Catalina Hackintosh on Mobos Serie 100/200/300 / Full DSDT Patched with minimum amount of third-party kexts

[zak7300]

sir will this work on 10.15 ???

[MaLd0n]

[ref]zak7300[/ref], yes

[zak7300]

I just download ur clover folder but didn't see the DSDT file its empty sir ??

Added in 2 minutes 9 seconds:

do I need to send my send_me file plist file too ?

[MaLd0n]

[ref]zak7300[/ref], run app and post full dump after reboot with Olarila folder

[zak7300]

sir I gave my clove and DSDT link

https://drive.google.com/drive/folders/1i_Or8L-RhuoLLSSfyl_lVgw_Docp9pNN?usp=sharing

also gave u send_me.zip fie too

[MaLd0n]

[ref]zak7300[/ref], u use my full dsdt patched

[zak7300]

ok n plist is ok do I need to configure cause my confusion that plist mi8 not correct ?

[MaLd0n]

[ref]zak7300[/ref], just use Olarila foolder serie 300 instead ur bad efi folder

https://Olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip

[zak7300]

many many many many thx thx sir one more think does usb raise also fixed on your patch on lover ?

[Gallows1984]

[ref]Gallows1984[/ref], post send_me here

 

My Run Me file - Can you have a check and see if there is anything that may be slowing it down before i remove the second VII.

Thanks in advance.

Send me Catalinas-iPro.zip

[MaLd0n]

[ref]Gallows1984[/ref], DSDT.aml.zip

[itlowai]

Hello! MaLdOn, I'm new here. Just try to install macOS Catalina to my Asrock Deskmini 110. May you help to get correct config.plist, DSDT file and right kexts for running the machine smoothly. Thank You very much!

Machine Spec: Intel i5 6400T

Wifi and Bluetooth: Dell DW1820A

Mainboard: Asrock H110M-STX

Memory:8G+4G DDR4

itlowai’s iMac iolog.zip

[MaLd0n]

[ref]itlowai[/ref], Use Olarila Clover folder for your Chipset/Desktop/Notebook, reboot and extract new Send_me

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

[itlowai]

Hi! MaLdOn.Here is the updated iolog file. Please have a look. Thank You!

itlowai’s iMac iolog2.zip

[MaLd0n]

[ref]itlowai[/ref], u need extract new send_me, full dump

check here

--Run_Me

RunMe.app

[itlowai]

Hello! MaLd0n.I tried to run "Run Me" app again. But it fails to save the IOREG file...Just attached the EFI folder for your reference.Thank You Very Much!

itlo'sEFI.zip

[MaLd0n]

[ref]itlowai[/ref], i need dump not efi, see video

[itlowai]

I will try to reinstall the macOS to dump the file first, because it can’t dump the file using “runme” app. Thank You!

[itlowai]

Hello! MaLd0n. I finally generated the file. I always can't boot into the system getting memory panic. May you help me to look for the config.plist, kexts in order to get the correct files to boot into system.Thank You very much!

My system config: Intel i5 6400T

Wifi and Bluetooth: Dell DW1820A

Mainboard: Asrock H110M-STX

Memory:8G+4G DDR4

macOS installed into MVME SSD

Send me iMac.lan.zip

[Jackie. D]

Dear Admin! I'm on Catalina and I get some issues.

1. The wifi card won't work fine, Download and Upload speed are very slow. Some time it don't connected to wifi router. ( My wifi card is Broadcom BCM94360)

2. Some time My hackintosh is freeze, it take 3 to 5 second.

My system:

MotherBoard: Asus Z370-TUF Gaming Plus

Cpu: intel Core i3-9100F

DDr4 Corsair 8GBx2

Graphics Card: MSI Rx580 Gaming X

SSD M2 Transen 256 ( Catalina installed)

SSD sata Sandisk 480GB ( windows 10 installed)

Thanks You!

Send me Haos-iMac.zip

[Mushmuch]

Hi Daniel, You created a DSDT for me for iMacPro1,1 SMBIOS with Vega 56 that works well on Mojave (but lost ability to sleep for some reason). I'd like to upgrade to Catalina and OpenCore 0.5.2.

Do I need a new DSDT? I uploaded the send-Me archive.

Send me UnMacX-1.lan.zip

[MaLd0n]

[ref]Mushmuch[/ref], what happens with sleep?

[Mushmuch]

The display goes to sleep but the computer does not. It does not even try: all lights stay on.

Usually it takes 15 to 20 seconds to go to sleep but now it just won't.

"Prevent computer from sleeping automatically when the display is off" is not checked.

"Wake for network access" is not checked.

PowerNap is not checked.

pmset -g returns:

System-wide power settings:
Currently in use:
autorestart          0
Sleep On Power Button 1
halfdim              1
hibernatefile        /var/vm/sleepimage
proximitywake        0
powernap             0
networkoversleep     0
disksleep            10
sleep                15 (sleep prevented by cloudphotosd, configd, backupd, backupd, mds_stores, sharingd)
hibernatemode        0
ttyskeepawake        1
displaysleep         15
womp                 0

[MaLd0n]

[ref]Mushmuch[/ref], check this command

log show --style syslog | fgrep "Wake reason"

[Mushmuch]

This command does not return anything.

I looked in /var/log/powermanagement/ and found a power report. Here is what happens:

22:11:17.336611 +0100 powerd Entering DarkWake state due to 'Software Sleep pid=93':

22:11:17.336715 +0100 powerd [system: PrevIdle PrevSleep DeclUser BGTask SRPrevSleep kCPU kDisp]

22:11:17.340723 +0100 powerd [system: PrevIdle PrevSleep DeclUser BGTask SRPrevSleep IPushSrvc kCPU kDisp]

22:11:32.338329 +0100 powerd [system: PrevIdle PrevSleep DeclUser BGTask SRPrevSleep kCPU kDisp]

22:11:32.338379 +0100 powerd Summary- [system: PrevIdle PrevSleep DeclUser BGTask kCPU kDisp] Using AC

22:11:53.858899 +0100 powerd [system: PrevIdle PrevSleep DeclUser BGTask kCPU kDisp]

22:12:15.139101 +0100 powerd [system: PrevIdle PrevSleep DeclUser BGTask kCPU kDisp]

22:12:15.139226 +0100 powerd [system: PrevSleep DeclUser BGTask kCPU kDisp]

22:12:29.992499 +0100 powerd [system: PrevSleep DeclUser BGTask kCPU kDisp]

22:12:48.072250 +0100 powerd [system: PrevSleep DeclUser BGTask kCPU kDisp]

22:12:48.073606 +0100 powerd Kernel Idle sleep preventers: IODisplayWrangler

According to this: https://apple.stackexchange.com/questions/307151/significance-of-iodisplaywrangler-in-power-management-assertions#310992

It seems that it might be the display that prevents my Hack to sleep... but it's been sleeping before...

Anyway, can I use OpenCore with the DSDT you made for Mojave?