How to make a bootable Lion DVD

[Lord_Richard_2]

was a glitch and it finished the install. my trackpad did not respond during install procedure when it froze. i pressed a button on the keyboard and it "woke up" and showed the true status. i had to use hackBoot to boot to the partition after it installed (im assuming chameleon was deleted) and i had to connect a usb keyboard to enter setup. After i could not press continue (even after tabbing to it and it was selected) and my trackpad wouldn't work. i assume this is a ps/2 or usb problem as laptops use ps/2 to connect keyboard and trackpad. also, rmeoving the usb keyboard i plugged in caused a kp.

What is an easy way to install chameleon from windows (id rather not make another boot cd or usb flash drive bootable for it).

Edited August 2, 2012 by Guest

[Cassio]

USB may need DSDT patch http://Olarila.com/forum/viewtopic.php?f=19&t=634

Trackpad depends on model (ALPS, Synaptics, Elan), you may need other PS/2 kext.

[Lord_Richard_2]

USB may need DSDT patch http://Olarila.com/forum/viewtopic.php?f=19&t=634

Trackpad depends on model (ALPS, Synaptics, Elan), you may need other PS/2 kext.

 

Trackpad should be standard ps/2 device. it should have ps/2 support (as it is used and installed on older macbooks). I did not supply a dsdt on the dvd. i also have to reinstall chameleon 2r5 to get dsdt support back.

Well i found the chameleon installer for mac. Now i need to get it to boot to desktop.

How would i install the ps/2 support files or kexts from terminal of the boot disc? I can read/write to hfs+ from windows if i need to copy and files to the mac partition first. What kext should i install as well for ps/2 support. I dont wnat to just assume one is alright for lion and mess up.

[Lord_Richard_2]

I have tried this to enable keyboard and mouse, but trackpad doesnt seem to work.

I installed kexts to s/l/e and then booted to sl disc (lion now refused to let my trackpad work even though keyboard works when disc boots to installer) and repaired permissions using disc utility.

I used these kexts:

http://www.osx86.net/downloads.php?do=file&id=1448

Why would my trackpad now not work with lion dvd when it did previously ? I used "-v -x busratio=4 cpus=8" to boot.

I am getting quite frustrated with lion and it not recognizing my keyboard and trackpad....

[Lord_Richard_2]

No responses? No help?

I'm still stuck at pci configuration begin....

I did get another line past it using the boot flag pci=off and get the line "console 1024 x 768 @ 0xe1000000" but it still hangs after that which makes me believe its still same problem that is hanging me at pci configuration begin before...

[Cassio]

That kext is for Synaptics trackpad, if yours is not Synaptics, it will probably not work.

About "PCI configuration begin", try tip from post 2 (npci=0x2000). If it doesn't help, try this

http://netkas.org/?p=1053

[Lord_Richard_2]

Thx ill try it. Thx for the reply. I will try the netkas method and post how it goes.

[carpool 124]

Being niew to this, how do I access the iso files for Mountain Lion.

Thanks.

[artur-pt]

hello

here

http://Olarila.com/forum/viewtopic.php?f=27&t=1644

anyway u have a amd cpu so must a patched kernel...

good hack

[HossMedoGad]

Awesome

[hellomacos2]

how do i install this?