[Guide] Install/Restore BigSur with OpenCore

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

Alden · June 28, 2020

Could you tell me how to manage to make Wifi work? Or I’d better wait for an update of AirportBrcmFixup.kext

Wifi card is bcm94352z. (Bluetooth works well)

Edited June 28, 2020 by Alden

asapreta · June 28, 2020

Fiquei com uma dúvida.

Já com o Big Sur instalado, Instalei o Command Line Developer Tools e rodei os comandos baixados daqui:

OpenCorePKG.command & OlarilaOC.command

O primeiro eu vi que criou no ~/usuário/OpenCorePKG dentro de binaries eu acho o OC mais recente porque baixou do repositório. Ok. Entendido. Mas...

Ao rodar o OlarilaOC, são criadas duas pastas no desktop. A OlarilaOC e a OlariaOC Release. A primeira tem além do OC os kexts e tudo mais, porém eu vi que são os "códigos" dos KEXTS não eles em sí. A outra pasta está vazia. Então fiquei perdido.
Era para ter os KEXTs e com isso ter uma versão mais 'atualizada' de tudo, claro que copiando o novo OC e os kexts iguais aos que tenho sobrepondo. Mas acho que algo ficou perdido no meio do caminho.

O que eu deveria fazer?

Soman · June 28, 2020

10 hours ago, MaLd0n said:

what hardware?

é bom. pq já tem alguns updates

Gigabyte H77-DS3H, Core i5, 16GB RAM, ATI Radeon Rx560.

johnnybravo · June 28, 2020

Thanks MaLd0n! Works great!

Thegn · June 28, 2020

I wish to send you a Big Thank you, MaLd0n!

I got it working easily with the help of your files and guide Basically I took my working OC folder for Catalina, updated OC and Kexts with your scripts, copied the updated files to my "old" Catalina OC folder, and finally changed the config.plist with the two NVRAM entries.

I have Big Sur on an old external SSD connected by USB, and I will probably test to clone it to an internal SSD later today.

I haven't tested if all hardware works, as I just got it installed a couple of minutes ago, but audio works, Eehernet works, and it finds my Intel 530 graphics as well as my Radeon VII card. I will test USB 3.0 later.

Again, many thank's for all your help!

Edited June 28, 2020 by Thegn

SergejSD · June 28, 2020

Thanks MaLd0n! Super!!!

DrDrumm · June 28, 2020

Awesome guide @MaLd0n

I managed to dd to a separate SSD but when booting, I get a black screen before what I assume would be the login window.

I have Vega 64 and can boot using the same config into Catalina with no problem (Although I've been using Clover up until now, I manged to build an OC EFI, in preparation for Big Sur). I've tried with and without agpmod=pikera. My Kexts are up to date.

My MB is ASUS Maximus Hero X WIFI AC

I've attached my EFI folder

EFI.zip

Edited June 28, 2020 by DrDrumm

Abbas Mohammed · June 28, 2020

13 hours ago, MaLd0n said:

check a OpenCore GUIDE for full solution

https://www.olarila.com/topic/8918-opencore-vanilla-guide-step-by-step-full-dsdt-patched-or-ssdt/

tenta copiar pro seu drive

Hey bro
initially I tried Clover but failed see screenshot one. then I tried opencore 0.6.0 but stuck on Apple logo

Please help

MorenoAv · June 28, 2020

I managed to install MacOS Big Sur following the guide from 1 st page, but after some time I lost sound, my bluetooth was touch and go, so I decided to start again, following the guide and it all appeared to go well...

But when I rebooted the machine I only have one entry in OpenCore boot menu macOS Catalina, for some reason I go to disk utility and found that the disk0 was not initialized, I tried to erase it, but no dice it gives error...

How do i solve this?

Captura de ecrã 2020-06-28, às 12.28.03.zip

PS: Solved erased it with terminal...

Edited June 28, 2020 by MorenoAv

mathewgx · June 28, 2020

@MaLd0n, is it possible to install image on a partiton (e.g. disk1s1) instead of a disk?

kevin0007 · June 28, 2020

Hi, @MaLd0n thanks for your tutorial...I did same as you mentioned in your post..I used your provided efi without any modification but at first boot I got kernel panic

IMG_0042.zip

Marck00 · June 28, 2020

Hey, everybody, does anyone else get something like this a lot?

Disk1s5s1: device is not readable.

