Olarila HackBeast Z390 DESIGNARE - Thunderbolt - Full DSDT patches - CLOVER - OPENCORE

[nosoapradio]

Hello. I have essentially the same specs as your Designare system (except Vega 56 vs your 64). I've been running this as a hackintosh for a while. It's pretty solid, but I think your method looks more desirable. My question, is if I redo my system with your method would I gain anything with going with Catalina or is Mojave the better (more stable) Designare/i9 setup? Thanks.

[MaLd0n]

[ref]nosoapradio[/ref], Olarila way is like on real mac, if u don't use a good dsdt, ur hack is not one real mac, our bios/uefi is not for macos, we need change many

[DEDECO]

[ref]DEDECO[/ref], creio que não

teem de ver sobre esse adaptador

Recomenda um outro? Vi num fórum que o Startech TB3 to TB2 está montando as unidades G-raid, mas não encontro dele no BR comprei a Z390 só pela TB

[luxus]

does the opencore config works? I am unable to boot because of memory problems (sure it is about the missing nvram on z390)

[MaLd0n]

[ref]luxus[/ref], work but is old version, u need update

use clover EFI version

[luxus]

[ref]MaLd0n[/ref], thanks for the info..

I think nobody got the Designare working with 0.5x open core working ..

there are a lot nvram problems.

so u don't plan to update it? maybe you are the one guy that can pull that trick

[MaLd0n]

[ref]luxus[/ref], i dont use oc for now, many bugs and missing good options for one real vanilla hack

[DEDECO]

[ref]MaLd0n[/ref], Estou usando tua pasta EFI, mas diferente da sua máquina, minha GPu é uma RX 590. eu preciso usar o EmuVariableUefi.efi ou não é necessário? quanto a questão do adapatador TB3 para TB2, estou esperando chegar outro para testar,

[MaLd0n]

[ref]DEDECO[/ref], funciona com ou sem emuvariable

[ginobambino]

Hi there,

I have the same hardware, just using a i7 9700K and different ram and I'm using your EFI to install Catalina on this build but I keep getting a black screen after I start the installation from the clover bootloader. When I say black screen I actually mean that my screen just doesn't get a signal anymore and turns off.

I don't even reach the Catalina install screen (where I can pick disk utility etc). I'm connected straight to the iGPU since I'm trying to run an AMD RX 5700 XT (hence trying to install catalina)

I've added the pikera bootarg in whatevergreen, since I heard this might help things but to no avail.

Actually it sounds like my display is just not picking up the signal even thought when I touch my keyboard I can hear the fans kicking off and the computer "waking up" it seems like it's a display driver issue

Any help would be greatly appreciated

[MaLd0n]

[ref]ginobambino[/ref], try without whatevergreen kext

[ginobambino]

Thank you for your reply, I appreciate the help.

But I'm afraid it's the same thing. I really don't understand it. I don't seem to find anyone else with the same problem. I've tried different bios settings, different bios versions, very plain EFI, very elaborate ones.

Basically, the way I see it the internal graphics turn off when it would normally start the catalina installer, I have the impression the mac installation app is actually happening, it's just not outputting anything to the screen.

I'd be happy to pay you to help me out.

[Slacky741]

Hey mate did you end up sorting this out? I am running similar hardware and getting the same issue, also trying through my iGPU to get it installed

[erroruser]

if using a 5700 xt weg is not needed in opencore an it works with 2 monitors HDMI an DP, the DP has to be on the far right of the card as this is the same for both intell an amd cpu

[ginobambino]

Hey mate did you end up sorting this out? I am running similar hardware and getting the same issue, also trying through my iGPU to get it installed

 

This is the closest I've found to the same problem. Gonna try this next:

[TBR]

Buenas tardes,

Tenía un problema parecido con una pantalla LG 27UK850. La tenía conectada por HDMI. La he cambiado a Display Port y se acabo el problema. No veía nada en pantalla pero todo estaba en marcha. Por fin he podido instalar High Sierra y el único problema que tengo es que tarda un poco más de lo normal en apagar. Por cierto he devuelto tres placas Asus Prime Z390-A y Gaming.

Saludos y gracias.

[Z4g0r]

WiFi & Bluetooth OOTB

1 - pull out Intel Wireless AC9560 module from Mobo (CNVI) and get the two cables and connectors from the back panel (use its after)

2 - buy a 3 Ctop BCM94360CS2 wireless WiFi card bluetooth (amazon) its the same chip used on Mac

3 - buy a EU_HOZLY BCM94360CD/BCM94331CD a PCI-e 1X, (amazon) pull out all 4 cables and connectors (too large)

4- put the BCM94360CS2 on the pci-e HOZLY and the 2 cables, getted out of the mobo, together , connect its

5 - Put the pci-e hozly in the hackintosh and connect the cable to the usb socket (F_USB) free and the exeternal antenna of the mobo to HOZLY

wifi and Bluetooth works like charms OOTB

[JuanRVZ]

I tried to boot your EFI... but my screen turns black. I also remove WhatEverGreen kext but nothing, I get the same problem

My gpu 5700 XT

Any idea?

Thank You!

[MaLd0n]

[ref]JuanRVZ[/ref], use last weg kext version(1.3.5)

WhateverGreen.kext.zip

u can try with agdpmod=pikera too[ref]TBR[/ref],

[Spiked]

I tried to boot your EFI... but my screen turns black. I also remove WhatEverGreen kext but nothing, I get the same problem

My gpu 5700 XT

Any idea?

Thank You!

 

I had this problem with my Asus 5700xt Blower when I was trying to boot a existing 10.15.1 installed system but it worked when i removed WhatEverGreen. Double check it.

For the install process I don't know if the 5700xt works, I installed mine using a Vega64 at the time.

[ref]MaLd0n[/ref], YOU ROCK! I just used your EFI, disabled WhatEverGreen and I booted for the first time with my 5700xt, I've spent 2 days trying to achieve this, thanks a lot!

Sadly I can't donate as much as I want at this moment because of some financial troubles, but I hope that you enjoy the little donation that I have sent you

Edited December 8, 2019 by Guest