icecold Posted September 30, 2019 Author Posted September 30, 2019 I noticed my hackintosh is booting from your Olarila sierra version usb, as it's the only way it doesn't give an error, therefore, what I did was to open Clover Configurator, mount the EFI on the USB and tried with all the layouts available for the ALC662, however none worked, then I also added your DSDT.aml to the EFI partition on the USB drive, and that also didn't work, I checked logs with bdmesg and it seems to load the DSDT the changes and correctly configure the layout ids I saved, in each attempt. THe HDMI is there, the AUDIO layout id is also saved and loaded === [ FixBiosDsdt ] ======================================= 7:787 0:000 VideoCard devID=0x67381002 7:787 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 7:787 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE 7:923 0:136 Audio HDA (addr:0x1B0000) setting specified layout-id=7 (0x7) 7:923 0:000 USBADR[1] = 0x1D0000 and PCIe = 0xFFFE 7:923 0:000 Patching DSDT: No sound devices are recognized though ... Added in 23 minutes 37 seconds: I Removed AppleHDADisabler.kext from S/L/E and moved it to Backup Extensions just in case but the sound still doesn't work .. the weird thing is VoodooHDA made it work ... I also placed the AppleHDA.kext under EFI/Clover/kexts/Other, on the USB drive EFI ... and still no sound ... The weird thing is under VoodooHDA it worked fine, except it misconfigured by itself ... all the time ...
icecold Posted October 1, 2019 Author Posted October 1, 2019 It's only recognizing my Logitech USB headset ... but not the Spica stereo out 3.5mm plug ... Green rear ... Added in 35 minutes 17 seconds: This is from a Controllers.plist is it possible to insert it into Clover's config.plist? Device 41712 Name 200 Series PCH HD Audio Patches Count 6 Find cKEAAA== MinKernel 16 Name AppleHDAController Replace 8KIAAA== Count 1 Find hoBwoQ== MinKernel 16 Name AppleHDAController Replace hoDwog== Vendor Intel
Administrators MaLd0n Posted October 1, 2019 Administrators Posted October 1, 2019 [ref]icecold[/ref], u just need inject layout-id -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
icecold Posted October 1, 2019 Author Posted October 1, 2019 [ref]MaLd0n[/ref], I did that with all layout-ids I've found in Resources for the ALC662 ... 5,7,11,12,13,15,16,17 None worked ... some worked for a while only with my USB Headset ... the others did nothing, I made sure AppleALC was on the EFI and loading before AppleHDA ... === [ FixBiosDsdt ] ======================================= 9:088 0:000 VideoCard devID=0x67381002 9:088 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 9:088 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE 9:225 0:136 Audio HDA (addr:0x1B0000) setting specified layout-id=11 (0xB) 9:225 0:000 USBADR[1] = 0x1D0000 and PCIe = 0xFFFE 9:225 0:000 Patching DSDT: 9:225 0:000 - [change EHC1 to EH01]: pattern 45484331, bin not found / already patched! 9:225 0:000 - [change EHC2 to EH02]: pattern 45484332, bin not found / already patched! 9:225 0:000 - [change EUSB to EH01]: pattern 45555342, bin not found / already patched! 9:225 0:000 - [change USBE to EH02]: pattern 55534245, bin not found / already patched! 9:225 0:000 - [change AZAL to HDEF]: pattern 415A414C, bin not found / already patched! 9:225 0:000 - [change HDAS to HDEF]: pattern 48444153, bin not found / already patched! 9:226 0:000 - [change XHCI to XHC]: pattern 58484349, bin not found / already patched! 9:226 0:000 - [change XHC1 to XHC]: pattern 58484331, bin not found / already patched! 9:226 0:000 - [change HECI to IMEI]: pattern 48454349, bin not found / already patched!
Administrators MaLd0n Posted October 1, 2019 Administrators Posted October 1, 2019 [ref]icecold[/ref], somee mobos(long time) have a ghost codec in some bios version -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
icecold Posted October 2, 2019 Author Posted October 2, 2019 ok, how do I get access to that "ghost" codec ...? This is an Ivy Bridge Motherboard ... so it's kinda old(but I added my decent AMD Radeon HD6870 and a robust cougar PS and Kingston Hyper DDR3 1600Mhz memory), I got it from my gf, and it worked perfectly with Yosemite ... with Sierra not to so well ... Asrock, the manufacturer states the codec is RealTek ALC662 ... but the chipset I read is Intel Series 6 C200 ... that's why I wanted to know if I can get a codec dump ... because I know sometimes they change chips in certain regions ... unless that Intel Chip uses the ALC662 ... I'm surprised how easy was with VoodooHDA ...
Administrators MaLd0n Posted October 2, 2019 Administrators Posted October 2, 2019 [ref]icecold[/ref], use voodoohda if applealc dont work -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
icecold Posted October 13, 2019 Author Posted October 13, 2019 Well it does work, just with my USB headsets, now to remove all my previous appleALC, and install a fresh VoodooHDA, what kexts need to go?
Administrators MaLd0n Posted October 13, 2019 Administrators Posted October 13, 2019 [ref]icecold[/ref], voodoohda + applehdadisable -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
icecold Posted October 19, 2019 Author Posted October 19, 2019 Finally! After struggling and wondering I fixed it and now it's working! Well the first thing I did was to update Clover on the boot USB to a newer version, 5088 worked fine, I attempted the latest but it completely hanged! So I downgraded it to 4297 and then tried 5088, that was some progress, because I noticed a Disabler after the HDEF entry in IOReg ... and found out the culprit was the DisablerAppleHDA.kext, that I deleted but somehow it was under /S/L/E/! I moved that copy somewhere else just in case, and then suddenly sound started working, but with the new bootloader it seems it doesn't show the layout ID is using, on the bdmesg output, so I had to check in IOReg, but I am trying to test other platforms(layouts), although sound is on Internal Speakers, but going through line out, to my BLuetooth speakerm so sound is fantastic. HDMI is also configured but isn't showing as an option, so maybe it works when I plug an HDM cable to my card, or it needs another layout. The only output is SPDif Digital Audio Out, I mean on the output options ... HDMI Is not even there. Thanks for all your help ... You guided me to the solution!
Administrators MaLd0n Posted October 19, 2019 Administrators Posted October 19, 2019 [ref]icecold[/ref], https://github.com/CloverHackyColor/CloverBootloader/releases -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
icecold Posted October 19, 2019 Author Posted October 19, 2019 Thanks it seems the latest one doesn't work ... probably overwrites essential kexts for my system ... but the one I am using works pretty good ... I will get rid of version 4287 ... BTW again for some reason the Sierra disk refuses to boot if I remove the USB installer flash drive, and if I try to boot with the old Clover, it seems something has changed, because it refuses to boot, so probably I will replace the EFI's Clover version 4287 on Sierra and see if I can finally boot from it. I get the dreaded boot error, so there's a minor thing that needs to be fixed ...
Administrators MaLd0n Posted October 19, 2019 Administrators Posted October 19, 2019 [ref]icecold[/ref], post one photo -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now