On diskutil it appears as a snapshot

MaLd0n · June 28, 2020

17 hours ago, Alden said:

Wifi card is bcm94352z.

inject 43a0

16 hours ago, asapreta said:

OpenCorePKG.command & OlarilaOC.command

deve ser o xcode. ainda não testei no BS

15 hours ago, Soman said:

Gigabyte H77-DS3H, Core i5, 16GB RAM, ATI Radeon Rx560.

work good

15 hours ago, johnnybravo said:

Thanks MaLd0n! Works great!

Enjoy, Johnny!

12 hours ago, Thegn said:

I wish to send you a Big Thank you, MaLd0n!

Enjoy, Thegn!

10 hours ago, SergejSD said:

Thanks MaLd0n! Super!!!

Enjoy, SergejSD!

asapreta · June 28, 2020

2 minutes ago, MaLd0n said:

deve ser o xcode. ainda não testei no BS

Era para ter acontecido o que?

MaLd0n · June 28, 2020

9 hours ago, DrDrumm said:

Awesome guide

csm disabled?

Alden · June 28, 2020

2 minutes ago, MaLd0n said:

inject 43a0

Could you please send me the instruction.

MaLd0n · June 28, 2020

5 hours ago, mathewgx said:

@MaLd0n, is it possible to install image on a partiton (e.g. disk1s1) instead of a disk?

restore to entire and clean disk, not partition

4 hours ago, kevin0007 said:

Hi, @MaLd0n thanks for your tutorial...I did same as you mentioned in your post..I used your provided efi without any modification but at first boot I got kernel panic

what ur hardware?

1 hour ago, Marck00 said:

Disk1s5s1: device is not readable.

restore to entire disk not partition

9 minutes ago, asapreta said:

Era para ter acontecido o que?

não sei se precisa do xcode full ou somente o command line

9 minutes ago, Alden said:

inject via devices properties, ssdt or dsdt

Alden · June 28, 2020

15 minutes ago, MaLd0n said:

inject via devices properties, ssdt or dsdt

I’m a novice. I’m sorry to bother you but could you instruct me to inject this. I’m still skeptical of it.

Marck00 · June 28, 2020

23 minutes ago, MaLd0n said:

restore to entire and clean disk, not partition

what ur hardware?

restore to entire disk not partition

não sei se precisa do xcode full ou somente o command line

inject via devices properties, ssdt or dsdt

I already restored the entire disk, the system works perfectly, but before starting it appears many times that message, I have the doubt if it is normal or not

Edited June 28, 2020 by Marck00

MaLd0n · June 28, 2020

2 minutes ago, Alden said:

I’m a novice. I’m sorry to bother you but could you instruct me to inject this. I’m still skeptical of it.

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

3 minutes ago, Marck00 said:

The operating system works and everything, I only have the doubt if it is normal that when booting, that message appears repeatedly

post one photo

asapreta · June 28, 2020

4 minutes ago, Marck00 said:

I already restored the entire disk, the system works perfectly, but before starting it appears many times that message, I have the doubt if it is normal or not

Same happens here but as far as I know everything is working.

25 minutes ago, MaLd0n said:

não sei se precisa do xcode full ou somente o command line

Instalei ambos no Big Sur antes de rodar os comandos.

Uma pasta ficou vazia e a outra como eu disse.

Marck00 · June 28, 2020

7 minutes ago, MaLd0n said:

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

post one photo

Edited June 28, 2020 by Marck00

Alden · June 28, 2020

12 minutes ago, MaLd0n said:

https://www.olarila.com/files/Utils/RunMe.app.zip
https://www.youtube.com/watch?v=k9wmIfGLe3A

Here you go. Thanks

https://drive.google.com/file/d/1v6boxC_m6OlGoV0flpNIuUG5gIkRnVRG/view?usp=sharing

Marck00 · June 28, 2020

18 minutes ago, asapreta said:

Same happens here but as far as I know everything is working.

I think so, I had the doubt if the copy was not right or if it is related to OpenCore

MaLd0n · June 28, 2020

40 minutes ago, Marck00 said:

restore to entire disk

37 minutes ago, Alden said:

Here you go. Thanks

Archive.zip

Sign In

[Guide] Install/Restore BigSur with OpenCore

Recommended Posts

Alden

asapreta

Soman

johnnybravo

Thegn

SergejSD

DrDrumm

Abbas Mohammed

MorenoAv

mathewgx

kevin0007

Marck00

MaLd0n

asapreta

MaLd0n

Alden

MaLd0n

Alden

Marck00

MaLd0n

asapreta

Marck00

Alden

Marck00

MaLd0n

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity