The Real Vanilla Hackintosh with macOS BigSur / Monterey and Opencore / Full DSDT Patches / Minimal third party kexts

[khalidthami]

2 hours ago, khalidthami said:

the sound works well with my old DSDT.aml + SSDT-ALC294.aml+CodecCommander.kext

the sound now works well thank you very much mister Maldon

Edited July 4, 2020 by khalidthami

[xrimarx]

12 hours ago, MaLd0n said:

send me

Thanks!!

Here it is. Maybe a PCI conflict with the AirPort PCIe wifi/bt card ?? Don´t know why it picks "AirPort" as slot for graphics cards.

There´s a device with name OLA1 (Intel Corporation, Series Chipset Gaussian Mixture Model) and i think it´s not being used. From what i can find appears to be related to the UHD 630, but maybe in headless mode it´s not used. 

 

Edited July 5, 2020 by xrimarx
delete sendme

[MaLd0n]

5 hours ago, khalidthami said:

the sound now works well thank you very much mister Maldon

Enjoy!

2 hours ago, xrimarx said:

Here it is. Maybe a PCI conflict with the AirPort PCIe wifi/bt card ?? Don´t know why it picks "AirPort" as slot for graphics cards.

the config looks good, just need a little and tired things

u just need pay attention in some oem ssdts. have some _dsm there too, etc  

[xrimarx]

28 minutes ago, MaLd0n said:

the config looks good, just need a little and tired things

u just need pay attention in some oem ssdts. have some _dsm there too, etc  

I can see in SSDT-4 there´s a _dsm "Device Labeling Interface", but don´t know what to do. It´s in Scope (\_SB.PCI0.PEG0). Do I need to touch this one?

Or do i need to add a _dsm with slot info in Scope (\_SB.PCI0.PEG0.PEGP) in same SSDT-4?

It´s not clear to me where the "AirPort" name comes from or what part of code is assigning that name.

Same thing to GFX0, in SSDT-3, I don´t see anything related to slot naming. 

[MaLd0n]

10 minutes ago, xrimarx said:

It´s not clear to me where the "AirPort" name comes from or what part of code is assigning that name.

remove Name (_SUN,... this is a conflict in ur case  

[xrimarx]

10 hours ago, MaLd0n said:

remove Name (_SUN,... this is a conflict in ur case  

 

BINGO!! Plus a lot of restarts until proper code is in the right place!!

 

Ok, so that´s what worked for me (GB Z390 Gaming X,f10c + i7-8700 + Pulse RX 580 8GB) in Mojave and Catalina with Opencore 0.5.9:

- remove NAME (_SUN,...) from GFX0 and PEGP in dsdt.aml

- add _DSM to PEGP for RX 580 (or inject proper device properties in congif.plist):

              Device (PEGP)
                {
                    Name (_ADR, Zero)  // _ADR: Address
                    Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                    {
                        Local0 = Package (0x02)
                            {
                                "AAPL,slot-name", 
                                Buffer (0x07)
                                {
                                    "Slot-1"
                                }
                            }
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                } 

- add slot info to IGPU Device Properties in config.plist ( _DSM code in GFX0 results in Kernel Panic, maybe is not the proper code or conflict with basic kexts...):

    <key>DeviceProperties</key>
    <dict>
        <key>Add</key>
        <dict>
            <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>AwCSPg==</data>
                <key>device-id</key>
                <data>kj4AAA==</data>
                <key>AAPL,slot-name</key>
                <string>Internal</string>
            </dict>
        </dict>
        <key>Delete</key>
        <dict/>
    </dict>

This later idea is from reading user PlexiPuter comments in the Opencore bootloader thread, so thanks!

So.... DONE !! ... for now

Big, big thanks to you MaLd0n !!  ???

 

Edited July 5, 2020 by xrimarx
edit

[MaLd0n]

Just enjoy, xrimarx xD 

[El Patas]

Gibabyte GA-Z8TX-UD3H
intel core i7 4770
Impossible for me to boot big sur ...
I get something
IOUSBHOST HIDDevice
IOUSBHOST interface
In another configuration I tried I got a text

"energy preferences"

and it keeps charging to infinity

Thanks in advance for your help  MaLd0n 

Edited July 6, 2020 by El Patas

[MaLd0n]

44 minutes ago, El Patas said:

Thanks in advance for your help  MaLd0n 

sound like a usb problem, in ur case u need kill 2 devices ehci, use only xhci

[El Patas]

Hace 47 minutos, MaLd0n dijo:

suena como un problema usb, en su caso necesita matar 2 dispositivos ehci, utilice sólo xhci

I move in the BIOS settings and I keep getting that ...

