Hackintosh Guide - Catalina / Big Sur / Monterey on Mobos Series 100, 200, 300, 400 and 500 with OpenCore Bootloader

[Abdulraheem]

sen me DSDT.aml Please

Send me Mac-Hds-MacBook-Pro .zip

[TwistedSystems]

[ref]MaLd0n[/ref],

Hey bro, need a patch for Open core now, donation incoming. Thanks in advance.

Edited September 14, 2019 by Guest

[MaLd0n]

[ref]Abdulraheem[/ref], u use some ssdts etc, not good

Added in 1 minute 12 seconds:

[ref]TwistedSystems[/ref], u need extract files with open core running, clover have some diff about regions fix etc

[TwistedSystems]

MaLd0n, Here you go, booted with OpenCore and ran it. File attached

Send me TwistedSystemsiMac-Pro1.zip

[MaLd0n]

[ref]TwistedSystems[/ref], here we go

DSDT.aml.zip

[rob88v]

@MaLd0n Here are my send me files for OpenCore for DSDT creation. I've been having trouble getting the iGPU to run connectorless for compute tasks, and I still get this error: [iGPU] Graphics driver failed to load: could not register with Framebuffer driver! I have tried putting in device properties for my iGPU but to no avail. I also have to use alcid=16 for my audio to work as it won't inject in OC normally. It's not a big issue, but I would like to keep the arguments as minimal as possible for my config. Thank you in advance for your outstanding work! PS: I am using 10.13.6 hopefully that won't pose an issue.

Send me Seans-Hack-Pro.zip

[TwistedSystems]

[ref]MaLd0n[/ref], Working with no issues. Thanks for the help again.

[MaLd0n]

[ref]TwistedSystems[/ref], i forgot one things, use it

DSDT.aml.zip

 

Added in 5 minutes 5 seconds:

[ref]rob88v[/ref], DSDT.aml.zip

use only dsdt + ssdt tbh3

DSDT.aml.zip

[rob88v]

[ref]TwistedSystems[/ref], i forgot one things, use it

DSDT.aml.zip

Added in 5 minutes 5 seconds:

[ref]rob88v[/ref], DSDT.aml.zip

use only dsdt + ssdt tbh3

 

Thanks @MaLd0n the DSDT works great! The only issue I have is that my iGPU still fails to load the driver, I must of done something incorrect on the framebuffer device properties as I keep getting the "failed to register to framebuffer driver" error, I have attached my config maybe there is an incorrect device id and platform id. I am using a GTX 1080Ti as the dGPU on 10.13.6 ( 17G8030) and my iGPU is the UHD 630 which I am trying to run as connectorless. With clover I used the Kaby Lake fake id, will I still need it with Opencore or should I be able to use the Coffee Lake id's?

config.plist.zip

[MaLd0n]

[ref]rob88v[/ref], u need a 59128086 and 59120003 for high sierra, shikigva=60 if need

[rob88v]

[ref]rob88v[/ref], u need a 59128086 and 59120003 for high sierra, shikigva=60 if need

Thanks that worked for me! Does opencore need anything special in the folder to load windows 10 properly it sees the entry but when I click it the circle spins for a second and it reboots automatically. Any thoughts on what I could be doing wrong?

[MaLd0n]

[ref]rob88v[/ref], need check in manual for some instructions, i think work

[telepati]

[ref]MaLd0n[/ref], I need a help OC DSDT. I used your EFI and its booted without any problem. Could you please help for creating OC DSDT? Thank you.

Send me Murats-iMac-2.zip

[MaLd0n]

[ref]telepati[/ref], DSDT.aml.zip

[telepati]

[ref]MaLd0n[/ref], you are like a . Thank you.

Added in 39 minutes 9 seconds:

[ref]telepati[/ref], DSDT.aml.zip

 

I test it now. No Bluetooth and USB hardware. Without DSDT is working but with DSDT no Bluetooth and USB hardware. I also checked DSDT and its available on config.plist.

I also get this on boot;

[MaLd0n]

[ref]telepati[/ref], use ssdts for usb and acpi warnings fix

Arquivo Comprimido.zip

u need drop OEM ssdts and put news, OC devs need add a easy way for it

[telepati]

[ref]MaLd0n[/ref], I added these SSDTs to ACPI folder added as an item to config plist. But it didnt change anything. No USBs and bluetooth. I realise another problem. I cant see my windows partition on OC boot screen. I am just seeing two drive 1. Mojave 2. Recovery.

Edit: I used the old method for USB and Bluetooth.(SSDT-UIAC.aml and USBKextAll.kext) it's working now. But I cant see windows drive on OC boot screen.

[MaLd0n]

[ref]telepati[/ref], with OC u need block OEM table with "TableLength"

https://i.imgur.com/tdfFXG4.png' alt='IMGUR>'>

and add edited oem table

Clover made it on the fly with option in ACPI tab

[telepati]

[ref]MaLd0n[/ref], Thank you.

[hoangtuau]

Please help me patched DSDT.

My hackintosh only iMac name

send-me.zip

[michaelanhvu]

I'm running RunMe.app and get an error.

[MaLd0n]

[ref]hoangtuau[/ref], extract files with opencore, not clover

Added in 20 seconds:

[ref]michaelanhvu[/ref],

--Run_Me

RunMe.app

[michaelanhvu]

Oh, it's error for computer name, i renamed and it's ok.

Here is my dump files.

Send me michaelanhvu.zip

[MaLd0n]

[ref]michaelanhvu[/ref], u have a dsdt full patched

[michaelanhvu]

[ref]michaelanhvu[/ref], u have a dsdt full patched

Why it's can't boot to opencore? So, i make a wrong way usb?