Guest Eryk Posted February 7, 2020 Posted February 7, 2020 Hi, I've got a little problems. I succesfully installed Catalina with help from a friend, but even he wasnt able to make touchpad and wifi to work properly. My touchpad is Synaptics *SYN0334 (Lenovo pointing device). With current kexts etc it work till I put two fingers on it. Then it freezes and wont work anymore.... Physical buttons (left and right mouse buttons) dont work either. I dunno whick kext use to make it work... I dont need support for 3+ fingers. I want only to make it work good enough to get rid of physical mouse... Another problem is wifi. Main problem is that this is Dell 1702 PCI\VEN_168C&DEV_002B&CC_0280 so its Atheros which is not officialy supported in Catalina... I tried Atheros installer for macOS Mojave and Catalina 2.0 with disabled SIP, but it didnt work... Do I really have to change card to some Broadcom? Please tell me what you want me to send (config.plist etc), and I'll post it asap. Thanks for reply :)
intommy Posted February 7, 2020 Posted February 7, 2020 about wifi, check this, (maybe you already did) Build 1: Intel i5-6600 Skylake, GA-B150m-D3H, 8GB DDR4, ASROCK Radeon RX 590 Phantom Gaming X 8G OC, 512GB - LENSE20512GMSP34MEAT2TA (NVMe) - windows / Patriot Burst 240 Sata macOS Catalina, Fractal Design Meshify C Mini Dark TG, Corsair RM650x, Catalina 10.15.4./ Win10 Build 2: Toshiba Tecra z40-c-11e, Intel Core i5 6200U Skylake, 8GB DDR3, Intel HD Graphics 520, Kingston UV500 240GB (SUV500/240G), BroadCom BCM94360CS2 + 12+6 Pin WIFI wireless card module to NGFF M.2,, Catalina 10.15.4 Build 3: Optiplex 790, Intel Core i3 (2nd Gen) 2120 / 3,3GHz, Intel Q65 Express, 8GB DDR3 (4x2GB), MSI GTX 760 - 2GB, Patriot Burst SSD 120GB, BroadCom BCM94360CS2 + 12+6 Pin WIFI wireless card module to NGFF M.2, Catalina 10.15.4. Build 4: Lenovo L340-15IRH Gaming Laptop - Type 81LK (81LK0034CK), Intel Core i5 9300H (2,40-4,10GHz), 8GB DDR4 2400MHz (1x8), Intel UHD Graphics 630, Catalina 10.15.4 / Windows 10 (Patriot Burst 240GB SATA3 SSD / M.2 PCIe SSD 512GB), DW1820a, atm not work: Wifi 5GHz, only 2,4 and BT.
erystr Posted February 7, 2020 Posted February 7, 2020 4 hours ago, intommy said: about wifi, check this, (maybe you already did) Well I tried almost everything... I think that only what left is just buy on Ali any supported half-mini-pcie card based on BCM... For now I managed to use my android phone as router (usb tethering) so maybe its problematic (without usb cable there's no internet) but internet finally works without lan cable Now I want to get rid of mouse so I really want to fix this touchpad... Any solutions anyone?
intommy Posted February 7, 2020 Posted February 7, 2020 Show urs EFI/Clover folder Build 1: Intel i5-6600 Skylake, GA-B150m-D3H, 8GB DDR4, ASROCK Radeon RX 590 Phantom Gaming X 8G OC, 512GB - LENSE20512GMSP34MEAT2TA (NVMe) - windows / Patriot Burst 240 Sata macOS Catalina, Fractal Design Meshify C Mini Dark TG, Corsair RM650x, Catalina 10.15.4./ Win10 Build 2: Toshiba Tecra z40-c-11e, Intel Core i5 6200U Skylake, 8GB DDR3, Intel HD Graphics 520, Kingston UV500 240GB (SUV500/240G), BroadCom BCM94360CS2 + 12+6 Pin WIFI wireless card module to NGFF M.2,, Catalina 10.15.4 Build 3: Optiplex 790, Intel Core i3 (2nd Gen) 2120 / 3,3GHz, Intel Q65 Express, 8GB DDR3 (4x2GB), MSI GTX 760 - 2GB, Patriot Burst SSD 120GB, BroadCom BCM94360CS2 + 12+6 Pin WIFI wireless card module to NGFF M.2, Catalina 10.15.4. Build 4: Lenovo L340-15IRH Gaming Laptop - Type 81LK (81LK0034CK), Intel Core i5 9300H (2,40-4,10GHz), 8GB DDR4 2400MHz (1x8), Intel UHD Graphics 630, Catalina 10.15.4 / Windows 10 (Patriot Burst 240GB SATA3 SSD / M.2 PCIe SSD 512GB), DW1820a, atm not work: Wifi 5GHz, only 2,4 and BT.
