Problem during installation (MacOs Mojave)

[onemanosx]

thanks brights works but now system were too laggy and touchpad won't works, i'll resend the zip file in a minute

Added in 12 minutes 41 seconds:

system won't respond stuck when apple logo finish then system stuck at the time of login

 

 

I wouldnt know the cause if it boots the first time but stuck upon your second reboot. Not enough information to troubleshoot.

[nikhilrathore_1999]

I wouldnt know the cause if it boots the first time but stuck upon your second reboot. Not enough information to troubleshoot.

on first boot it run too laggy and applications won't open so i hard reset

Added in 21 minutes 37 seconds:

I wouldnt know the cause if it boots the first time but stuck upon your second reboot. Not enough information to troubleshoot.

thank you I paste your config.plist and my laptop works fine with brightness indicator but no automatic adjustment were in preference pane and trackpad won't works thanks sorry for the above post

Added in 1 minute 46 seconds:

on first boot it run too laggy and applications won't open so i hard reset

Added in 21 minutes 37 seconds:

thank you I paste your config.plist and my laptop works fine with brightness indicator but no automatic adjustment were in preference pane and trackpad won't works thanks sorry for the above post

my trackpad and battery indicator fix please thank you onemanosx

Send me Nikhils-MBP.zip

[onemanosx]

thank you I paste your config.plist and my laptop works fine with brightness indicator but no automatic adjustment were in preference pane and trackpad won't works thanks sorry for the above post

Your debug files indicates that you are not using my clover folder except for the config.plist.

[nikhilrathore_1999]

Your debug files indicates that you are not using my clover folder except for the config.plist.

i used you folder but my system stuck when login screen arrives and trackpad not works as a mouse like before and system sucks ??

[onemanosx]

i used you folder but my system stuck when login screen arrives and trackpad not works as a mouse like before and system sucks ??

It will require a few more config changes before things can work. Be patient. You need to remove all of your nonsense SSDT and DSDT and only use my DSDT. You also need to remove unused kexts in clover.

For your system not to suck, you need to know what is exactly causing it and rectify it.

[nikhilrathore_1999]

It will require a few more config changes before things can work. Be patient. You need to remove all of your nonsense SSDT and DSDT and only use my DSDT. You also need to remove unused kexts in clover.

For your system not to suck, you need to know what is exactly causing it and rectify it.

i thing by using ur folder it is graphic problem that i've seen can i use fakeid 12345678 for intel hd620 because it stops when i enter password on login screen and loading then stop please guide me i foolow ur steps

[onemanosx]

graphic problem

Then you can solve this by injecting working device properties into config.plist.

 

please guide me i foolow ur steps

I had just advised you in my previous respond.

 

You need to remove all of your nonsense SSDT and DSDT and only use my DSDT. You also need to remove unused kexts in clover.

[nikhilrathore_1999]

Then you can solve this by injecting working device properties into config.plist.

 

I had just advised you in my previous respond.

 

what can i do to get into system because it stop responding after finish to apple logo

[onemanosx]

what can i do to get into system because it stop responding after finish to apple logo

You are expected to troubleshoot on your own. You can likely boot using your USB stick.

[nikhilrathore_1999]

You are expected to troubleshoot on your own. You can likely boot using your USB stick.

i finally think my laptop is not compatible with catalina i should go back to mojave

[nikhilrathore_1999]

You are expected to troubleshoot on your own. You can likely boot using your USB stick.

i finally get the solution if i remove those ssdt which was generated by runme app then system stuck but if i use your dsdt woth those ssdt and config. Plist then my system works fine but my trackpad only works as a mouse if i use i2chid with i2c kext but didn't got the gestures like 2 fingure etc

Only fix is left is trackpad

Can i send new debug file to u?? Btw thankyou very much

Added in 34 minutes 1 second:

this is my new debug file in which everything works except trackpad and slow boot (takes 1min30 seconds to boot) please fix thank you!!

