MSI RX580 Not working

[afrasiabi]

Hi

I got

GYGABYTE Z370 HD3 + MSI Armor RX580 8GB OC + i7-9700K

I used Olarila to Install Catalina and it was successful but RX580 does not recognized

Olaria USB Installation Default EFI Partition has "Lilu.kext" and "Whatevergreeen.kext" but It is not working.

I read every single thread about RX580 and Z370-HD3 and follow the Instructions but they didn't help.

I bought RX580 because it supposed to work OOB but it didn't.

my bios setting is :

Save & Exit → Load Optimized Defaults

M.I.T. → Advanced Memory Settings Extreme Memory Profile(X.M.P.) : Profile 1

BIOS → Fast Boot : Disabled

BIOS → CMS Support: Disabled

BIOS → LAN PXE Boot Option ROM : Disabled

Peripherals → Super IO Configuration → Serial Port : Disabled

Peripherals → USB Configuration → XHCI Hand-off : Enabled

Chipset → Vt-d : Disabled

I tried IGPU "Enabled" , "Disabled" and "Auto". but none of them worked neither for IGPU or RX580

I attached screenshot of "Hackintool" that shows PCI devices section and it sees my graphics card but macOS does not recognize it.

I ran "run me.app" and attached the resault

what DSDT.aml should I use ? what about SSDT ?

is there any specific ACPI patch should I use to configure the "config.plist"

Send me Mac-Pro.zip

Screenshots.zip

[MaLd0n]

[ref]afrasiabi[/ref], bios settings, only disable csm, nothing more

[misterdray]

you need to modify 2 kext in S/L/E. Heres what I did:

I had to edit the AMD9510Controller.kext and AMDRadeox4100.kext under S/L/E and add '0x67DF1002' to this for our cards to be fully recognized with acceleration as '0x67EF1002' is only under IOPCIMatch string.

In Clover Configurator under Devices I added '0x67DF1002' without the quotes to the ATI under Fake ID and also under Graphics I check marked 'Inject ATI' added '4096' to VRAM and 'Nonsense' under FB Name.

Here is those texts I modified:

https://drive.google.com/file/d/14FqWXQbpz5uVYk2-yXPUj44JnX2sZuiU/view?usp=drivesdk

[afrasiabi]

[ref]afrasiabi[/ref], bios settings, only disable csm, nothing more

Thanks but it didn't help

Added in 3 minutes 3 seconds:

you need to modify 2 kext in S/L/E. Heres what I did:

I had to edit the AMD9510Controller.kext and AMDRadeox4100.kext under S/L/E and add '0x67DF1002' to this for our cards to be fully recognized with acceleration as '0x67EF1002' is only under IOPCIMatch string.

In Clover Configurator under Devices I added '0x67DF1002' without the quotes to the ATI under Fake ID and also under Graphics I check marked 'Inject ATI' added '4096' to VRAM and 'Nonsense' under FB Name.

Here is those texts I modified:

https://drive.google.com/file/d/14FqWXQbpz5uVYk2-yXPUj44JnX2sZuiU/view?usp=drivesdk

Thanks bud that didnt work , after configuration the Clover "config.plist" macOS didn't boot, computer went into a "restart loop"

Added in 2 minutes 7 seconds:

[ref]afrasiabi[/ref], bios settings, only disable csm, nothing more

you are like a god in this hackintosh area , please help me.

[MaLd0n]

[ref]afrasiabi[/ref], first use a correct folder, serie 100/200/300

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

apply this patch

 

into device label PEGP parent_label PEG0 insert
begin
Name (_SUN, One)  // _SUN: Slot User Number\n
Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method\n
                   {\n
                       If (!Arg2)\n
                       {\n
                           Return (Buffer ()\n
                           {\n
                                0x03\n
                           })\n
                       }\n
                       Return (Package ()\n
                       {\n
                           "device-id",\n 
                           Buffer ()\n
                           {\n
                                0xDF, 0x67, 0x00, 0x00\n  
                           }\n
                       })\n
                   }\n
end

[afrasiabi]

