Problem during installation (MacOs Mojave)

[nikhilrathore_1999]

You are expected to troubleshoot on your own. You can likely boot using your USB stick.

i finally get the solution if i remove those ssdt which was generated by runme app then system stuck but if i use your dsdt woth those ssdt and config. Plist then my system works fine but my trackpad only works as a mouse if i use i2chid with i2c kext but didn't got the gestures like 2 fingure etc

Only fix is left is trackpad

Can i send new debug file to u?? Btw thankyou very much

Added in 34 minutes 1 second:

this is my new debug file in which everything works except trackpad and slow boot (takes 1min30 seconds to boot) please fix thank you!!

Send me Nikhils-MBP.zip

[onemanosx]

[ref]nikhilrathore_1999[/ref], You only need to boot with my DSDT. SSDT are not required. You are also expected to remove VoodooI2CHID kext. Thereafter, I need a new sendme once reboot.

[nikhilrathore_1999]

[ref]nikhilrathore_1999[/ref], You only need to boot with my DSDT. SSDT are not required. You are also expected to remove VoodooI2CHID kext. Thereafter, I need a new sendme once reboot.

[ref]nikhilrathore_1999[/ref], You only need to boot with my DSDT. SSDT are not required. You are also expected to remove VoodooI2CHID kext. Thereafter, I need a new sendme once reboot.

if i remove ssdts then system stucks and but i use ur dsdt and config.plist and remove extra kext if i remove anything from it then system stucks i've tried everything

[onemanosx]

if i remove ssdts then system stucks

You need to be more descriptive. What SSDT did you remove? Where does it stuck? What is the verbose message?

 

i use ur dsdt and config.plist and remove extra kext if i remove anything from it then system stucks

What kexts did you remove? You are only required to remove VoodooI2CHID kext.

This is what you should do:

1. Use my DSDT with config.plist

2. Remove VoodooI2CHID kext

3. Reboot.

4. Extract sendme.

[nikhilrathore_1999]

You need to be more descriptive. What SSDT did you remove? Where does it stuck? What is the verbose message?

 

What kexts did you remove? You are only required to remove VoodooI2CHID kext.

This is what you should do:

1. Use my DSDT with config.plist

2. Remove VoodooI2CHID kext

3. Reboot.

4. Extract sendme.

I attached debug file(fix required battery drainage, trackpad)

Send me Nikhils-MacBook-Pro.zip

[onemanosx]

[ref]nikhilrathore_1999[/ref],

 

kernel: considerRebuildOfPrelinkedKernel com.alexandred.VoodooI2CServices triggered rebuild

1. Rebuild permissions and kextcache required.

If you had installed kexts in L/E or S/L/E, this is the time to remove them.

2. Replace DSDT and config.plist. https://drive.google.com/file/d/1SxZFRCtSan5QDbuZI6rfSswC4l71-m-j/view?usp=sharing

3. Reboot.

4. Extract new sendme

[nikhilrathore_1999]

[ref]nikhilrathore_1999[/ref],

 

kernel: considerRebuildOfPrelinkedKernel com.alexandred.VoodooI2CServices triggered rebuild

1. Rebuild permissions and kextcache required.

If you had installed kexts in L/E or S/L/E, this is the time to remove them.

2. Replace DSDT and config.plist. https://drive.google.com/file/d/1SxZFRCtSan5QDbuZI6rfSswC4l71-m-j/view?usp=sharing

3. Reboot.

4. Extract new sendme

how to run this code you've mentioned

Added in 24 minutes 14 seconds:

[ref]nikhilrathore_1999[/ref],

 

kernel: considerRebuildOfPrelinkedKernel com.alexandred.VoodooI2CServices triggered rebuild

1. Rebuild permissions and kextcache required.

If you had installed kexts in L/E or S/L/E, this is the time to remove them.

2. Replace DSDT and config.plist. https://drive.google.com/file/d/1SxZFRCtSan5QDbuZI6rfSswC4l71-m-j/view?usp=sharing

3. Reboot.

4. Extract new sendme

i rebuild kexkcache in terminal via sudo kextcache -i / and reboot then got acpi table errors

[tphoto]

Can someone help me i can't install mojave it stucks at verbose.IMG_20191201_165045.jpg.zip

[nikhilrathore_1999]

how to run this code you've mentioned

Added in 24 minutes 14 seconds:

i rebuild kexkcache in terminal via sudo kextcache -i / and reboot then got acpi table errors

I followed what you've said no I got this error shown at boot attached below:

https://drive.google.com/open?id=1W1vTLOxGu29jSxHpjajC9kqb6vXIBpkG

[onemanosx]

[ref]nikhilrathore_1999[/ref], Remove SSDTs. The errors were there since the beginning even before using my DSDT.

[nikhilrathore_1999]

[ref]nikhilrathore_1999[/ref], Remove SSDTs. The errors were there since the beginning even before using my DSDT.

i've tried that i'll remove ssdt same thing happend before it was not stuck at boot but it stuck at boot the screenshot i gave you in which it is stuck at that point

[onemanosx]

[ref]nikhilrathore_1999[/ref], No idea. You need to troubleshoot. Try removing H_EC to EC rename. In clover.

