with a brief message which flashes on the screen momentarily, I will try to capture it.

Something to do with SMC is all I can tell.

I've tried various things, using Fakesmc kext, trying different boot arguments. But I think a lot of people have this issue currently. 

Edited August 22, 2020 by Synaesthesia