[ref]afrasiabi[/ref], first use a correct folder, serie 100/200/300

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

apply this patch

 

into device label PEGP parent_label PEG0 insert
begin
Name (_SUN, One)  // _SUN: Slot User Number\n
Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method\n
                   {\n
                       If (!Arg2)\n
                       {\n
                           Return (Buffer ()\n
                           {\n
                                0x03\n
                           })\n
                       }\n
                       Return (Package ()\n
                       {\n
                           "device-id",\n 
                           Buffer ()\n
                           {\n
                                0xDF, 0x67, 0x00, 0x00\n  
                           }\n
                       })\n
                   }\n
end

 

Thank you so much

[afrasiabi]

[ref]afrasiabi[/ref], first use a correct folder, serie 100/200/300

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

apply this patch

 

into device label PEGP parent_label PEG0 insert
begin
Name (_SUN, One)  // _SUN: Slot User Number\n
Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method\n
                   {\n
                       If (!Arg2)\n
                       {\n
                           Return (Buffer ()\n
                           {\n
                                0x03\n
                           })\n
                       }\n
                       Return (Package ()\n
                       {\n
                           "device-id",\n 
                           Buffer ()\n
                           {\n
                                0xDF, 0x67, 0x00, 0x00\n  
                           }\n
                       })\n
                   }\n
end

 

Don't kill me , but I don't find where should I apply the patch

[MaLd0n]

[ref]afrasiabi[/ref], Extract tables with F4 key in Clover boot screen, files generated in Clover/Acpi/origin, post here

[afrasiabi]

[ref]afrasiabi[/ref], Extract tables with F4 key in Clover boot screen, files generated in Clover/Acpi/origin, post here

 

I zipped all items in clover/acpi/origin

Acpi-origin-all items.zip

[MaLd0n]

[ref]afrasiabi[/ref], DSDT.aml.zip

use my dsdt with my full efi folder serie 100/200/300

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

[afrasiabi]

[ref]afrasiabi[/ref], DSDT.aml.zip

use my dsdt with mu full efi folder serie 100/200/300

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

 

First try :

I copied EFI folder serie 100/200/300 and copied your DSDT.aml into Clover/Acpi/Patched and restart the computer , computer came back with no changes.

Second try :

I restart Computer in Clover Bootloader I went to Options->ACPI->DSDT and I changed "BIOS.aml" to "DSDT.aml" after several lines goes up computer "Panicked" and restarts.

[MaLd0n]

[ref]afrasiabi[/ref],

[afrasiabi]

[ref]afrasiabi[/ref],

 

[MaLd0n]

[ref]afrasiabi[/ref], idk what happens, check if other ppl have same problem/solution

[afrasiabi]

[ref]afrasiabi[/ref], idk what happens, check if other ppl have same problem/solution

 

This is Clover->ACPI->origin (F4)

would you please take e look at it ?

origin.zip

[MaLd0n]

[ref]afrasiabi[/ref], DSDT.aml.zip

[afrasiabi]

[ref]afrasiabi[/ref], DSDT.aml.zip

 

Thanks for DSDT.aml

I was on a trip and i didn't try it yet but i will come back to my workstation and try it ASAP.

I have to put in Clover->ACPI->patched . right !?

and select it in clover boot menu , ha !?

another thing is i plugged my monitor to graphics card , someone told me that i have to plug it to mobo and boot up mac , then the OS will recognize it . and after that i can use graphics card. should I do that !? or what

and thank sooo much ????

[MaLd0n]

[ref]afrasiabi[/ref], what? forget internal graphics

[afrasiabi]

[ref]afrasiabi[/ref], what? forget internal graphics

 

I disabled internal graphics , and used your DSDT and it didn't worked

Sound works

Bluetooth works (with bluetooth dongle)

everything is fucking good BUT the graphics ,,,, I hate it becaus its like all people just put the fucking RX580 on every fucking mobo with every fucking possible installation method and it works like apple itself ! but me , tried every fucking possible way ...

[afrasiabi]

@mald0n

do you know how should I add RX580 manually to clover ?