Send me Nikhils-MBP.zip

[onemanosx]

[ref]nikhilrathore_1999[/ref], You only need to boot with my DSDT. SSDT are not required. You are also expected to remove VoodooI2CHID kext. Thereafter, I need a new sendme once reboot.

[nikhilrathore_1999]

[ref]nikhilrathore_1999[/ref], You only need to boot with my DSDT. SSDT are not required. You are also expected to remove VoodooI2CHID kext. Thereafter, I need a new sendme once reboot.

[ref]nikhilrathore_1999[/ref], You only need to boot with my DSDT. SSDT are not required. You are also expected to remove VoodooI2CHID kext. Thereafter, I need a new sendme once reboot.

if i remove ssdts then system stucks and but i use ur dsdt and config.plist and remove extra kext if i remove anything from it then system stucks i've tried everything

[onemanosx]

if i remove ssdts then system stucks

You need to be more descriptive. What SSDT did you remove? Where does it stuck? What is the verbose message?

 

i use ur dsdt and config.plist and remove extra kext if i remove anything from it then system stucks

What kexts did you remove? You are only required to remove VoodooI2CHID kext.

This is what you should do:

1. Use my DSDT with config.plist

2. Remove VoodooI2CHID kext

3. Reboot.

4. Extract sendme.

[nikhilrathore_1999]

You need to be more descriptive. What SSDT did you remove? Where does it stuck? What is the verbose message?

 

What kexts did you remove? You are only required to remove VoodooI2CHID kext.

This is what you should do:

1. Use my DSDT with config.plist

2. Remove VoodooI2CHID kext

3. Reboot.

4. Extract sendme.

I attached debug file(fix required battery drainage, trackpad)

Send me Nikhils-MacBook-Pro.zip

[onemanosx]

[ref]nikhilrathore_1999[/ref],

 

kernel: considerRebuildOfPrelinkedKernel com.alexandred.VoodooI2CServices triggered rebuild

1. Rebuild permissions and kextcache required.

If you had installed kexts in L/E or S/L/E, this is the time to remove them.

2. Replace DSDT and config.plist. https://drive.google.com/file/d/1SxZFRCtSan5QDbuZI6rfSswC4l71-m-j/view?usp=sharing

3. Reboot.

4. Extract new sendme

[nikhilrathore_1999]

[ref]nikhilrathore_1999[/ref],

 

kernel: considerRebuildOfPrelinkedKernel com.alexandred.VoodooI2CServices triggered rebuild

1. Rebuild permissions and kextcache required.

If you had installed kexts in L/E or S/L/E, this is the time to remove them.

2. Replace DSDT and config.plist. https://drive.google.com/file/d/1SxZFRCtSan5QDbuZI6rfSswC4l71-m-j/view?usp=sharing

3. Reboot.

4. Extract new sendme

how to run this code you've mentioned

Added in 24 minutes 14 seconds:

[ref]nikhilrathore_1999[/ref],

 

kernel: considerRebuildOfPrelinkedKernel com.alexandred.VoodooI2CServices triggered rebuild

1. Rebuild permissions and kextcache required.

If you had installed kexts in L/E or S/L/E, this is the time to remove them.

2. Replace DSDT and config.plist. https://drive.google.com/file/d/1SxZFRCtSan5QDbuZI6rfSswC4l71-m-j/view?usp=sharing

3. Reboot.

4. Extract new sendme

i rebuild kexkcache in terminal via sudo kextcache -i / and reboot then got acpi table errors

[tphoto]

Can someone help me i can't install mojave it stucks at verbose.IMG_20191201_165045.jpg.zip

[nikhilrathore_1999]

how to run this code you've mentioned

Added in 24 minutes 14 seconds:

i rebuild kexkcache in terminal via sudo kextcache -i / and reboot then got acpi table errors

I followed what you've said no I got this error shown at boot attached below:

https://drive.google.com/open?id=1W1vTLOxGu29jSxHpjajC9kqb6vXIBpkG

[onemanosx]

[ref]nikhilrathore_1999[/ref], Remove SSDTs. The errors were there since the beginning even before using my DSDT.