Hackintosh Guide - Mojave / Catalina on Mobos Series 5, 6, 7, 8 and 9 with OpenCore Bootloader

[MaLd0n]

2 hours ago, techo91 said:

Hi guys,

start again

https://www.olarila.com/topic/5794-hackintosh-guide-install-macos-with-vanilla-olarila-image-step-by-step-install-and-post-install-windows-linux-or-mac/

30 minutes ago, Bid Onsos said:

THanks

check useful links

https://www.olarila.com/topic/6129-useful-links/

[Bid1]

On 10/4/2020 at 8:31 PM, MaLd0n said:

DSDT.aml.zip 24.75 kB · 1 download

Hi,

As I mentioned before, with the new dsdt and config file system works well.  But I have a few issues left.

1. System does not power off on shut down.  It goes through the process screen becomes black Sleep/hibernate does not work, .
2. Does not go to sleep mode neither by closing the lid nor by choosing sleep from menu

I tried to upload my send file but t is larger than allowed size.  I also tried to go through donnation chatroom, it does not recognize me, I used another account

Any help is sincerely appreciated. ThanksSend me rog53sws-MacBook-Pro P1.zip

Just now, Bid1 said:

Hi,

As I mentioned before, with the new dsdt and config file system works well.  But I have a few issues left.

1. System does not power off on shut down.  It goes through the process screen becomes black Sleep/hibernate does not work, .
2. Does not go to sleep mode neither by closing the lid nor by choosing sleep from menu

I tried to upload my send file but t is larger than allowed size.  I also tried to go through donnation chatroom, it does not recognize me, I used another account

Any help is sincerely appreciated. Thanks

 

Send me rog53sws-MacBook-Pro P3.zip

On 10/4/2020 at 8:31 PM, MaLd0n said:

DSDT.aml.zip 24.75 kB · 1 download

Hi,

As I mentioned before, with the new dsdt and config file system works well.  But I have a few issues left.

1. System does not power off on shut down.  It goes through the process screen becomes black Sleep/hibernate does not work, .
2. Does not go to sleep mode neither by closing the lid nor by choosing sleep from menu

I tried to upload my send file but t is larger than allowed size.  I also tried to go through donnation chatroom, it does not recognize me, I used another account

Any help is sincerely appreciated. Thanks

 

 

Send me rog53sws-MacBook-Pro P2.zip

[MaLd0n]

5 hours ago, Bid1 said:

Hi,

check donators room

[Bid1]

On 10/6/2020 at 4:07 AM, MaLd0n said:

check donators room

Where is the donators room, I logged on and see nothing?  I am sure I am doing something wrong?

Could you tell me how to get there?  Never mind I figured it out

Thanks

Edited October 7, 2020 by Bid1

[iFabio]

Hello Maldon

I prepared the usb for Big Sur installation with Opencore, it hangs here see photo

advice

 

 

Edited November 16, 2020 by iFabio

[iFabio]

I redid various tests, but it always restarts at 12 minutes

https://easyupload.io/yeniab

Edited November 16, 2020 by iFabio

[MaLd0n]

7 hours ago, iFabio said:

I redid various tests, but it always restarts at 12 minutes

u need boot again and again and again

[iFabio]

14 hours ago, MaLd0n said:

u need boot again and again and again

Hello Maldon

ok i try

[iFabio]

Hello Maldon

after 10 reboots always the same thing

here are the photos before reboot

advice

 

 

[MaLd0n]

no idea what happens

[iFabio]

Hello Maldon

i am trying to use OpenCore 0.63 on Catalina, if i put your DSDT i have a kernel panic if i don't use your DSDT i get to the desktop

see photos and Efi OC

https://easyupload.io/6eg8w2

advice

T

Thanks

Edited November 19, 2020 by iFabio

[MaLd0n]

13 hours ago, iFabio said:

Hello Maldon

need edit for opencore

[BakaPhoenix]

Hello, i use a gigabyte h55m-usb3 that use bios and not uefi, i still do the same steps on uefi part?

 

I also have a ssdt i requested here in the past and made my usb mapping using hackintools in the past, can i reuse them on opencore?

Edited December 2, 2020 by BakaPhoenix

[MaLd0n]

5 hours ago, BakaPhoenix said:

that use bios and not uefi, i still do the same steps on uefi part?

in this case need read manual

[pepe21]

Hello MaLd0n, 

I have Big Sur installed with OpenCore, everything seems to be working good except the graphics.

I have 2 graphics card on my PC:

PCI Slot1: GTX 970

PCI Slot2: GTX 650

I also have 2 monitors:

-HP OMEN 25 connected to GTX 650 by DVI.

-Samsung C32JG5x connected to both 650 (by HDMI) & 970 (by DP).

When I boot the hackintosh, it starts on PCI Slot1, verbose process finish and then I have the problem:

Both DVI & HDMI are working, but OS X detects 3 screens, not 2.

The problem is I need to mirror displays so I can see the main one, the DVI and HDMI displays connected to 650 are not the principal display.

Do you know what can I do? Maybe disable PCI Slot1?

I attach some screenshots for further information and RunMe.zip.

Thanks in advance for your help!!

Send me Vicentes-iMac.zip

Edited December 3, 2020 by pepe21

[BakaPhoenix]

10 hours ago, MaLd0n said:

in this case need read manual

So i do this step?

https://dortania.github.io/OpenCore-Install-Guide/installer-guide/mac-install.html#legacy-setup

Instead what step in the written guide? 10? or in addition to it

Thanks

Edited December 3, 2020 by BakaPhoenix

[noxnet]

A melhor versão para um notebook com placa série 6 e GPU integrada HD Graphics 3000?

[MaLd0n]

49 minutes ago, noxnet said:

A melhor versão para um notebook com placa série 6 e GPU integrada HD Graphics 3000?

Sierra or High Sierra

[IUTniun]

404 Not Found

404 Not Found. --OPENCORE FOLDERS--

 

--CHIPSET SERIES 8, 9 (HASWELL)

https://tinyurl.com/y5stfvyb

 

[MaLd0n]

1 hour ago, IUTniun said:

404 Not Found. --OPENCORE FOLDERS--

ye. im updating