erystr Posted February 10, 2020 Posted February 10, 2020 https://drive.google.com/drive/folders/1BvFjXJVIOGRt-kty4SFuCVkMNw9irlj_?usp=sharing Heres my full EFI folder
Administrators MaLd0n Posted February 10, 2020 Administrators Posted February 10, 2020 19 minutes ago, erystr said: Heres my full EFI folder post one full dump https://www.olarila.com/files/Utils/RunMe.app.ziphttps://www.youtube.com/watch?v=k9wmIfGLe3A -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
erystr Posted February 10, 2020 Posted February 10, 2020 4 hours ago, MaLd0n said: post one full dump https://www.olarila.com/files/Utils/RunMe.app.ziphttps://www.youtube.com/watch?v=k9wmIfGLe3A https://drive.google.com/open?id=1EPCah0dy1oQvsaP0UYiB7QLp4ddFxK7S here you have this created file donated
Administrators MaLd0n Posted February 10, 2020 Administrators Posted February 10, 2020 33 minutes ago, erystr said: https://drive.google.com/open?id=1EPCah0dy1oQvsaP0UYiB7QLp4ddFxK7S here you have this created file donated check if work CLOVER.zip ur trackpad is just a correct kext what wifi card? -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
erystr Posted February 10, 2020 Posted February 10, 2020 (edited) Well I dont really know does this fixed this because now after your fix i have error "OCABC: found legacy aptiomemoryfix driver!" and I cant boot OSX xD I replaced files from your archive and merged the same folders (like kexts with kexts etc) Edited February 10, 2020 by erystr
Administrators MaLd0n Posted February 10, 2020 Administrators Posted February 10, 2020 43 minutes ago, erystr said: and I cant boot OSX post one photo -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
erystr Posted February 10, 2020 Posted February 10, 2020 2 minutes ago, MaLd0n said: post one photo Clover even doesnt start. This error i mentioned only displays at booting...
Administrators MaLd0n Posted February 10, 2020 Administrators Posted February 10, 2020 3 minutes ago, erystr said: Clover even doesnt start. This error i mentioned only displays at booting... back to ur old efi folder and disable _dsm to xdsm patch, put my dsdt into clover/acpi/patched -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
erystr Posted February 10, 2020 Posted February 10, 2020 With a little problems but I recovered working backuped efi (i write it on hack). Can you tell me that same but made for "lame's"?
Administrators MaLd0n Posted February 10, 2020 Administrators Posted February 10, 2020 35 minutes ago, erystr said: With a little problems but I recovered working backuped efi (i write it on hack). ever stay with one bootable usb with ur files in efi partition, easy boot to system if need -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
erystr Posted February 11, 2020 Posted February 11, 2020 Okay, i put dsdt and it oots up succesfully but I dunno how to disable _dsm to xdsm patch... Also, while touchpad is freezed I invented that when i put 4 fingers separated on touchpad, it gets back to "normal", until i put 2 fingers again on it...
erystr Posted February 11, 2020 Posted February 11, 2020 Okay, I managed to disable "change _DSM to XDSM". Now touchpad doesnt work anymore xD with enabled it works only with one finger. Placing two or more fingers freezes it and I have to touch it with 4 fingers to unfreeze it
erystr Posted February 13, 2020 Posted February 13, 2020 Sorry for bothering anybody... Problem is solved. I deleted all voodool2c kexts, left only voodoo-input/hda/ps2 and also I deleted existing ps2 and downloaded Rehabman's ps2 kext and now after restart everything works perfectly except 3+fingers gestures, and some more advanced 2-finger gestures like zoom in/out. But I'm very happy with working fully working touchpad+buttons+2f-scroll... Only wifi card left but I'm still searching for working broadcom card 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now