[nikhilrathore_1999]

[ref]nikhilrathore_1999[/ref], No idea. You need to troubleshoot. Try removing H_EC to EC rename. In clover.

thanks thanks trackpad works thank you thank very much onemanosx

Added in 11 minutes 30 seconds:

thanks thanks trackpad works thank you thank very much onemanosx

one last thing can u fix battery drainage and slow boot issue

[onemanosx]

thanks thanks trackpad works thank you thank very much onemanosx

 

one last thing can u fix battery drainage and slow boot issue

1.You need to remove unwanted kexts and SSDTs first.

2.Optimise your clover by removing unwanted patches.

[nikhilrathore_1999]

1.You need to remove unwanted kexts and SSDTs first.

2.Optimise your clover by removing unwanted patches.

I removed the unnecessary kext and patched u've seen I guess but still take time and also can I use native audio it think my audio codec is ALC 255

[onemanosx]

can I use native audio it think my audio codec is ALC 255

Yes.

 

I removed the unnecessary kext and patched

No idea. You did not upload your new debug files.

[nikhilrathore_1999]

Yes.

No idea. You did not upload your new debug files.

(bluetooth always turned on off option not working and wifi QCA9377 wifi not working, mirroring also not working, airplay not working)

native audio fix and battery drainage fix left (If I remove any of the kexts then system stuck at boot or at login this is final working sendme) not sure about audio codec just check in sendme file it says alc255

Send me Nikhils-MacBook-Pro.zip

[onemanosx]

(bluetooth always turned on off option not working and wifi QCA9377 wifi not working, mirroring also not working, airplay not working)

Your BT and wifi card is not supported in any MacOS.

 

native audio fix

Use AppleALC + Lilu kext + correct layout ID. Make sure you have native AppleHDA kext (not modded).

Read guide in USEFUL LINKS

 

(If I remove any of the kexts then system stuck at boot or at login

I think you have 3rd party kexts in SLE. Remove them.

 

this is final working sendme

Your config is pretty much the same as before. You did not remove SSDT or Kexts at all. Many errors in your logs causing slow boot. You need to troubleshoot yourself. Edited December 2, 2019 by Guest

[nikhilrathore_1999]

Your BT and wifi card is not supported in any MacOS.

Use AppleALC + Lilu kext + correct layout ID. Make sure you have native AppleHDA kext (not modded).

Read guide in USEFUL LINKS

I think you have 3rd party kexts in SLE. Remove them.

I fresh install macOs catalina so i won't use any kext in SLE or LE all kext are in clover/kext/other

I've discovered one more bug brightness works but hotkeys not work and in keybord shortcuts no option of display were there for audio apple alc kextinstall int clover/kext/other what layout id should i use

Your BT and wifi card is not supported in any MacOS.

Use AppleALC + Lilu kext + correct layout ID. Make sure you have native AppleHDA kext (not modded).

Read guide in USEFUL LINKS

I think you have 3rd party kexts in SLE. Remove them.

[onemanosx]

1. Brightness hotkeys - Read guide in USEFUL LINKS

2. AppleALC Audio - Read guide in USEFUL LINKS. You need to find the correct id for your laptop. Test 1 id at a time after each reboot.

3. Using latest macOS will always be slow on a spindle hard drive. Change to SSD.

[nikhilrathore_1999]

1. Brightness hotkeys - Read guide in USEFUL LINKS

2. AppleALC Audio - Read guide in USEFUL LINKS. You need to find the correct id for your laptop. Test 1 id at a time after each reboot.

3. Using latest macOS will always be slow on a spindle hard drive. Change to SSD.

I'll use ssd from next month because of money issue btw which ssd u preffered(low price and effective)

Added in 41 minutes 21 seconds:

1. Brightness hotkeys - Read guide in USEFUL LINKS

2. AppleALC Audio - Read guide in USEFUL LINKS. You need to find the correct id for your laptop. Test 1 id at a time after each reboot.

3. Using latest macOS will always be slow on a spindle hard drive. Change to SSD.

audio works i followed guide for brightness hotkeys but that doesn't work

[nikhilrathore_1999]

1. Brightness hotkeys - Read guide in USEFUL LINKS

2. AppleALC Audio - Read guide in USEFUL LINKS. You need to find the correct id for your laptop. Test 1 id at a time after each reboot.

3. Using latest macOS will always be slow on a spindle hard drive. Change to SSD.

can u provide the solution for brightneas hotkeys because useful link guid method not works for me?

[onemanosx]

can u provide the solution for brightneas hotkeys because useful link guid method not works for me?

What is your EC method?

[nikhilrathore_1999]

What is your EC method?

ec0 to ec rename

[onemanosx]

ec0 to ec rename

 

[ref]nikhilrathore_1999[/ref], Obviously you did not read the guide. Else, you will understand the term EC method which was mentioned specifically in the guide.

That guide requires you to do the necessary for a working hotkey remapping. Each laptops are different. Good Luck.