 

 

 

 

 

P_20200706_001159.jpg.zip

[Joseph Pressinger]

I keep getting a kernel panic on the OpenCore usb install for big sur. yet I can boot from clover on an external hdd the restore image you previously posted. I was just trying to install internally but it wont let me

 

 

[MaLd0n]

@El Patas inject device ec

 

4 hours ago, Joseph Pressinger said:

I keep getting a kernel panic on the OpenCore usb install for big sur. yet I can boot from clover on an external hdd the restore image you previously posted. I was just trying to install internally but it wont let me

what kp? in my case whatevergreen don't work in usb installation. only kp

[Joseph Pressinger]

3 hours ago, MaLd0n said:

@El Patas inject device ec

 

what kp? in my case whatevergreen don't work in usb installation. only kp

I did some research and I searched up the uuid of the kernel extension which was panicking and apparently smc-battery sensor is very buggy on big sur/

 

[MaLd0n]

4 hours ago, Joseph Pressinger said:

I did some research and I searched up the uuid of the kernel extension which was panicking and apparently smc-battery sensor is very buggy on big sur/

 

remove it. i'm using acpibattery from Rehabman

[lukasknw]

unfortunately opencore stands still at the very beginning. will you check the configuration?

Send me iMac-ukasz.zip

[MaLd0n]

14 hours ago, lukasknw said:

unfortunately opencore stands still at the very beginning. will you check the configuration?

DSDT.aml.zip

remove all ssdts

[lukasknw]

6 hours ago, MaLd0n said:

DSDT.aml.zip 36.4 kB · 3 downloads

remove all ssdts

still

jpg.zip

[MaLd0n]

5 hours ago, lukasknw said:

still

this problem is about Booter Quirks

[lukasknw]

1 hour ago, MaLd0n said:

this problem is about Booter Quirks

you can direct me which options to change?

[lukakeiton]

Hi, first of all thank you!

I have a little problem with wifi, if I boot with no kexts, Hackintool recognises the mini-pcie bcm94352hmb. I have tried with AirportBrcmFixup + FakePCIID + FakePCIID_Broadcom_WiFi.kext but no luck. Is there any patch for make this work? Bluetooth is recognised.

 

EDIT: I have been reading for hours and my conclusion is that it should exist a DSDT patch. Now, may problem is that I don't know how it works. Any help? Thank you.

Edited July 11, 2020 by lukakeiton
Add information

[MaLd0n]

7 hours ago, lukasknw said:

you can direct me which options to change?

u need test. read docs from. OpenCore bootloader about it

5 hours ago, lukakeiton said:

Hi, first of all thank you!

inject pci14e4,43a0

[greecedrummer]

Hello, I have the same problem, no matter what I do, USB error. I wonder how can I get the RX 5700 without WEG get going?
I uploaded my config.
Respect your work here!

greecedrummer.zip

[MaLd0n]

43 minutes ago, greecedrummer said:

Hello, I have the same problem, no matter what I do, USB error. I wonder how can I get the RX 5700 without WEG get going?

u can use a patch from piker-alpha, pikera is that

remove ssdts, use dsdt only

DSDT.aml.zip

[lukakeiton]

59 minutes ago, MaLd0n said:

inject pci14e4,43a0

I have searched how to do this, but OpenCore is new to me. How can I inject this string and what is the name of the key? Is it "compatible" as a string? As far as I red, I suppose that injections should be in DevicePropieties. In fact, if I don't use AirportBrcmFixup.kext, it shows the Broadcom card as a PCI device in system report.

 

I have recompiled this kext with the last modification in GitHub. No lucky at the moment.

[MaLd0n]

1 hour ago, lukakeiton said:

I have recompiled this kext with the last modification in GitHub. No lucky at the moment.

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A